JohnCC's blog View Details
Posted by JohnCC | Sep 24, 2019 @ 12:23 PM | 1,102 Views
FullSpeed Toothpick PRO 120mm 2.5mm Bottom Plate F4 FPV Racing Drone (aff)
US $119 with coupon code BG10New

Video Reviews

FullSpeed "ToothPick" Pro 4s Micro Drone (10 min 37 sec)

Main Specifications

● Weight: ~65g
● FC: FullSpeed FSD412 (F411 FC)
● Camera: Caddx Micro F2 Camera
● VTX: FullSpeed FSD TX600 25mW-600mW
● ESC: FSD412 (1-4S ESC) BLHELI_S 4in1 ESC Dshot600
● Motor: 1106 4500KV

Battery Strap & Camera Setup

I tossed the included straps, as they were of low quality and too short. Routed ones I had over the top of the frame that way the entire bottom is free for a rubberized battery grip. Be careful when you setup the battery strap like this, you don't want the strap to be pulling on the esc part of the stack at all which means you'll need to finagle it to run as flat as possible across the bottom.

The 3D printed TPU canopy is great because it's hard to break but as you can see the camera is kind of just held in there not by much. The whole canopy flexes quite a bit which can be jello inducing. One great suggestion by a dude over at RCGroups forums named soloprofan is to put some zip ties on the front of the mount and that should help to keep it from moving around so much and I've done that and can see noticible improvement.

VTX Setup

After you get the battery strap sorted, you're going to want to unlock the FullSpeed FSD TX600 video transmitter for the best video reception. TX600's factory set...Continue Reading
Posted by JohnCC | Jul 22, 2019 @ 12:11 AM | 3,273 Views
Diatone 2019 GT R349 TBS VTX Edition 135mm 3 inch 4S FPV Racing RC Drone (aff)
US$149.99 Promotion Sale From July 16 to July 31

Video Reviews

Diatone 2019 GT R349 TBS VTX Edition (Setup & Flight Review) (12 min 51 sec)

Main Specifications

● Weight: 130g
● FC: Mamba F405mini/MPU6000 ;OSD;16M Flash;BEC
●Camera: RunCam Micro Swift
● ESC: Mamba F25 /25A 4S ESC Dshot 600
● Motor: Mamba Racing MB1408 4000KV


...Continue Reading
Posted by JohnCC | Jul 19, 2019 @ 07:04 PM | 3,376 Views
Happymodel Sailfly-X 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone (aff)

Coupon Code: BGSailflyX

Video Reviews

SailFly-X Betaflight tabAuxiliary Modes Issue - How to Fix! 🛠️ (7 min 4 sec)

Main Specifications

● Crazybee F4 PRO Flight Controller 2s, 3s
● 25mW VTX 700TVL Camera
● EX1102 8500KV Motor
● Onboard Frsky Receiver; SPI BUS receiver Frsky D8/D16 switchable

Comments + Criticism

In progress.


...Continue Reading
Posted by JohnCC | Apr 26, 2019 @ 05:25 PM | 2,585 Views
The ToolkitRC M8 / Hobbymate D6 Elite provides an all-in-one hobby electronic toolset and charger for your drone workbench or field.

Not only can you can use it as a 300w 15amp charger, it's a step-up power supply, a receiver tester, a battery resistence checker, and so much more. I bought it, and overall I'm happy with it.

ToolkitRC M8 / Hobbymate D6 Elite Charger & Tools (17 min 0 sec)

► Banggood:
► GearBest:
► Amazon:
Posted by JohnCC | Mar 26, 2019 @ 03:12 PM | 12,933 Views
I'm excited. Mobula 7 HD newer batch of stock is preordered for upcoming review on my channel!

I got a coupon for you guys and it's a pretty good deal. Caddx Turtle V2 HD camera costs about $65 by itself and the regular Mobula7 costs about $90. You get the newer frame on the HD, canopy, motors, f4 flight controller, and juicy high definition whooping. Coupon code for Mobula 7 HD is ttxbg10 will make it $144.90 Just make sure to pick the correct receiver from the CN warehouse.

Full disclosure: it's an affiliate link; but this is an actual good deal if you're looking for Mobula 7 HD.
Posted by JohnCC | Mar 07, 2018 @ 10:08 PM | 28,092 Views
DJI Mavic Pro Nor'easter Flight ❄️ (3 min 58 sec)

I got to take my DJI Mavic Pro out today and captured some great footage of the nor'easter. I love flying in the snow....Continue Reading
Posted by JohnCC | Nov 08, 2017 @ 08:02 PM | 28,971 Views
JJRC has come out with two Christmas theme micro drones that are great for stuffing the stockings: The "H66 X-MAS Egg", and "H67 Flying Santa Claus." This review covers both of the JJRC family of holiday drones and compares them so you can make a more informed choice on which one to buy.

JJRC H67 Flying Santa & H66 X-MAS Egg Christmas Drones (16 min 20 sec)

🎅JJRC H66 X-MAS Egg:
🎅JJRC H67 Flying Santa Claus:

Overall, the Flying Santa Claus is my favorite. After the holidays are over, it's prime for modification, easy motor replacement, FPV, removing the sound, etc. It's also cheaper than the egg drone. However, the egg has a surprisingly good 720p camera with a really unique form factor. It's also very easy to control with the gravity-sensor wand.

More info about these here at the master thread:
Posted by JohnCC | Jul 27, 2017 @ 01:30 AM | 30,533 Views
Posted by JohnCC | Jun 16, 2017 @ 12:38 AM | 32,595 Views
What a day! I have been fortunate enough to receive the new MJX Bugs 8 directly from MJX themselves for review and demo flight. In this video I cruised around using my FatShark goggles. I received the entire Bugs 8 kit -- headset, receiver, the works, but I wanted to just give the fatsharks a try since that is I how I *always* do FPV with my racers. Here are the results!

MJX Bugs 8 FPV Flight (Fatshark Dominator V3) (6 min 49 sec)

And here is the full review, with the MJX goggles:

MJX Bugs 8 Racing Quadcopter (18 min 59 sec)
...Continue Reading
Posted by JohnCC | May 11, 2017 @ 02:37 PM | 32,290 Views
I just got my RunCam 3 that I purchased and I'm ecstatic! It's a little beast of a camera for sure. It gets hot as hell when wifi is turned on, though. But I'm not planning on using it often with wifi enabled anyway. I made a few time lapses for fun with it earlier and the video quality is quite good. Hope I can do a full comprehensive review soon.
Posted by JohnCC | Dec 09, 2016 @ 04:09 AM | 38,024 Views
FuriBee F3 32-bit Brushed Flight Controller Build Blog Article!

This is a brand new product from GearBest for building your own micro quads. $23 for an F3 board. I'm going to be building a few tiny whoops using these parts from gearbest and will be blogging about my results here. This is a very, very great price and probably the cheapest F3 micro board you're going to find online right now. They have it in both DSMX and FrSky RX.

I'll be doing a build with this board soon, so watch this space!

Build Specifications

F3 FC Board:
H36 Props:
F001 Camera Holder:
Furibee F03 AIO camera:
JJRC H36 frame:
Motors: 19,000kv Brushed

FuriBee F3 32-bit Brushed Flight Controller // FAST "Tiny Whoop" build! (12 min 54 sec)

The Build Adventure

1. Flashed betaflight by choosing SPRACING F3, BF 1.01, baud rate of 115200 with full chip erase selected. No bootloader shorting required.

2. Went to receiver -> changed AETR1234 to TAER1234 to fix the throttle being "wrong" for my X9D+ -- this will confuse the hell out of you if you try to set this up in either cleanflight or betaflight and you don't do this step. Both...Continue Reading
Posted by JohnCC | Nov 24, 2016 @ 12:57 PM | 33,665 Views

Deal: Deals everywhere! I'll pick some of my favorites and post them soon.


Deal: 4S 70C 1300mah Graphene Battries. US only $13.99 each!
Posted by JohnCC | Nov 04, 2016 @ 03:41 AM | 50,278 Views
FuriBee F90 90mm Wasp Mini RC Racing Quadcopter

This is a new GearBest brand product due to ship very soon! I'm very excited for it and hope to get a chance to give all of you a great and informative review of this soon. Watch this post for discussion and updates and special 11.11 flash sale.


The FuriBee F90 quadcopter is like a wasp, flying furiously with adequate agility. Its amazing propulsion system can be powered by 30C battery, and its brushed F3 flight controller supports 1 - 3S power supply. More importantly, it is armed with an omnipotent receiver which is compatible with various protocols.

What's Different
Version 1: including DSM Receiver
Version 2: not including FrSky Receiver
Version 3: including FrSky Receiver, transmitter, and FPV Goggles

The colors of propellers and propeller guards are subject to stock availability.
Brand name: FuriBee
Model: F90
Size: 90mm

SP Racing F3 EVO Brushed Flight Controller
- It can be powered by up to three LiPo cells
- Supports signal input of PPM, SBus, DSM receivers
- Equipped with a buzzer and you can set the voltage of alarm
- MPU6050 Gyro / Accelerometer
- Micro USB connector for programming

Omnipotent DSM Receiver
Compatibility: DHT, DFT, DJT, XJT, X9D plus, and X9E protocol
RSSI: yes
Distance: 1.5km ( outdoor ) / 300m ( indoor )
Interface: PPM, SBus output
Voltage: 3.0 - 3.6V
Current: 100mA
Size: 9.5 x 1mm

8520 Coreless Motor
Motor diameter: 8....Continue Reading
Posted by JohnCC | Oct 22, 2016 @ 12:54 PM | 34,884 Views
In this video, I review the JJRC H36 quadcopter / drone, a micro quad for under $20 that can be quickly and easily modded with fpv. A great blade inductrix alternative.

JJRC H36 Drone FPV (Tiny Whoop/Blade Inductrix Clone) (6 min 54 sec)

Posted by JohnCC | Sep 24, 2016 @ 04:16 PM | 38,692 Views
Syma X5UW is a brand new addition to the Syma series for 2016, sporting wifi-fpv, a brand new look, and altitude hold. The camera is 1MP, and has been designed to clip on/off the quad easily. It comes with a 4GB sd card so you're ready to start recording immediately. Finally, it features one-key take off and landing.

SYMA X5UW 2.4G Remote Control FPV Quadcopter (7 min 49 sec)
...Continue Reading
Posted by JohnCC | Aug 04, 2016 @ 01:13 PM | 34,086 Views
I have received as a contest winner, courtesy of, the newest brushless XK drone, with FPV and 3D flight.

Brushless motors
a FPV camera
XK transmitter and FPV-screen
Inverted / 3D flight

First I present to you the unboxing and a close up of everything. This will be a two part review, first a quick flight and then a more in-depth review a couple weeks later after using it.

Posted by JohnCC | Apr 07, 2016 @ 01:41 PM | 36,022 Views

The newest version of the popular Hitec X2 AC Plus charger is on the market with some special added features. X2 AC Pro provides up to 200 watts of power in AC mode, and includes a new built-in heavy duty 60 watt soldering iron.

Twin Channel Charger with Two Independent Circuits
Input Power Source: 11-18V DC or 100-240V AC
DC Mode Output; 200W Port A; 100W Port B; 300W Total Output
AC Mode Power Distribution Mode, 200W Total Output
Built-in Switching AC Power Supply
Includes 60W Soldering Iron, 400 to 840F, USB support for PC and Wi-Fi Smart Phone Interface.

Video Guide:
1:50 - Battery Charging Basics
3:55 - Battery Charge Memory Options
5:07 - Power Output Allocation
6:36 - Battery Resistance Analisys
9:22 - Final Overview
10:53 - Fan Demonstration
Posted by JohnCC | Mar 13, 2016 @ 07:49 PM | 36,184 Views
It's taken me a few months since purchasing the Chroma at the beginning of December, but I finally have the AP/FPV setup I want out of it. I put together a video guide that explains how I took the Yuneec GB203 gimbal and wired it up a TS832 video transmitter. I love this setup.

Posted by JohnCC | Jan 23, 2016 @ 09:06 PM | 36,118 Views
I had a blast today flying in Winter Storm Jonas. Took my Blade Chroma out with a brand new GB203 gimbal. I'm impressed as hell with the stability and results from this gimbal and GoPro Hero 4k Black.

Before I took off, I used scotch tape and sealed up all of the vents AND the power switch on the Chroma. I'm not sure if this is necessary, but I feel like covering those vents is a good idea as you can see some parts of the fc board are exposed in the front at the very least.

Other than that, the Chroma is a trooper in Stability Mode in this type of weather. I was running the CamCarbon props by Carolina Dronz which most definitely helped out.

You can see the wind pushing against me, but this video is amazingly stable for the conditions... I hope to do a lot more videos in the future.

Blizzard Jonas 2016 / Chroma Drone / GoPro 4K & GB203 (2 min 36 sec)

You get bonus points if you are able to name the music track used. ...Continue Reading
Posted by JohnCC | Oct 03, 2015 @ 06:26 PM | 36,472 Views
Here is my video 'review' / instructional guide on how to modify the 350QX for long range, quality FPV downlink.

The whole build is really easy to do once you know exactly how it works and you get a really powerful setup. It also resolves an issue with the 350QX GPS not having enough shielding with a noisy camera.

  • Convert your Blade 350 qx 1/2/3 into an FPV body.
  • You can integrate your OSD and A/V transmitter.
  • No more wires hanging. This is a very clean looking setup.
  • Carbon fiber canopy helps shield the GPS receiver from interference from cameras & adds space for electronics.
  • Carbon Fiber A/V transmitter compartment along with graphite RF shield blocks 90% outgoing RF increasing the range and quality of your video downlink.

Size of A/V transmitter compartment:

L 2.5" W 1"5/16 H 10/16" L 63mm W 33mm H 15.9
The A/V transmitter compartment can hold Boscam Ts832 600mw, Immersion RC 600mw, Fatshark 250mw transmitters and anything similar in size or smaller.

The canopy and A/V transmitter case along with graphite shield and antenna terminal can be purchased individually.

Package Includes:

1x carbon fiber canopy
1x carbon fiber A/V transmitter case
2x templates
1x external antenna terminal
1x graphite shield
1x installation guide

You can buy any of the pieces separately or all at once. The video guide I've created explains ALL of the hardware and exact setup based on his specs; however you are free to use whatever you like that will fit into the case! It's a pretty big case, and the carbon fiber canopy is a valuable addition all on its own.

Any comments or questions are welcome!