nagas's blog View Details
Posted by nagas | Sep 08, 2021 @ 06:43 PM | 15,737 Views
This site was made for my buddy RickP for the demo flights of his Virgin Galactic Space Ship 2, White Knight 2 and combination of both.

Here is a video of Rick flying his Virgin Galactica Space Ship 2 at the site:

Virgin Galactic SS2 Flight (0 min 59 sec)

Links to the Virgin Galactic Craft:

Space Ship 2

White Knight 2

White Knight 2 and Space Ship 2

Posted by nagas | Sep 02, 2021 @ 10:33 AM | 26,002 Views
Flying Teapot is the third studio album by the progressive rock band Gong, originally released by Virgin Records in May 1973.It was re-issued later in the year with different cover art by BYG Actuel in France and Japan.

That cover art was used as the texture for the model.

A challenge set by my buddy John although he meant a real model!

You can download the model here.

Gong's Flying Teapot (0 min 52 sec)

Posted by nagas | Aug 24, 2021 @ 08:14 AM | 15,878 Views
Asboth AH Helicopter (1 min 6 sec)

Following the work of Petróczy, Karman and Žurovec (PKZ) around the time of WWI, Hungarian engineer Oszkár von Asboth who had worked on both of the PKZ helicopters and who was a specialist in propeller design and manufacture started to develop the concept and designed and flew four different helicopter between 1928 and 1931.

As with the PKZ series, two counter rotating coaxial rotors were employed which were capable of providing sufficient lift. However, just like the PKZ aircraft, his were also inherently unstable and need to be tethered. Over 250 flights were made, some of which lasted for up to an hour. The helicopters were capable of climbing to an altitude of 30m. The problem of providing forward thrust was addressed with the addition of a forward facing propeller in later versions as with typical fixed wing aircraft.

Looking closely at the few photographs that are available, the two central, lateral panels appear to be articulated with control horns and wires attached. This may have been an attempt to deflect the main rotor down wash to one side or the other to provide some degree of control although it seems to have been ineffective. The front and rear panels were also probably similarly hinged although that is not apparent in the available pictures.

The problems of providing directional control and forward thrust were not solved until the genius Igor Sikorsky invented both collective and cyclic pitch mechanisms...Continue Reading
Posted by nagas | Aug 04, 2021 @ 08:45 AM | 33,752 Views
Lego 42092 Rescue Helicopter with upgraded Blade 130s mechanism.

Upgrades include Rakon Heli Carbon Fibre frame, 180 Trio Three-Blade Head, alloy tail boom, alloy tail motor mount and alloy tail blade fittings.

A breezy day so altitude holding was a little problematic at times hence the bumpy landing.

Lego 42092 Rescue Helicopter (0 min 55 sec)

Not much in the way of modifications need to fit the 130s inside. I cut a carbon fibre plate and after drilling holes to bolt the plate to the Lego kit I then found I could attach the 130s Rakon frame to it! Doh!

So in the end I went with hot glue. It holds well so far and if needed I can free it up with a little isopropyl.
Posted by nagas | Jun 26, 2021 @ 02:26 PM | 21,049 Views
Four launch positions are available; two for fixed wing including Parked and Catapult, one for helicopters and one for amphibious aircraft.

Original Panorama by Jurgen Schrader.

Original Flying Site for Phoenix by Ezekial/Freshman IGN

Panorama Modified and completely new Flying Site created by Naga


USS Hornet at Sea (2 min 21 sec)

Posted by nagas | Jun 18, 2021 @ 01:44 PM | 14,538 Views
A new flying site for Phoenix Flight Sim.

A grassy field with WW-1 vintage aircraft and observation balloons suitable for aircraft of the period.

In the skys, a Sopwith attacks the Bloody Red baron in his Fokker DR1 who gets it!

A Fokker DVII and Eindecker III are among my favourite aircraft....Continue Reading
Posted by nagas | Jun 09, 2021 @ 04:41 AM | 18,139 Views
Petróczy, Karman and Žurovec (PKZ)

In 1916, István Petróczy proposed an electrically driven rotorcraft to replace the dangerously flammable observation balloon. His original concept was for the onboard electric motor to be supplied by a dynamo driven by an internal combustion engine.

Video Flight demonstration

PKZ-2 WWWI helicopter for Phoenix Flight Sim. (0 min 59 sec)


The PKZ-1 was designed by Karman and Žurovec. It had four radiating arms with four-bladed propeller on top of each, geared in pairs such that each pair spun in the opposite direction just like a modern Quadcopter.

The rotors were driven from a single centrally located electric motor. A ground-based generator fed power through the tethering cables to the motor. In a short series of four test flights in March 1918 the craft was able to lift three men. The wiring insulation in the motor burned out on the fourth flight and was not repaired.


The PKZ-2 was developed by Žurovec in parallel with the PKZ-1, but wholly independently. Zurovec only acknowledged the support of Petróczy.

It had three radiating arms, each housing a rotary piston engine. These engines were coupled together to drive a central pair of contra-rotating wooden propellers mounted above the airframe. A round cockpit for the aircrew was fixed centrally, on top of the rotor mast. Landing gear consisted of rubber-fabric cushions, one large central one and three smaller ones at the end of each arm.

The...Continue Reading
Posted by nagas | Jun 06, 2021 @ 12:17 PM | 27,946 Views
The Sikorsky S-58 is a piston engine helicopter developed from the earlier S-55 as an anti-submarine warfare and general utility and transport vehicle for the US Navy. It first flew in March 1954.

It was given the military designation by the US Navy as HSS-1 Seabat in the ASW configuration, HUS-1 Seahorse in the utility configuration and H-34 Choctaw when later adopted by the US Army.

In 1956 one was sent to the UK to serve as a pattern where it was developed further by Westland Helicopters as the Westland Wessex for the British Royal Navy Fleet Air Arm and later the Royal Airforce. It was fitted with a Napier Gazelle turboshaft engine overcoming the piston engine limitations and also with an automatic pilot system and used for ASW, Utility and SAR roles. Sikorsky subsequently developed a turbine version themselves, the S-58T.

Phoenix S-58 Models

Four versions of the model are available for download:

Mercury Capsule Freedom 7 and astronaut Alan Shepard Recovery, 5th May 1961 by US Marines HSS-262 helicopter #44 with piston engine flying from the USS Lake Champlain (CV-39).

Westland Wessex Royal Navy 737 Naval Air Squadron fitted with jet turbine engine. 

US Navy Air Development Squadron VX-6 "Puckered Penguins" supporting the US Antarctic Program Operation Deep Freeze at McMurdo Station Antarctica with piston engine.

US Army Crash Reaction Aircraft.

In total, ten liveries are available for download reflecting the various roles for the S-...Continue Reading
Posted by nagas | May 30, 2021 @ 04:37 PM | 27,269 Views
Made using Lego's software by aelfyer's very smart son. It will soon be time for him to make the models for Phoenix himself!

You can download the model here:

Demonstration flight in "Lego Land" by Naga:

Lego Apache at Lego Land (0 min 59 sec)

Posted by nagas | Apr 19, 2021 @ 10:12 AM | 4,630 Views
Monday 19th April 2021 flight history was made! The first aircaft to fly off world!

Ingenuity coaxial helicopter succeded with its maiden flight after days of delay while new flight software was tested and uploaded.

Here to celebrate is Perseverance at Jesero Crater, Mars flying site for PhoenixRC Simulator.

Made from the 360 deg panorama taken by Perceverance on 20th February 2012 while it waited for Ingenuity to fulfill her destiny.


While visiting the Jesero Crater in my Occulus Quest Virtual Reality Headset (an amazing experience!) I realised that the flying site has considerable distortion with a goldfish bowl effect causing the horizon to be too high.

I have consequently rebuilt the site to make it more realistic.

I strongly suggest you download and use Jesero Crater Mars v2 instead, a more realistic rendering.

You can download my model of Ingenuity to fly at this site here.

Video of Ingenuity at Jesero Crater

Ingenuity at Jesero Crater for Phoenix Flight Sim. (1 min 10 sec)

Posted by nagas | Apr 11, 2021 @ 12:14 PM | 5,579 Views
Ingenuity Coaxial Helicopter

Most RC pilots, especially us chopper heads will be aware that taken along with the Perceverance Mars Rover, the first extraplanetary RC aircraft is due to make its maiden flight today 11th April 2021, the incredible Ingenuity coaxial helicopter. History in the making!

Ingenuity's design has clearly been influenced and much of it derived from the recent advances in RC helicopters, including flybarless, electronically stabilised flight control mechanisms as well as various components that can be bought off the shelf. Surprisingly, many of the componets in Ingenuity have been purchased by NASA, and can be found in other applications such as our mobile phones.

Ingenuity has a rotor diameter of 1.2m, a height of 0.49m and a total mass (not its weight on Mars!) of 1.8Kg with 350 Watts power available for a 90s flight.

The Phoenix Model and further details can be downloaded here:

Demonstration Video

Ingenuity flying at Jesero Crater. You can download the flying site here.

Ingenuity at Jesero Crater for Phoenix Flight Sim. (1 min 10 sec)

Posted by nagas | Mar 29, 2021 @ 01:50 PM | 7,808 Views
Pachisi Court located at Fatehpur Sikri near Agra in India holds very fond memories for me.

I visited as a seventeen year old young and idealistic hippy back in 1973. I remember sneaking in late at night during a full moon when it was officially closed until morning and having the whole place to myself, a mystical experience. Good job the guards didn't spot me!

Since that was nearly 50 years ago, I am planning to go back to India in 2023 if the Covid crisis is over and I am able too.

This is a work in progress and still needs some tidying up. As yet there are no collision surfaces.

It may get updated but in the mean time is posted "as is".

Hal Dhruv Sarang Display Team (1 min 15 sec)

Posted by nagas | Mar 29, 2021 @ 07:00 AM | 7,541 Views
The HAL Dhruv is a utility helicopter designed and developed by Hindustan Aeronautics Limited (HAL) from India. It has been named after an Indian mythological character, Dhruv, which in Sanskrit means 'unshakeable'.

The development of the Dhruv was announced in November 1984, and it was subsequently designed with assistance from Germany's Messerschmitt-Bölkow-Blohm (MBB) as a consultant and collaborative partner on the programme.

The helicopter first flew in 1992 and entered service in 2002. It is designed to meet the requirement of both military and civil operators, with military variants of the helicopter being developed for the Indian Armed Forces, while a variant for civilian/commercial use has also been developed. Military versions in production include transport, utility, reconnaissance and medical evacuation variants. Based on the Dhruv platform, the HAL Light Combat Helicopter (LCH) a dedicated attack helicopter and HAL Light Utility Helicopter (LUH), a utility and observation helicopter, are currently being developed.

As of October 2020, more than 300 HAL Dhruv have been produced for domestic and export markets. (Wikipedia)

Sarang ('Peacock') is the helicopter air display team of the Indian Air Force that flies four modified HAL Dhruv helicopters, also known as Advanced Light Helicopter (ALH). The team was formed in October 2003 and their first performance was at the Asian Aerospace show, Singapore, in 2004. The name Sarang is symbolic; the peacock is...Continue Reading
Posted by nagas | Sep 02, 2020 @ 02:03 PM | 7,749 Views
I made a new flying site Clouds & Stars for the new Phoenix Model Albatross.

You can download the model of the Albatross here. Flying site can be downloaded below.

Video inspired by Poppy. Clearly a great artist, her work on her Flicker site is stunning.

Clouds and Stars

Clouds and Stars (0 min 53 sec)

Posted by nagas | Sep 02, 2020 @ 01:54 PM | 7,627 Views
RickP handed over a great Blender model and allowed me the pleasure of detailing and texturing her as well as getting her to fly.

The bomb bay and rocket bay doors open with the Gear channel.

Sound files are also available for the model and are included in the download.

You can download her here.

Texture modified from a picture by Poppy. Clearly a great artist. her work on her Flicker site is stunning.

I made new flying sites for the model, you can download Clouds & Stars here.

Video inspired by Poppy.

Backgound music by Les Baxter - Master of the World (1961)

Albatross (1 min 45 sec)

Posted by nagas | Aug 06, 2020 @ 12:41 PM | 8,598 Views
Oh no! Another flying Pig!

Having recently purchased a Spektrum iX12 Tx I was intrigued with the possibilities of Sequencers, especially those that self cycle repeatedly causing an outcome such as flashing a light or moving a widget.

For a long time I have wanted to make model ornithopters for Phoenix, but how to make the wings flap? I could put them on one of the normal control channels so they move with the ailerons or elevator for example, as I do to animate my pilots but that is not very satisfactory for wings. Then I realised I could use a Cyclic Sequencer to drive the flapping motion!

At that point I was looking for an ornithopter to experiment with and I suddenly realised we already have one; Miss Piggy!

Previously I could make her flap her wings and run by moving the aileron and elevator rhythmically during take off. Now I could drive those motions with a Cyclic Sequencer. How cool is that?

To make this version of Miss Piggy flap her wings and run autonomously, the movements are not intrinsic to Phoenix but are driven by the Spektrum sequencer.

Pigasus originally made by Rick. Much help from both Aelflyer and Rick to implement the ornithopter concept.

You can download the model here.

Pigasus (1 min 3 sec)

Posted by nagas | Jun 24, 2020 @ 08:25 AM | 8,559 Views
The Kamov Ka-50 "Black Shark" (Russian: Чёрная акула, NATO reporting name: Hokum A) is a Russian single-seat attack helicopter with the distinctive coaxial rotor system of the Kamov design bureau.

It was designed in the 1980s and adopted for service in the Russian army in 1995. It is manufactured by the Progress company in Arsenyev. It is used as a heavily armed scout helicopter. It is the world's first operational helicopter with a rescue ejection system. (Wikipedia)

Nine different colour schemes are included as shown below.

Model originally by helijah.

You can download here:...Continue Reading
Posted by nagas | Jun 02, 2020 @ 03:53 AM | 12,373 Views
The Coandă-1910, designed by Romanian inventor Henri Coandă was an unconventional aircraft powered by a 50 hp inline water-cooled Clerget internal combustion engine driving a ducted fan through a 1:4 gearbox which turned the 50cm compressor at 4,000 rpm. Coandă called it a "turbo-propulseur".

The exhaust from the piston engine was additionally vented into the duct via heat exchangers in contact with the central air flow to add heat and mass. Aviation reporters from The Aero and La Technique Aeronautique at that time were doubtful that the engine could provide sufficient thrust for flight.

The unusual aircraft attracted attention at the Second International Aeronautical Exhibition in Paris in October 1910, being the only exhibit without a propeller.

It is doubtful that the aircraft ever actually flew and is mired in controversy.

However, Coandă claims the aircraft did achieve a single short flight while ground testing the engine at Issy-les-Moulineaux, outside Paris in 1910, the powerplant forcing the plane airborne for a short time. As Coandă himself was not a pilot, he quickly lost control of the aircraft and crashed it to the ground throwing him clear of the burning wreckage with some slight injuries.

Despite the loss of the machine, Coandă noted how the expelled gases seemed to conform to the sides of his aircraft as it burned. This observation would lead Coandă to research the phenomenon culminating as the &...Continue Reading
Posted by nagas | Dec 08, 2019 @ 04:48 AM | 9,881 Views
After the successful Phoenix CH-53 Stallion models, Rick was looking for the next copter to make and so I suggested the Sikorsky S-97 Raider. While Rick developed the model in Blender, I was working on the flight capabilities in Builder so a great collaboration. It has been a pleasure, thanks for the honour of working with you Rick and of posting the finished models.

Phoenix Models

Three versions are available for download here:

1) Sikorsky Raider Prototype P1 with side mounted gun pod and rockets.

2) Canadian Search and Rescue (SAR) with drop tanks.

3) Indian Air Force Sarang Demonstration Team.

The Sikorsky S-97 Raider is a high-speed scout and attack compound helicopter (main rotors and pusher prop) with a coaxial rotor system under development by Sikorsky Aircraft. Sikorsky planned to offer it for the United States Army's Armed Aerial Scout program, along with other possible uses including civilian applications such as Search and Rescue.

The S-97 made its maiden flight on 22 May 2015 and is a continuation of the experimental coaxial S-69 from the 1970s and the more recent X2 technology demonstrator of 2010. Construction of two prototypes began in October 2012, the first prototype (P1) was revealed in 2014 and has been used for flight testing while the second (P2) is for use as a demonstrator. The S-97 Raider is wholly funded by private investment with Sikorsky providing 75 percent of the costs and 53 principal suppliers providing the rest.

...Continue Reading
Posted by nagas | Oct 08, 2019 @ 03:20 AM | 7,284 Views
The Eurocopter EC655 Tiger is a four-bladed, twin-engine, stealthed multirole attack helicopter which first entered service in 2003.

It is currently flown by Germany, France, Spain and Australia.

The Phoenix model is derived from the work of Helijah and is available in four colour schemes for each of those countries.

You can download the model here.