Posted by Fred1685 | Today @ 05:03 PM | 449 Views
I’ll post this again in classifieds. I’m looking for Traxxas Parts. I’m giving my 4-Tec new life and the carbon fiber upgrade. I can’t find the aluminum posts for the bell crank anywhere. Any advice is helpful.

Part number: Traxxas 4321x

Any hobby stores with vintage parts bins would help too.
Posted by slopeboulder | Today @ 02:58 PM | 842 Views
Two piece wings and tails. Click on "view all images in thread" to see all pics....Continue Reading
Posted by DBSkyout | Today @ 01:45 PM | 1,015 Views
How I preflight my DLG.

RC Sailplane, Discus Launch Glider (4 min 46 sec)

Posted by alex_nikiforov | Today @ 01:02 PM | 1,198 Views
RunCam Racer Nano 2 CMOS 1000TVL 1.8mm/2.1mm Super WDR Smallest FPV Camera 6ms Low Latency Gesture Control OSD for RC Drone

RunCam Racer Nano 2. Управляем жестами. (7 min 58 sec)


Link: RunCam Racer Nano 2
Posted by DutchRC | Today @ 12:01 PM | 1,297 Views
Halloa people

Time for a side-by-side comparison this time   
on paper the Foxeer Predator 4 & Runcam Racer 3 are very both very similar & capable Racing FPV camera's..
To this I should add that I generally very much prefer the Racer 2 & 3 from Runcam over other camera's.. BUT I am ready to be proven wrong!

Link to the Foxeer cam: Foxeer micro Predator 4 Full-Case version

Link to the Runcam cam: Runcam micro Racer 3

Racing FPV Camera's ? Foxeer micro Predator 4 vs Runcam Racer 3 (16 min 27 sec)

Posted by GroundControlRC | Today @ 09:10 AM | 1,592 Views


Review Part2 - Volantex Sport Cub 500 RTF w/Gyro - Tips, Stalls, & Manual Mode

Volantex Sport Cub 500
https://www.banggood.com/custlink/DmGmUiY16o

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

Here is a link to the Video:
https://www.youtube.com/watch?v=G1ZQFa8t5ps

I really like these Micro EPP Planes because they are so durable and easy to fly with Gyro Stabilization.
I also like the fact that they have an Expert or Manual Mode setting to really have Fun!
Let's take a look at the Features and then get it into the air and see how it performs.
We'll evaluate the stock setup can see if any adjustments are necessary.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #VolantexSportCub500 #SportCub500 #SportCub #SuperCub500 #SuperCub #Cub #V761 #V765

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Volantex Sport Cub 500
https://www.banggood.com/custlink/DmGmUiY16o

Spare Parts: ***These Parts are for the Eachine Mini P51D Mustang but I believe they are compatible.

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/3_7V-360mAh...47791920140372

Eachine 3.7V 380mah 25C Lipo **I use these in the Eachine Mini P51D Mustang with no problem
https://www.banggood.com/Eachine-3_7...47791920140372

Brushed Motor 10mm Hollow Cup for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood....Continue Reading
Posted by Old_Pilot | Today @ 07:42 AM | 1,681 Views
Down to control horns, push rods, programming, etc......I did this one to honor two good friends.one crewed S-3's on the America, and the other is Joel Maddox.....hence the tail art.....LOL
Posted by Tazkiller85 | Today @ 06:04 AM | 1,787 Views
Yep Les Amis,
Faut bien s'occuper ... lol ! Bon, voici une petite vidéo qui change un peu des habitudes . Après avoir dépouillé ma serre qui tombait en ruine, je me suis retrouvé avec moult tubes (il m'en reste encore ) que j'ai décidé de recycler . Résultat, un petit parcours FPV pour tiny et cinéwhoop afin de pouvoir piloter en cette fâcheuse période de confinement. Pour fêter ça, un petit concours improvisé pour vous faire plaisir et vous occuper quelques minutes !
Bon Film à Tous ... Merci de votre soutien et surtout ... Bonne chance !

Tinyhawk II Race et HGLRC Veyron 3 en CONFINEMENT ! Faut bien s'occuper ... lol (11 min 40 sec)


Concours du 28/03 12h00 au 03/04/2020 12h00
- Un seul commentaire par personne
- Répondre à la question posée sous cette vidéo (seulement sur youtube )
- Tirage au sort dans la vidéo du 04/04/2020
- Cadeau surprise adapté au gagnant

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
- EMAX Tinyhawk II RACE : http://bit.ly/2IP7O4J
- Batteries 450mAh X5 : http://bit.ly/3cRiZY2
Coupon remise tazkiller8 chez HGLRC ( VEYRON 3 )
- HGLRC VEYRON 3 4S/6S caddx ratel (chez HGLRC) : http://bit.ly/38ON6w8
- HGLRC VEYRON 3 4S/6S CADDX VISTA (chez HGLRC) : https://bit.ly/2UnC5Nj
- HGLRC VEYRON 3 4S caddx ratel(chez Banggood) : https://bit.ly/3944A7P
- HGLRC VEYRON 3 6S caddx ratel(chez Banggood) : https://bit.ly/397jRFc

- TABLEAU DES PROMOS ET...Continue Reading
Posted by Tazkiller85 | Today @ 06:03 AM | 1,788 Views
Yep Les Amis,
De mieux en mieux !!! Encore une excellente surprise avec cette nouvelle mise à jour Flysky pour la NIRVANA NV-14 ! En effet, Underground FPV nous a un peu abandonné sur ce coup là mais Flysky continu à améliorer son produit, donc si vous avez fait comme moi et commandé votre Nirvana en Flysky, voici une MAJ qui va vous faciliter la vie et vous occuper en cette période de confinement. Décidément une excellente radio, critiquée dès sa sortie par beaucoup mais très largement adoptée depuis par de nombreux pilotes ! Pour le moment ma radio préférée vous le savez ...
Bon Film à Tous et Merci de votre soutien .

Nirvana NV14 Upgrade - TUTO Mise à jour Multi protocoles / Bitmap - Le top ! (29 min 17 sec)


NOTATAZ : 19/20 Ma préférée !!!

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Flysky FS-NV14 ( COUPON BGfs14 ) : https://bit.ly/2UggPKx
- Hobby Porter JP4 in 1 (Drone Fpv Racer ) : http://bit.ly/2U3EoGI
- URUAV TMX5 4 IN 1 : https://bit.ly/39g4ES4
- VENTES FLASH RC : http://bit.ly/2uxItrM

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://bit.ly/2OiQMPF

- Mise à jour ( Page Firmware ) : https://github.com/open-flysky/NV14-updater/releases
- Site pour Images : https://www.air-rc.com/aircraft/Happ...obula6_mobula6
- Vidéo mise à jour...Continue Reading
Posted by Tazkiller85 | Today @ 06:02 AM | 1,803 Views
Yep Les Amis,
Une Bugatti volante ?!?! lol . Comme je vous en avais parlé dans ma vidéo du Tinyhawk II Race, voici le HGLRC VEYRON 3 . Un Cinewhoop plutôt efficace dès la sortie de la boite. En effet, une fois bindé et avec un minimum de préparations sur betaflight, il est opérationnel ! Pas de mauvaise surprise donc et au contraire très agréablement surpris par le travail fourni par HGLRC, un appareil de bonne qualité et surtout un excellent support sur le site internet. Non seulement on pourra trouver toutes les pièces détachées mais on y trouve également une notice complète sur l'engin et ses réglages fondamentaux ! En bref, même s'il n'est pas le moins cher des cinéwhoop actuels, il est performant et très rassurant ... Affaire à suivre ... Bon Film à Tous et Merci de votre soutien .

HGLRC VEYRON 3 - Review Test Démo - Cinewhoop léger et efficace (27 min 25 sec)


NOTATAZ : 18/20 Une bonne surprise .

Niveau : Débutants et Confirmés
Les + : Réactif, Précis, Très stable, Autonomie correcte, Doux et puissant, Très bonne qualité d'image, VTX performant .
Les - : Pas le moins cher des cinewhoop, A voir sur d'autres tests ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
Coupon remise tazkiller8 chez HGLRC ( VEYRON 3 )
- HGLRC VEYRON 3 4S/6S caddx ratel (chez HGLRC) : http://bit.ly/38ON6w8
- HGLRC VEYRON 3 4S/6S CADDX VISTA (chez HGLRC) : https://bit.ly/2UnC5Nj
- HGLRC...Continue Reading
Posted by hobiepilot | Today @ 01:26 AM | 2,486 Views
For those who have asked about my previous day job (and nights, and weekends..), the short answer is Electronics. A slightly longer answer: A little bit of everything. And as to some of the details?:

From age 13 I was tinkering with Electronic Experimenter kits, then put together my first RC Tx and Rx kits at 15.. and other related gizmos thru HS. Joining the Army for 4 years in 1970 (yeah, just shoot me..), I got a year of good electronics school in the ASA at Devens. Theory thru transmitters, receivers, antenna systems, and specifically DF, ECM, and even worked avionics during half of my year in Vietnam. When I got out, I worked as a Field Engineer repairing and installing information systems (1st Electronic Store Information System in Indiana).. then the 1st Automated Teller terminals in Indiana. Got my 2nd class FCC and started a company to do CB repairs, followed by 2-way, and another 2 years of avionics, and some cool High-Energy Physics work at Fermi-Lab. I worked at the 2nd oldest PC store in the US, where we stuffed and soldered the components, and repaired VERY EARLY personal computers. One of mine so advanced to have a 5MB hard drive!! (Yeah, I know, funny huh!) In 1982 I started my consulting business, and designed a full duplex S-100 communication board, to link my customer as the 1st to use direct computer billing to Blue Cross/Blue Shield. Helped another company sell millions in stock, with my 6 prototype battery powered CMOS smart terminals...Continue Reading
Posted by microbuilder | Today @ 12:02 AM | 1,644 Views
Posted by Hobby Details | Yesterday @ 11:07 PM | 2,727 Views
Best-selling products:
8AWG (1650/0.08) OD:6.8 1m
10AWG (1050/0.08) OD:5.5 1m
12AWG (680/0.08) OD:4.5 1m
14AWG (400/0.08) OD:3.5 1m
16AWG (252/0.08) OD:3.0 1m
18AWG (150/0.08) OD:2.3 1m
20AWG (100/0.08) OD:1.8 1m
22AWG (60/0.08) OD:1.7 1m
24AWG (40/0.08) OD:1.6 1m
6AWG(30/0.08) OD:1.5 1m
Two colors, black and red.
For more Wire and Connector information, see the home page: RC Drone Wire Connector Manufacturer
Posted by slopeiron | Yesterday @ 09:36 PM | 3,071 Views
I just had to build another one of these for the Cosmic Wind, so I figured I'd throw it up here. I used to use a simpler method which was basically a U shape piece of 1/8" piano wire with a flat piece of brass stock soldered in the middle. I found that that configuration was prone to fail on a hard landing and could slip if the solder broke free. So I started making them this way. I use these in my slopers and in power planes up to about 15 lbs. Beyond that, I would recommend dual elevator servos.

I've found that when bending 1/8" piano wire the center of the wire will be about 5/16" beyond where I clamped it. I will qualify this with the fact that the jaws on my Harbor Freight vise are misaligned by about 1/16" and I hold the torch against the front jaw. So if the jaws on your vise are aligned properly, the bend might be closer to 1/4" for you.
Posted by jmxp69 | Yesterday @ 07:30 PM | 3,189 Views
Ok, this is a nice plane...
Extreme Flight Vanquish MKII F3A RC Pattern Plane First Look (18 min 49 sec)

Posted by TMacFPV | Yesterday @ 04:21 PM | 3,467 Views
When's the last time you calibrated the voltage and current for your FPV quadcopter?

Simple steps to fly longer & save your FPV battery, that way, you won't waste money needlessly buying more batteries.

Betaflight voltage & current meter calibration with a bonus of transmitter audible alarms setup to warn you of low FPV battery voltage and remaining current capacity without having to watch your OSD!
FPV Battery Voltage & Current Calibration (FLY LONGER!) (13 min 58 sec)

Posted by Shoveopoly | Yesterday @ 04:13 PM | 3,492 Views
Here is the pic.
Posted by jetpilotrich | Yesterday @ 03:32 PM | 3,563 Views
Introducing the New E-Flight A-10 THUNDERBOLT II Twin 64mm, 6s Powered, 100+ mph EDF Jet from Horizon Hobby.

The first video is the intro video that introduces the entire 5 videos in the series on this epic model.

For everyone staying at home, I put together this comprehensive Video series on the new E-flite A-10 THUNDERBOLT II!
I intended to give some content for folks to pass the time in a comprehensive "Series Format" .... Thanks for commenting, liking and subscribing to RCINFORMER.... Enjoy

Thank you for supporting RCINFORMER by purchasing thru our New affiliate program links:

A-10 Thunderbolt II 64mm EDF BNF Basic with AS3X and SAFE Select version Available at: https://bit.ly/2QN14sd

A-10 Thunderbolt II 64mm EDF PNP Version Available at: https://bit.ly/33NCgFU

This model assembles fast, flys fast & features retractable landing gear, flaps & AS3X flight Stabilization technology.

Thanks for watching and supporting RCINFORMER !

LIPO PACKS USED IN THIS REVIEW:
-22.2V 3200mAh 6S 30C Smart LiPo Battery: https://bit.ly/2UD1EKf
-22.2V 4000mAh 6S 50C Smart LiPo Battery: https://bit.ly/2UkmJKL

SMART CHARGERS USED IN THIS REVIEW:
-Smart 30A 540W Power Supply: https://bit.ly/3anF8LY
-Smart S1200 DC Charger, 1x200W: https://bit.ly/2vPYbj8
-S1500 DC Smart Charger, 1x500W: https://bit.ly/2WGbsWC

Full Smart Charger & Battery review coming soon to RCINFORMER!

E-flite A-10 THUNDERBOLT Twin 64mm EDF Jet - 5 Part Video Series Intro By: RCINFORMER (4 min 19 sec)


-Unboxing Video:
Eflite A-10 THUNDERBOLT II 64mm Twin 100mph+ EDF Jet Unboxing By:RCINFORMER (22 min 36 sec)

-Assembly Video:
Eflite A-10 THUNDERBOLT Twin 64mm 100MPH+ EDF Assembly Guide By: RCINFORMER (46 min 43 sec)

-Maiden Flight Video:
Eflite A-10 THUNDERBOLT II Twin 64mm EDF Jet Maiden Flight By: RCINFORMER (13 min 43 sec)

-Ordnance flight Video:
Eflite A-10 THUNDERBOLT II 64mm Twin 100mph+ EDF Ordnance Flight By:RCINFORMER (9 min 22 sec)

-Grass Field Ops Video:
Eflite A-10 THUNDERBOLT II Twin 64mm GRASS Field Demo By: RCINFORMER (12 min 32 sec)