Posted by GRW3 | Nov 28, 2016 @ 09:51 PM | 7,603 Views
I used to have a little Dremel circular saw to use in my Dremel tool. I didn't use it much but for some jobs it was just perfect. I also recognized it had the potential to be very dangerous. It was kept with my most important attachments.

One day I came home from work and went in my shop. I notice there is a tin can in the vice. The tin can has various cuts and peeled back panels. Next to it, on the bench, was my Dremel tool and my once precious saw. Now it was in sad, sad shape. It was warped and blued from overheating. A lot of the teeth were missing. I knew one of our pre teen Irish twin boys had done it but there was no resolving who. (Frankly, considering our history, I was just glad I wasn't at the emergency room - again.)

So I thought to replace it - wrong. No longer available. I guess experience proved my assessment of danger to Dremel and they discontinued it. I kept an eye out for a replacement in every Dremel display I came across, to no avail. I did finally find a replacement saw from another company. It's actually a better design. I don't remember where I got it for sure. I put it away in a drawer of my small parts cabinet and I included the product description sheet that came with it. Tells me everything about the product except who made it. I'm thinking I got it at the local Woodcrafters store.

The search occurred before internet, eBay and Amazon. That's right - manual. I only use it on a blue moon for very specific jobs, so I haven't looked lately.

Update: I just read some earlier entries in my blog and I found out I bought it at the '06 Toledo R/C Show. No hint of the vendor.
Posted by IronRotor | Nov 28, 2016 @ 09:19 PM | 4,392 Views
Had an urge for an EDF for some winter thrashing, 14 Blade, 8" thrust tube, 2900kv, 4s, afterburner LED and modified for twin rudder. Surprisingly light, hope to Maiden this weekend.
Posted by Gensace - agnes | Nov 28, 2016 @ 08:14 PM | 2,227 Views
Prize Draw 26th 27th - Black Friday sale from Gensace and Tattu (1 min 35 sec)


Nov 26th and 27th's winners have revealed .I will not spoil it,check to find out yourself,if you have ordered,it could be you(1/25)

And happy Cyber Monday everyone.1 day and 5 hours left for the winning chance.

Not just the low price,but time to win it for free

http://www.genstattu.com/blackfriday
Posted by david.gyori | Nov 28, 2016 @ 07:01 PM | 1,918 Views
Hey Guys,

I would like to notice you, that DJI Sales Event now is getting closer to the finish line, you have to be fast if you would like to save some money. You can get up to 50% discount of your order, if you buy in the Official DJI Store.

You can find the promotions here.

DJI Sales Event 2016

Here are some good deals!



If you want to buy something, do it now, because as I know this is the biggest shopping event on DJI Store in 2016!

Have a nice day,

David
Posted by Appelmoesman | Nov 28, 2016 @ 03:59 PM | 9,470 Views
http://fpv.tv/custom-pids-for-realacc-x210/

Name: Schermafdruk 2016-11-28 13.59.57.png
Views: 1544
Size: 196.1 KB
Description:

Custom pid settings that reduce prop wash and improve the handling of the quadcopter.
Your flight will be much smoother.

Name: Schermafdruk 2016-11-28 14.01.05.png
Views: 732
Size: 178.1 KB
Description:

-Works with Dshot,
-Works with Multishot,
-Takes in account 60 gram gopro camera,
-makes flips and tricks very controllable.

Ripping new location with a Quadcopter BASS BOOSTED (3 min 1 sec)


Camera Firefly 7S
goo.gl/enGq4L

...Continue Reading
Posted by JohnVH | Nov 28, 2016 @ 01:38 PM | 2,743 Views
Posted by theimacman | Nov 28, 2016 @ 12:21 PM | 11,718 Views
My first time doing big jumps, and boy was it fun!

VKAR Racing - Bison Extreme - Big Jumps! (6 min 56 sec)

Posted by theimacman | Nov 28, 2016 @ 11:01 AM | 16,501 Views
Cool design, but not a great flyer.

Sharper Image - DX-1 Micro Drone - Review and Flight (13 min 35 sec)

Posted by MaydayOne | Nov 28, 2016 @ 10:15 AM | 5,088 Views
A friend asked me to build for him an ASW28 fully fpv equiped as mine....
V1 is def out so far....So we decided to do with V2.

The wing clips are really nice compared to V1 wing joiner...
Unfortunately, the wheel had to be removed for battery purpose (4000mah 4s 10c)
Posted by MaydayOne | Nov 28, 2016 @ 09:51 AM | 3,314 Views
A friend didn't really like his LD 3XL V3 and gifted it to me.
It's 3.6m wingspan
ESC : Dlux 100A
Battery : 5000mAH 4s 20c
Motor Dymond : not sure about the model so far
In the nose : 420g of screws as ballast

I tried it as he buit it and it feels really tail heavy.
My goal : Equip this bird with FPV gear and balance it correctly

If anyone has done yet, I'd be happy to share !
Posted by JSS4 | Nov 28, 2016 @ 08:06 AM | 6,569 Views
From July in Ottawa i filmed while my brother drove
Proboat Formula FASTech (1 min 45 sec)

Posted by aben71 | Nov 28, 2016 @ 06:57 AM | 3,103 Views
Ah yes it is that time again, CYBER MONDAY

Banggood is in on the action with a promotion going on now,here is a link to check out some sweet deals worth checking out


http://deals.banggood.com/deals/edm/...ampaign=aben71

Edit. Cyber Monday is past but the countdown till Christmas us still on !!
Posted by www.fpvmodel.com | Nov 28, 2016 @ 05:34 AM | 3,175 Views
Zmr210R track practice (2 min 8 sec)


ZMR210R Track Pratice by Ka Kei Leung

Frame: ZMR210R
http://www.fpvmodel.com/zmr210r-210m...ard_g1220.html
FC: X-Racer F303
http://www.fpvmodel.com/x-racer-f303...ler_g1106.html
ESC: Flycolor 30A BLs
Motor: EVO 2205
Prop: Gemfan 5045 MASTER PROPS--Fura Fluo Yellow
Cam: Runcam swift
http://www.fpvmodel.com/runcam-swift...ens_g1216.html
Vtx: Unify pro 5.8G
BF 3.0
Gopro session 5
Posted by AGACherry | Nov 28, 2016 @ 01:43 AM | 3,143 Views
AGAPOWER
Capacity: 4500
Voltage: 14.8
T ±5% mm: 26.0
W ±5% mm: 49.0
L ±5% mm: 155.0
Weight: 405.5
Continuous: 25C(112.5A)
Burst: 50C(225A)
Features:
1. Adopted the world's key material-LiCo02
2. Used fully automatic lamination machine with Nano Tech
​3. Laminated structure, Nano Coat Technology. Advanced Nano ultrasonic welding electrode.
Posted by VicT | Nov 27, 2016 @ 11:51 PM | 5,864 Views
I used the same aftermarket gear used on my Apprentice and plugged it into the slot used for the front float gear. I used a Dremmel tool the width of the slot to remove the plastic blocking the metal gear. Once all the plastic is routed out the gear is pushed in as far as it can go and it's almost flush with the plastic belly. Washers and screws or plastic retaining straps secure and lock the gear in place.

The angle of the wheel pants are about 20 degrees up too far from the fuselage centerline and must be twisted in a vice with vicegrips to make it look good.

The Timber sits lower and the axle are more forward so tip overs are no problem anymore. There is less prop clearance and this may be an issue if you are cutting grass on takeoff and landings. The Timber is lighter and more streamlined so top end speed and glide has increased especially if you can brake the prop. I tried programming the stock ESC for brake but could not get into the program even with a non SAFE Spektrum receiver. I intend to swap it out for a 60 amp ESC that works good on my Apprentice....Continue Reading
Posted by Blind Accidents | Nov 27, 2016 @ 10:14 PM | 3,777 Views
Food for thought on making a mini power distribution board for a few cents a piece. 3/4" Copper pipe clamps, <$2.5 per 5 pack.

- Flatten the clamp, I did it by hand and tried my luck with the vice.
- Measure halfway and cut the clamp in half.
- Added electrical tape to bind the two halves together. A small piece of silicon wire is used as a spacer and insulator.
- Once the soldering is done then more tape will be added.

Total weight, 7.2 grams
Trimmed mine to about 5 grams

Remember to use steel wool or some abbrasive to clean the copper surface before soldering. I will be adding a regulator and capacitor to mine aswell to have the full function of a traditional PDB.
Posted by kwasch | Nov 27, 2016 @ 10:00 PM | 6,666 Views
All my flying buddies were busy today, so I decided to drive around and look for new flying spots. Found one that might be kinda cool.

DirtyWaschFPV / Flight VLOG #2 / New Spot (4 min 19 sec)