myrcmodel's blog View Details
Posted by myrcmodel | Aug 07, 2019 @ 04:47 AM | 1,163 Views
Quite busy recently.

The Jumper T16 Plus with hall gimbal is available, check here https://www.rc-wing.com/jumper-t16-h...ansmitter.html

Seperate hall gimbals for T16 is availabl here. $15 for one pair!!!!

Main Features:
STM32F429BIT6 MCU
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Compatible with JumperTX and OpenTX firmware
Wheel menu button
Hall Sensor Gimbal
Multi-protocol transmitter module with TBS CRSF support
Removable battery
Supports Telemetry
Memory 16M (can be expanded by TF card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display

Basic Specifications:
Item Brand: Jumper
Item Model: Jumper T16 Plus
Size: 180*190*58
Weight: 798g
Voltage: DC7-8.4V
Battery: 2 x 18650 or 2S lipo (batteries not included)
Current: 350mah (NO CRSF)
Channel: 16CH

JP4-in-1 Specifications:
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.
Posted by myrcmodel | May 05, 2019 @ 01:58 AM | 1,165 Views
Foxeer BOX 2 4K HD Action Camera is in stock now!!!

https://www.rc-wing.com/foxeer-box-2...on-camera.html

Specifications:
Item Brand: Foxeer
Item Model: Foxeer BOX 2
Dimension: 40x40x40mm
Weight: 79g
Color: Black
Charging time: about 45 minutes
Lens: F2.8, FOVD 155°,7G Aspherical
Input: 5-10V
Super dual core CPU: [email protected][email protected],Dual core dual system
Sensor: SONY IMX377 1/2.3" Exmor-R CMOS, 12MP, 1.55um
Dsp: Advanced hisilicon 4K/30FPS
Waterproof Rate: IP64
Posted by myrcmodel | Apr 23, 2019 @ 04:33 AM | 1,878 Views
Just get the Jumper T16 in hand from https://www.rc-wing.com/jumper-t16-o...ansmitter.html.

Review will post later.

Basic Specifications:
Size: 180*190*58
Weight: 888g
Voltage: DC7-8.4V
Current: 350mah (NO CRSF)
Channel: 16ch

Main Features:
STM32F429BIT6 MCU
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Compatible with JumperTX and OpenTX firmware
Wheel menu button
Angle adjustable ultra-smooth dual bearing gimbals
Multi-protocol transmitter module with TBS CRSF support
Removable battery
Supports Telemetry
Memory 16M (can be expanded by TF card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display

JP4-in-1 Specifications:
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB....Continue Reading
Posted by myrcmodel | Dec 18, 2018 @ 12:07 AM | 5,486 Views
The Mobula 7 V2 comes with upgrade frame. With new material, it is ligher in weight and more durable in flight.What's more, it is more resistant to crash.

It is available at https://www.arrishobby.com/mobula7-v...v-racer-p-4182

Features:
New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
2S whoop more powerful and more flight time
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Smartaudio ready , change VTX bands, channels via OSD (
Adjust the settings and the PID of the flight controller via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Buzzer Ready
Posted by myrcmodel | Dec 10, 2018 @ 03:49 AM | 2,712 Views
ARRIS X280 280mm aims at long range and long flight time for drone fpv lovers. It is compatible with GoPro and sports camera on top. With the GPS, it can realize the one key return to home function. With 600w stock video transmitter, the transmission range can reach to 2km. With the Frsky R9M + R9MM receiver, the control range can reach to 10km.With 3s 5000mah lipo battery, the hovering time can reach to 24minutes.


Specifications:
Diagonal Wheelbase: 280mm
Flight Controller: F4 Pro V3 flight Controller
Motor: X2206 1500KV
ESC: BLHeli_S 30A
Frame Material: Pure Carbon Fiber
BNF weight: About 356g
Camera: Foxeer HS1177 V2 camera
FPV TX: 5.8G 48CH (0mw/25mw/100mw/200mw/400mw/600mw Switchable)
Antenna: 5.8G pagoda Antenna

For more information, you can check https://www.arrishobby.com/arris-x28...gps-bnf-p-4162
Posted by myrcmodel | Sep 15, 2017 @ 04:36 AM | 5,467 Views
TAROT GoPro 3DⅣ Metal Brushless Gimbal is specially designed for GoPro 5 on the basis of Tarot T-3D gimbal.It integrated all the high end technology of Tarot gimbal, it adopts CNC integral structure design,which brings the light weight gimbal and stable performance. With unique internal wiring design, built-in IMU gimbal control module, specialized servo drive module, this gimbal is able to support Pan Follow (PF) mode and First Person View (FPV) mode.This gimbal can work independently.

Main Features:
Specially designed for GoPro 5
Easy to install
High precision driving algorithm to control the motor precisely
Gimbal rotation speed is controllable
Gimbal support PF mode and FPV mode

Specifications:
Supported Camera:GOPRO Hero 5
Input Power: 3S-6S Li (11V-26V)
Working Current: 30mA(@25V)/50mA(@12V)
Stall Current: 350mA(@25V)/700mA(@12V)
Attitude Control Accuracy: +-0.02°
Max Controllable Rotation Speed:
TILT: +-200 deg/s
ROLL: +-200 deg/s
PAN: +-200 deg/s
Controllable Rotation Range:
TILT: -135°to +45°
ROLL: +-48°
PAN: +-330°
Support S-Bus/PPM/DSM receiver
Working Environment: -20℃~+50℃
Weight: 153g
Dimensions : 60mm*75mm*100mm
Assistant Software Supporting Platform: Windows XP; Windows VISTA; Windows 7;Windows 8(32 or 64 bit)

(Linked)

(Linked)
Posted by myrcmodel | Jul 21, 2017 @ 04:42 AM | 6,612 Views
ARRIS X-speed 180 rtf comes with the Emax RS2205 2600KV brusheless motor,ARRIS Raptor 30A ESC,4045 propeller,F4 flight controller and ARRIS XAT700M FPV mini camera and radiolink AT9 transmitter. It is fully assembled, tuned and tested before leaving the factory. Small Size, Light Weight,Strong Powerful,Fast Speed, this is ARRIS X-Speed 180 FPV Racing drone. If you pursuing a speedy and powerful fpv racer, this one is your best choice.

Unibody Design,Small Size and Light Weight

ARRIS X-Speed 180 adopts "unibody" design.The main unibody 3mm plate is CNC processed out of solid 3K carbon fiber sheet. The weight of the frame is kept low while the strength is kept high. The diagonal wheelbase of the ARRIS X-speed 180 is only 180mm, much smaller than the 250 or 280 racers.


...Continue Reading
Posted by myrcmodel | Jun 30, 2017 @ 03:04 AM | 7,276 Views
ARRIS X220 220mm FPV racig drone RTF is fully assemble and tuned, it is ready to fly. ARRIS X220 RTF comes with ARRIS X2205 2300kv high quality brushless motor,Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD board,5042 high efficiency propeller,5823S 5.8G 300mW 40CH mini video TX,Radiolink AT9 with R6DSM mini receiver and 4S 1500mah 50C lipo battery. Before leaving the factory, the RTF is tuned and tested by the technician.

The main feature of the ARRIS X220 is the "X" symmetrical design ,light weight, simple structure, durable and agile, great for freestyling.



Specifications:
Diagonal Wheelbase: 220mm
Flight Controller: F3 flight Controller
Frame Material: Pure Carbon Fiber
BNF weight:329.5g
Radio System: Radolink AT9 with Receier Camera: ARRIS XAT700M FPV camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: About 12 minutes (hovering)
Battery: ARRIS 4S 1500mah 50C Lipo



The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleek look.It comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is simple, it is easy to maintain.

...Continue Reading
Posted by myrcmodel | Jun 30, 2017 @ 03:03 AM | 6,951 Views
ARRIS X220 220mm FPV racig drone RTF is fully assemble and tuned, it is ready to fly. ARRIS X220 RTF comes with ARRIS X2205 2300kv high quality brushless motor,Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD board,5042 high efficiency propeller,5823S 5.8G 300mW 40CH mini video TX,Radiolink AT9 with R6DSM mini receiver and 4S 1500mah 50C lipo battery. Before leaving the factory, the RTF is tuned and tested by the technician.

The main feature of the ARRIS X220 is the "X" symmetrical design ,light weight, simple structure, durable and agile, great for freestyling.



Specifications:
Diagonal Wheelbase: 220mm
Flight Controller: F3 flight Controller
Frame Material: Pure Carbon Fiber
BNF weight:329.5g
Radio System: Radolink AT9 with Receier Camera: ARRIS XAT700M FPV camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: About 12 minutes (hovering)
Battery: ARRIS 4S 1500mah 50C Lipo



The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleek look.It comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is simple, it is easy to maintain.

...Continue Reading
Posted by myrcmodel | Jun 05, 2017 @ 09:22 PM | 7,444 Views
ARRIS X-Speed 280 V2 is the upgrade version of X-Speed 280.ARRIS X-Speed 280 V2 ARF is fully assembled and tested before leaving the factory. It comes with ARRIS S2205 2300KV,Flycolor Raptor 390 Tower w/ F390 30A 4 in 1 ESC + F3 + OSD,5042 high efficiency propeller, 700TVL HD camera, 5.8G 40CH video tx and antenna. You just need to install the receiver on it and do some settings, it will fly.



Specifications:
Motor: ARRIS S2205 2300KV Brushless Motor
ESC: Flycolor 30A BLheli-s 4 in 1 ESC
FC: F3
Propeller: ARRIS 5042 3 blade propeller
Video TX: ARRIS TS5823S 5.8G 40CH video tx
Antenna: Foxeer 50cm Circular Polarized Omni Antenna



This package includes :
1 X ARRIS X-SPEED 280 V2 Racing Drone Kit w/ Canopy
1 X Flycolor Raptor 390 Tower w/ F390 30A 4 in 1 ESC + F3 + OSD
4 X ARRIS S2205 2300KV Brushless Motor
4 X 5042 3-blade propellers
1 X Sony 700 line camera
1 X X-SPEED 280 Stickers
1 X ARRIS TS5832 5.8G 40CH video TX
1 X Foxeer 5.8g antenna
Posted by myrcmodel | May 09, 2017 @ 04:37 AM | 7,956 Views
Fatshark Attitude V4 FPV Goggle is available at Hobby-Wing.

Nice!!!!!!

Commemorate Fat Shark’s 10th year with the brand new AttitudeV4 Anniversary Edition headset, which combines a consumer-favorite 32°field of view (FOV), 4:3 VGA display and specialty pricing. This limited edition of red-trimmed goggles comes with a digital video recorder (DVR) and an included, 5.8G OLED receiver make to make the Attitude V4 a classic FPV headset. The included, simple-to-use receiver has one-touch band change capability, channel scanning and a spectrum analyzer for clean and simple channel selection.



...Continue Reading
Posted by myrcmodel | Jan 15, 2017 @ 10:20 PM | 11,327 Views
ARRIS C250 V2 is one more professional 250 fpv racing drone produced by ARRIS on the basis of the ARRIS C250. The same as the ARRIS C250, the C250 V2 has the advantage of simple structure and high strength. In the meanwhile, ARRIS C250 V2 adopts 4in1 30A tower for the first time, improve the performance of the drone much.




With the high performance ARRIS X2205 2300KV brushless motor, the ARIS C250 has outstanding power. ARRIS X2205 motor is one specially designed high end motor for professional fpv racing drones from ARRIS. From the choices of the magnet steel, wires, bearing and other materials to CNC processing and final test, ARRIS tried to take the best from the best in each step. In the end, the ARRIS X2205 motor has be great performance on power output, resist high temperature and working in sustaining large current condition.
...Continue Reading
Posted by myrcmodel | Dec 22, 2016 @ 10:16 PM | 9,580 Views


ARRIS C250 FPV Racing drone RTF is the latest 250 series FPV racer released by ARRIS. The ARRIS C250 RTF comes with arris 2205 brushless motor, ARRIS 20A ESC, 5045 3 blade propeller, 1000TVL camera, 5.8G 200mW video TX and antenna, ARRIS 4s 1500mah 50C battery and Charger. The ARRIS C250 RTF is fully assembled, tuned and tested before it left the factory. With the Eachine EV800 fpv goggle comes with it, you can fly in first person view.

Specifications:
Dimension:195mm x 230mm x 42mm (Propellers not included)
Diagonal Wheelbase: 250mm
Flight Controller: SP Racing F3 flight Controller
Frame Material: Pure Carbon fiber sheet
BNF weight:350g
Radio System: Flysky FSi6 Radio with Receiver
Camera: 1000TVL HD video canera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: 10min hovering
Battery: ARRIS 4S 1500mah 50C Lipo
Charger: ARRIS C4 1S to 4S Lipo Battery Charger
Goggle: Eachine EV800 FPV Goggle

For more information about the combo, Just click the picture.
Posted by myrcmodel | Nov 25, 2016 @ 01:33 AM | 9,164 Views
Posted by myrcmodel | Oct 27, 2016 @ 12:31 AM | 9,769 Views
The main feature of Tarot Peeper is long flight time. With the payload of GoPro 3 Axis gimbal, image transmission module and 6S 10000mah Lipo battery, the flight time can reach 47 minutes. And you can use bigger battery to get longer flight time. More Over,quick start, easy disassembly,convenient to carry and stable flight at high speed is its feature. The application aera include City Security,Highways,Fire Protection, searching in the forest, power line inspection and etc.

Specifications:
Digonal Wheelbase: 750mm
Frame Height: 258mm
Main Propeller Length: 210mm
Main propeller diameter: 440mm
Weight (without battery): about 1.28kg

More information about it, please click here
Posted by myrcmodel | Oct 24, 2016 @ 09:48 PM | 10,066 Views
Hobbywing XRotor Micro BLHeli-S 30A ESC is the latest BLHeli-S ESC released by hobbywing.This ESC is specially designed for competition FPV drones.Compared with the Xrotor BLHeli 30A, the BLHeli-s 30A is lighter, and it supports the DEO technology. Meanwhile, it supports oneshot125 mode, oneshot42 mode and multishot mode.

Main Features:
Super Small and Light
With the remarkably small size (23.8x14.5x5.8mm) and light weight (6g),XRotor Micro 30A BLHeli-S is an ESC specially designed for competition FPV drones.

Quality Components
The use of EMF8BB21F16G MCU (with the operating frequency of up to 48MHz),3-in-1 drive IC, American Fairchild MOSFETs, imported quality ceramic
capacitors, 3-ounce copper and 4 layers of PCBs guarantees less heat, higher efficiency and rapider response.

BLHeli-S Firmware Ready
The ESC supports the original BLHeli_S firmware. Users can flash or upgrade the firmware via the signal cable (on ESC) and program 4 ESCs simultaneously after connecting their flight controller to the BLHeliSuite software (if the flight controller uses the CleanFlight or betaflight firmware).

Hardware Generated PWM and Damped Light Mode
The ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative braking, causing very fast motor retardation, and it inherently also does active freewheeling.

Regular/Oneshot125/Oneshot42/Multishot Modes Supported
The ESC also supports Oneshot125(125-250¦Ěs)high-speed...Continue Reading
Posted by myrcmodel | Sep 17, 2016 @ 10:24 PM | 11,266 Views
Just received the Tarot GOPRO T-3D Ⅳ Metal 3 Axis Brushless Gimbal for GoPro 4 Session TL3T02 from hobby-wing.

Still waiting for the GoPro...
Posted by myrcmodel | Aug 22, 2016 @ 09:14 PM | 9,476 Views
X180 is the latest and smallest drone of ARRIS X-SPEED series,the wheelbase is 180mm.

Here is a video of it
ARRIS X180 Racing Drone FPV Flight (2 min 28 sec)


ARRIS X180 comes with X180 ARRIS 2205 2600kv brushless motor and ARRIS Falcon 30A ESC, so it has a perfectly performance. The BNF version without battery is only 305g. With powerful energy and light weight, you can do all the actions you want and with a longer flight time.
Discussion / Posted by myrcmodel / Nov 24, 2015 @ 09:12 PM / 11,170 Views / 0 Comments / Reply
This entry is temporarily hidden while myrcmodel edits it.