Posted by Old_Pilot |
Mar 28, 2021 @ 06:33 PM | 14,426 Views
30" WS, (2) 70mm Fans w/ 3500kV motors, 65Amp ESC's, Lemon 6 channel receiver, (2) 2600 mah 50 C 4S batteries, 19 gr metal gear digital servos.
50% KF-2 airfoil
Maiden next week
Posted by Old_Pilot |
Mar 27, 2021 @ 10:08 AM | 16,376 Views
Found a couple of previously flown 70 mm fans...so I mashed together the Einzpfeil and the Vulcan
30" WS, (2) 70mm fans, KF-2 wing (what else...lol)......Nacelles are Lenny's Sub Shop drink cups
I cut it out yesterday afternoon. Depending on the paint job, I could possibly finish it today
Posted by Old_Pilot |
Mar 25, 2021 @ 10:28 AM | 12,691 Views
Because I drove her sister into the ground like a tent stake......got into the sun and everything went white....things happen much too quickly at 30 feet and 100 mph......
Posted by Old_Pilot |
Mar 20, 2021 @ 07:46 AM | 19,836 Views
My friend Thomas B. , a teacher in Cologne Germany, sent me this...The Einzpfeil is now famous.........LOL..Oh, Flugmodell is the largest model airplane magazine in Germany
Posted by Old_Pilot |
Mar 16, 2021 @ 01:24 PM | 18,579 Views
So I was bored.......cut and built a CG Balance frame....$2 in material. The ones I saw on line cost anywhere between $17 to $150......took about an hour to draw and program it, and a little more than an hour to cut it
Posted by Old_Pilot |
Mar 12, 2021 @ 09:11 AM | 17,232 Views
I didn't like the first one....not very rigid....so the old engineer in me took over and I built a beam......
Posted by Old_Pilot |
Mar 03, 2021 @ 08:05 AM | 14,433 Views
So I made an adjustable cradle for airplane fuselages.......some 1/4" ply, some screws and wing nuts, and some foam pipe insulations