Hawk Driver's blog View Details
Posted by Hawk Driver | Jun 05, 2019 @ 09:46 PM | 862 Views
Here are some of my repaints. Very rarely do I leave the stock paint scheme on the plane. Repaints are half the fun of these foamies for me....Continue Reading
Posted by Hawk Driver | Jun 29, 2017 @ 09:32 PM | 3,462 Views
Sadly, my Freewing A-10 augered in due completely to "dumb thumbs" and ego. Started to perform a loop. At the top, a roll occurred and in effort to correct it, I put the wrong input in. At the bottom of the loop, I didn't realize I was inverted and when I went to pull out of it, the plane nosed directly into the ground with a resounding thump. The ego part was where I thought I could manage it instead of hitting the Auto-Level switch for the Eagle Tree Guardian I had onboard. Lesson learned. Pretty much a complete write-off.

Although it was a great design and I, more than anybody, needed it's stout gear design, I really preferred the scale look of the FMS's A-10 landing gear a tad more. Since I was currently lacking a large A-10, I went ahead and purchased the FMS rendition.

More to follow.
Posted by Hawk Driver | Jun 21, 2017 @ 04:13 PM | 4,232 Views
Here are some photos of my homage to The Boys from Syracuse. They got their A-10's in 1979 and I remember being excited, at the time, to see them fly over head. The unit had them for 10 years before transitioning to F-16's. That must have been a great time to be with that unit. Today, not so much. It's a drone unit now.
Posted by Hawk Driver | Jan 08, 2017 @ 11:11 PM | 4,710 Views
Really love this plane so far. Here are some simple things that can be done to improve the appearnce of this great little kit.

Most USAF F-16's are painted in a two tone camouflage scheme of Gunship Gray (FS 36118) over Neutral Gray ( FS36270). FW's colors are pretty spot on to the actual colors. Before applying the decals/transfers, I painted all of the black servos with Neutral Gray. The most imortant one is the one on the Tail, otherwise it hides the tailcode decal that will be applied over it. Home Depot's match of Neutral Gray is slightly different than FW's rendition but I had that paint, on hand and it is close enough for me.

The version I chose to do was the from the 466th Fighter Squadron with "HL" on the Tail. Missing from the sheet are the Fighter Squadron and Wing Emblems that go on the intake. I obtained the images online and printed them onto decal paper to apply on my plane. Those images are attached nut will have to be resized to fit the kit.

F-16 nosecones are normally a darker color than the Neutral Gray they join up to so I painted it slightly darker and sprayed it with Polycrylic matte clear which actually gives it the correct semi-gloss sheen.

Finally, although the colors are correct, the sheen is of a semi-gloss finish which isn't how the real ones are painted. I painted the entire airframe with Golden Super Loaded Matte Medium thinned with Windex Window cleaner at a 50/50 mix and painted on with a brush. This gives the plane the accurate very flat finish. This really changes the look of the plane and makes it seem less toylike. It also gives the impression of an uneven weathered appearance.

That's all for now. Thanks for reading.
Posted by Hawk Driver | Aug 09, 2015 @ 10:42 AM | 5,605 Views
Here is the Horizon Hobby UMX F-16 painted in the Original US Navy Aggressor scheme. Made some simple additions to enhance it's appearance. Added a captive AIM-9 to the Port wingtip and added an ACMI Pod to the Starboard tip. Also added a pilot's silhouette to the cockpit area. Since the model is relatively close in scale to 1/32nd scale, I used SuperScale Decals to complete this scheme.
Posted by Hawk Driver | Mar 30, 2009 @ 09:18 PM | 5,509 Views
Here's a photo of the GWS A-10. A build log is located at this link:

https://www.rcgroups.com/forums/show....php?t=1015638
Posted by Hawk Driver | Mar 16, 2009 @ 10:22 PM | 5,389 Views
Painted to represent one of the aggressor aircraft from Nellis AFB, before I crashed it into the trees. It will fly again, just have to find the time and motivation to repair it.
Posted by Hawk Driver | Mar 16, 2009 @ 09:04 PM | 5,229 Views
GWS Zero representing Tadayoshi Koga's A6M2 shot down over the Aleutian Islands early in WWII.