Posted by Helen_AGFrc | Today @ 01:02 AM | 134 Views
Here comes the little cuttie purple CNC servo for the Mini Z Car.
It has the JST and JR connector for your preferences, and it has 1.4KG torque & 0.065s.
We also have the receiver and car gyro to use with the servo, and it is the easy combo for your build.

A11CLS is the Special Designed for Mini Z car, and it has below features and specs:


High performance Mini-Z digital servo

High precision titanium gear

High quality coreless motor

Full CNC Aluminium housing and structure

Waterproof IP65

Ideal for Mini-Z Cars



Operating Voltage: 4.8-6.0V

Operating speed: 0.075sec/60°@4.8V

Operating speed: 0.065sec/60°@6.0V

Stall Torque: 1.2 kg-cm (16.66 oz-in) @4.8V

Stall Torque: 1.4 kg-cm (19.44 oz-in) @6.0V

Gear: Titanium

Motor: Coreless

Size: 20*21*11.3mm (0.78 x 0.82 x 0.44 in)

Weight: 11g

Connector Wire: JR or JST1.5 for selection

For more info, please feel free to contact me at [email protected]
Posted by old4570 | Yesterday @ 09:44 PM | 1,230 Views
My 3D printer has been idle for some time so I thought it was time to do that 3D printed plane thing .
Problem is , finding something that I want to print . Is going to be small and light enough to play with .
And no such animal exists !

I downloaded a lot of planes off Thingiverse , but most are incomplete . ( Not ready to print ) = This is the one I am printing out !
Completed fuse 01 last night , and am doing fuse 02 now . ( 74% complete )

Will see ...

Wingspan: 720 mm (920 mm when using Big Wing version)
Length: 578 mm
Est. weight: 450 g ( A little Porky Pig ) and is that flying weight or prinTED weight ?
CG: 26 mm
Posted by LYD0373 | Yesterday @ 09:37 PM | 1,232 Views
Wanted Spektrum DX20 in excellent condition with accessories, case, etc. $1000.
Posted by jmxp69 | Yesterday @ 09:32 PM | 1,226 Views
PA Katana MX Build/Assembly review:

PA Katana MX Build Review - Precision Aerobatics (7 min 23 sec)

Posted by Kmot | Yesterday @ 03:54 PM | 2,157 Views
Plane is all ready to go now. I plan to fly the maiden this coming week. ...Continue Reading
Posted by jfmusic | Yesterday @ 01:45 PM | 2,188 Views
HI All,

After hours spent over my work bench, doing builds, I have suffered for years.
I don’t know if you suffer from back pain or not.
But I just released a book on DIY back pain relief.

I’m trying to get the word out about the book.
It's my way of giving back to the communities that have supported
my hobby addictions for years.

I know there are lot of people who have suffered like I did.
It could really help them, as the techniques did for me.

Please, if you could share with your email lists.

I would really appreciate it.

This is my first book, being released through Smashwords. On the Summer sale at 50% off,
if you have back pain or know someone who does, please grab a copy. “Back Pain, DIY Pain Relief”

I found ways to mitigate my pain, and am sharing what I found that works.

Be Safe

Posted by Thomas B. | Yesterday @ 01:24 PM | 2,181 Views
Posted by DutchRC | Yesterday @ 11:06 AM | 2,396 Views
Halloa people

I've said so in a couple of video's already but I've been wanting to do a build with a RacerX frame for quite a while! And here is the project-intro for it
Ofcourse the series will be a multi-part series. In today's video I give a general overview of the parts and why I chose those

Hyper Light 5" Project! The ET5 - Project Intro :) (10 min 53 sec)

The parts list:

Frame: Racer X ET5 Ultra light frame kit

FC / ESC: Diatone Mamba F411 25A AIO

Motors: Karearea 1507 3100 KV

FPV Camera: Runcam Phoenix 2

VTX: BetaFPV M02 25-350mW

Propellers: Gemfan SL 5125

Receiver: Frsky XM+

Lipo: Tattu R-Line 850mah 4S
Posted by Gnat666 | Yesterday @ 04:48 AM | 3,267 Views
Catch up time ...
Some of my Aircraft and Flights, most nicely captured by Waz at
Thanks mate!

RC 3d-printed P-39 Airacobra second build maiden flight uncut (4 min 23 sec)

Freewing Focke-Wulf Fw190 successful maiden flight (2 min 36 sec)
...Continue Reading
Posted by JeffMac | Jul 04, 2020 @ 06:10 PM | 4,706 Views
All -

The link is to the running 1947 Maytag twin cylinder engine . Maytag was from Newton Iowa USA. The twin cylinder engine superceded the single cylinder engines and was the last engine Maytag produced. 1937-1952. My engine was sold to a lawn mower company with conversion parts from Leclaire Mfg co. I bought this engine in 1987, and restored it ~ 20 years ago.

Best regards,

Posted by jetpilotrich | Jul 04, 2020 @ 04:57 PM | 4,882 Views
Its a great opportunity to get the E-flite Phantom at a great price!

**** SPECIAL PRICE OF 15% OFF from July 1st thru 31st at Horizon*****
Get Your E-flite F-4 PHANTOM II BNF Basic with AS3X and SAFE Select here►
Use Coupon CODE► SOFO2020 at checkout!
Posted by Aostol | Jul 04, 2020 @ 03:52 PM | 4,986 Views
Hi Im new hear but I whant to cher my project
Posted by nsg | Jul 04, 2020 @ 12:10 PM | 5,288 Views
EF Laser 60"
MotrolFly 4315 custom wound to 370 kV
Castle HV60
2x4s2600 mah
servo battery 2s800, regulated via Castle BEC

Approximately 1700 wt top, settles at 1500-1600

3DHS original Slick 70
Hyperon Z4035-299, 299 kV
Castle ICE 100
Xoar 18x10
Life 2s800 mah direct

Approximately 2kwt top

3DHS original Velox 68" (todo)
Hyperion ZS

3DHS Vyper 65" (todo)
MotrolFly 4315-300
Posted by YO_VLOGS | Jul 04, 2020 @ 11:43 AM | 5,295 Views
HSP Nitro 2 speed Runaway and Crash (9 min 7 sec)

this happens to me last weekend due to loose AA-size battery box avoid aa batteries and start using lipo battery for the nitro
Posted by GroundControlRC | Jul 04, 2020 @ 11:04 AM | 5,444 Views

Eachine Mini Mustang P51D Warbird RTF w/Gyro - Wind Surfing Session #3 - Wind 20.3mph (32.7kph) Oh Yeah!

Eachine Mini Mustang P51D Warbird RTF P51 P-51

Banggood GCRC

Here is a link to the Video:

I wanted to test this Mini P51D is as similar wind as I had testing the Volantex Sport Cub 500.
The Wind did not disappoint ;-)
Hang On! Launching ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Eachine Mini Mustang P51D Warbird RTF P51 P-51

Here is a link to the Playlist for the Eachine Mini P51D Mustang:

Spare Parts:

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane

Eachine 3.7V 380mah 25C Lipo **I use these in the Eachine Mini P51D Mustang with no problem

JJRC H31 RC Quadcopter Spare Parts Battery 3.7V 400mah

JJRC H31 RC Quadcopter Spare Parts 6Pcs 3.7V 400MAH 30C Battery and Charger Set X6A-A13

5PCS 3.7V 300mAh Lipo Battery Set for H8 H22 Eachine H8 Mini RC Quadcopter
...Continue Reading