Posted by alex_nikiforov | Yesterday @ 11:08 PM | 975 Views
Foxeer Razer Nano 1200TVL 1/3 CMOS Low Latency FPV Camera 4:3/16:9 PAL/NTSC Optional For RC Racer Drone

Foxeer Razer Nano. Бюджетная нано камера за $17.99 (4 min 55 sec)

Link: Foxeer Razer Nano
Posted by simages | Yesterday @ 09:51 PM | 1,143 Views
This has been way over due for me.......

Have always planned to finish this into a NASA Cobra AH-1G. I'm sure it will take a little time.....

Build Thread HERE
Posted by old4570 | Yesterday @ 09:32 PM | 1,100 Views

Took my FMS 800 V-tail out for a spin .
Just recently flashed OpenTx 2.3.7 , so looks like trims were a little . Or maybe it was that last time I flew the V-tail it was windy ?
Either way ..

Elevator a little touchy , Ailerons a little soft ..
Still , I really like this one . I should fly it more .

Ezio 800 prop VS HK folding prop (2 min 1 sec)

I am running a HK folding prop on mine ..
Posted by BDOG1 | Yesterday @ 04:31 PM | 1,613 Views
I got a chance to duck out and do some sloping today.
The forecast only called for a 1 hr window of the correct direction wind,I have wanted to get out with my 3m Crystal to see if she flew as well on the slope as she had for her maiden "flat land " outing .
Please see below :
Posted by J Morgan | Yesterday @ 04:27 PM | 1,634 Views
While I am attempting to sharpen up my old rusty piloting skills in order to maiden the SE-5a and Fokker DVIII, moving on with a larger build
of the Vindicator.
This will be a very light weight build hopefully. Details in the build log here:

Posted by jmxp69 | Yesterday @ 03:07 PM | 1,949 Views
This is the first look at the ToolkitRC WM150 Watt Meter
ToolkitRC WM150 Watt Meter First Look (9 min 42 sec)

Posted by FR4-Pilot | Yesterday @ 02:54 PM | 1,983 Views
After a few years of learning with Proto-X quads, Eachine FatBees and E-Flite Inductrixes (original, Plus and brushless), I decided to give this guy a try:

It's been years since I messed with CleanFlight, now it's BetaFlight, so here we go ...
Posted by Kmurphy1 | Yesterday @ 02:16 AM | 3,322 Views
Saw this video. Want to know what sound card hes running off of. Thanks

Upgrade smoke Taigen Tiger 1 Tank (2 min 43 sec)

Posted by newelectro | Jun 02, 2020 @ 06:30 PM | 4,623 Views
Durafly T-28 Trojan
Durafly T-28 Trojan (6 min 25 sec)

Posted by newelectro | Jun 02, 2020 @ 05:23 PM | 4,765 Views
Roc Hobby Vtail
Roc Hobby Vtail (2 min 18 sec)

Posted by Spit100 | Jun 02, 2020 @ 11:51 AM | 5,574 Views
Because of the COVID confinement, this was a complicated and pretty quick build. Very happy with how it turned out and flies.

Southfacing got some great flight video too, flying like a DR1.

My build thread is in progress here:

Now to finish the 1922 Barling bomber.


Zeppelin DSCN5452 (1 min 20 sec)

Posted by GroundControlRC | Jun 02, 2020 @ 08:57 AM | 5,833 Views

Test Flights 19 & 20 Volantex 768-1 P51D Mustang 750mm Warbird PNF - It seems to handle the Wind very well!

Volantex P51D Mustang 750mm Wingspan PNF

Volantex P51D Mustang 750mm Wingspan RTF

Banggood GCRC

Here is a link to the Video:

This Aircraft is courtesy of Banggood!
Thank you Banggood for providing this Aircraft for Review!

This Warbird comes in a PNF and RTF Version.
I chose the PNF Version so I could use my Hobby-Grade Transmitter

Having "Murphy" with me every step of the way made for a very difficult Review.
It seemed as though, anything that could go wrong, went wrong ;-)
I've never rolled the Outtakes on a Review but this one certainly deserves it ;-)

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Volantex768-1 #P51Mustang #P51Warbird

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Spare Parts for the Volantex 768-1 P51D Mustang 750mm Warbird

***My Motor (Mine came with a Mount Plate and Spinner Lock)
Racerstar BR2208 1400KV 2-4S Brushless Motor For RC Models

***My Prop
2pcs 7040 7X4 7 Inch Nylon Propeller Blade CW for RC Airplane Reading
Posted by Amanda BH | Jun 02, 2020 @ 05:00 AM | 5,979 Views
VY2004 3150kv is really amazing design for 4S 5" ultralight sub-250g BNF drone.

but 1950kv is good for 6S if you not have weight requirement .

would like to hear your building and suggestions
Posted by nagas | Jun 02, 2020 @ 03:53 AM | 6,251 Views
The Coandă-1910, designed by Romanian inventor Henri Coandă was an unconventional aircraft powered by a 50 hp inline water-cooled Clerget internal combustion engine driving a ducted fan through a 1:4 gearbox which turned the 50cm compressor at 4,000 rpm. Coandă called it a "turbo-propulseur".

The exhaust from the piston engine was additionally vented into the duct via heat exchangers in contact with the central air flow to add heat and mass. Aviation reporters from The Aero and La Technique Aeronautique at that time were doubtful that the engine could provide sufficient thrust for flight.

The unusual aircraft attracted attention at the Second International Aeronautical Exhibition in Paris in October 1910, being the only exhibit without a propeller.

It is doubtful that the aircraft ever actually flew and is mired in controversy.

However, Coandă claims the aircraft did achieve a single short flight while ground testing the engine at Issy-les-Moulineaux, outside Paris in 1910, the powerplant forcing the plane airborne for a short time. As Coandă himself was not a pilot, he quickly lost control of the aircraft and crashed it to the ground throwing him clear of the burning wreckage with some slight injuries.

Despite the loss of the machine, Coandă noted how the expelled gases seemed to conform to the sides of his aircraft as it burned. This observation would lead Coandă to research the phenomenon culminating as the &...Continue Reading
Posted by herreraa | Jun 01, 2020 @ 08:09 PM | 6,888 Views
Finally starting my Jupiter Duck after 3 year i saw for the first time. Materials arrived today and they weight about 69grams. The come from Hoosier Coutout Service. I also ordered a Slowly V2 36in. My son ( 8 year ) wanted to Duck i started with that .

Some of the question i need to answer, i just put it in a list so i remember:
-Aprox final weight (without electronics)
-What motor should i use if i do not have a weight. I will still go with the recomendations from the designer or something clos.
-Where to buy the electronics in a kit or combo, motor/esc/servos/batery. I am new on RC and prefer to learn how to solder on other plane.
-What paint to use that do not affet weght too much...i want orange and yellow...but i need to defind that before start learning.
-Define best way to have a removable wing , i want to have access to electronics.
-Define if battery needs to go in a lower position. if so i need to redo the plans.

It will be fun.
Posted by old4570 | Jun 01, 2020 @ 07:41 PM | 6,970 Views
I flew the Bee with a 2s 1000mAh battery and

It kind of blew chunks at slow speed . All that weight just made slow speed performance = Not that great . The Bee was just shimming left and right all the time and I can't help but think that was possibly because I was close to stall speed . Cranking some power and the Bee flew just fine with more velocity .

Since I am a fan of flying slow rather than fast , something needed doing .

1) That x450 motor is just hanging too far out the back needing large batteries for CG
2) Solution is simple , move the motor further in .
3) So I cut the foam motor mount off , printed up a new PLA part
4) Using a 480mAh 2s battery , I slowly cut away foam till I got to a point where I thought I could live with things . ( Moving motor forward )

It's all glued and ready to rock and or stroll !
Less flying weight should hopefully equal better low speed flying characteristics .
Posted by RC Roundtable | Jun 01, 2020 @ 10:53 AM | 7,733 Views
Episode 109: "Cubs, Cousins, and Crashes" is now live!

In this episode, we talk about:
-John Brodak (2:30)
-Cubs and Cousins event (5:45)
-Lysander crash (6:00)
-Lee's report (22:02)
-Airplane drag races (34:40)
-Fitz flies foamboard (39:45)
-Guess Terry's new plane (47:00)
-Lee's Cessna 337 (55:50)
-Upcoming events (1:09:50)
-Helping newcomers (1:16:20)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].