Posted by phyngineer | Today @ 01:36 AM | 16 Views
The Indian Bureau of Surveying and Mapping plans to use 300 drones to help map the map so that the country has a more accurate map in the future.
For a long time, India maps lacked higher precision and electronics. According to the "India Times" reported on the 16th, the Indian Bureau of Surveying and Mapping for the first time plans to use 300 drones to map. A national map policy previously adopted by India clearly stated that all socio-economic development activities, natural resource conservation, disaster mitigation planning and infrastructure development require high-quality stereo data. Officials involved in the project said that the use of drones would enable them to produce high-resolution images of rural areas, which would facilitate the digitization of maps. Gilish Kumar, Director of the Indian Bureau of Surveying and Mapping, said: "Our goal is to provide high-resolution maps." He went on to say that aerial photography was used to map earlier, but this method is very expensive and has limitations. The drone can fly freely over a wider area, helping to capture sharper and higher resolution images.
In fact, with the development of drones and 3D point cloud model technology in recent years, not only India, but also many countries have begun to explore the application value of drones. The impact of drones is clearly deepening and sweeping the world. . As one of the few companies with production capacity in the whole industry chain, China MMC...Continue Reading
Posted by UnknownForces RC | Today @ 01:25 AM | 19 Views
Our 2WD Brushless 1 / 6th Desert Buggy from CARS&Details Magazine .

UFRC Growler GX1 (1 min 59 sec)

Posted by Hobby Details | Yesterday @ 08:36 PM | 69 Views
Classic Tool Bag - Honeycomb 14pcs Set
Hex: 1.5/2.0/2.5/3.0
Nut: 4.0/5.5/7.0/8.0
Flat Head: 3.0/4.0
Ball Hex: 2.0/2.5
Scissor / Reamer
Ti-Coated Tips
Wholesale Price please PM or contact me at: [email protected]
Posted by GroundControlRC | Yesterday @ 08:50 AM | 184 Views

Here is a link to the Video:

I have over 200 flights on this Airframe and the Foam is starting to get a little weak where the Wing Plate meets the Fuselage.
I did not design this Airframe to have a Wing Spar, however, I did update the Plans to include a Wing Spar.
Needless to say, in order to get another 200 flights from this Airframe a Wing Spar is neccessary.
I Retrofitted a Carbon Slat Wing Spar (1mm x 3mm) into this Airframe.
This is my 1st Test Flight after this Modification.

Let's see if I did Good, or if I did Bad ;-)

Here's what it cost me to Build this Parkjet ;-)

Ground Control F22 Mini V2 BNF Build $49.01 | PNF Build $38.42

That's pretty darn Cheap I'd say ;-)

I'd like to see a Factory Plane that inexpensive that can Fly this well ;-)

The skill level needed for this Parkjet is Beginner to Intermediate.
Beginner setup is a 2S Power System with a 6x4 Prop.
Intermediate setup is a 3S Power System with a 6x3 Prop.
It's a great Trainer on a 2S Power System, Fast & Acrobatic with a 3S Power System.

Plans are available to Youtube Subscribers & Patrons!

If you would like a copy of the Plans & Associated Documents send an email to [email protected]
In the Email Subject enter: GFS F22 Mini V2 Plans
We will get them to you as soon as we can.
You're going to love it ;-)

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups
Posted by old4570 | Yesterday @ 07:59 AM | 255 Views
Mods to my Whip .

Was it maybe 15 months ago I got the Whip ? Anyhow I have a bad back and the whip was medicinal ( get me out and being more active ) . At one time my back was so bad I could barely walk 100 meters . Now I can walk a few Kilometres to a local park and throw the whip around for 30 minutes to 60 minutes and walk back home and not be in brutal pain . ( A little sore perhaps )

Anyhow , early on I came to the conclusion I needed a launch peg to make life easier on me ( less painful ) . Already I was noticing a lot of surface stretch marks on the wing . And I thought without strengthening I would surely rip the wing apart if I put in a lunch peg .

Modified wing :
I removed the plastic hardware , the centre of the wing was glassed ( lightest glass from hobbyking ) . I also glassed the tip I wanted to put the launch peg on . Glassing also was used to secure the carbon rods in the middle of the wing . ( Mine were lose and there was a lot of centre flex )
After glassing I used laminating film ( 0.04mm = lets get that right ) . I now had a really strong and much stiffer wing than before . To counter the added weight the plastic wing hardware was given the heave ho and I cut up an ice cream container to make some pads for the wing screws .
I also added a counter weight on the opposite wing tip ( not sure this was needed )
Now I had a wing I was sure would handle peg launching .

Strengthening the wing just meant that energy would...Continue Reading
Posted by phyngineer | Yesterday @ 07:14 AM | 206 Views
The reporter learned from the provincial traffic police corps highway detachment that the provincial traffic police corps highway detachment took the lead in enabling drone air inspections in the jurisdiction, and the drones focused on capturing traffic violations such as emergency lane parking and big car occupation. This is the first time that the high-speed traffic police department of our province has enabled drones to participate in highway traffic management.
UAV inspection duty is mainly used for aerial photography to observe road traffic congestion and capture traffic violations. According to the police who used the professional training of the UAV in the early stage, in the scope of the radiation coverage of the drone, it is possible to find where to shoot, and all kinds of violations of traffic rules and road safety can not escape its law. The trajectory of all vehicles and the number plate of the vehicle can be taken very clearly. For some motor vehicles that do not follow the prescribed lanes, illegal lanes for illegal lanes, and emergency lanes, they can be captured, providing strong evidence for the traffic police department to be punished according to law; and capturing and exposing some illegal activities such as retrograde vehicles. Elimination of blind spots in road enforcement.
In addition to the use of drones to capture traffic violations such as emergency lanes, the most important thing is to use drones to view road traffic congestion and traffic accident scenes, to provide timely and accurate information support for slow blocking and smooth operation. In the event of a traffic accident causing congestion, the traffic police can not arrive at the first time, the drone first arrives at the incident, and the scene is transmitted to the rear for the first time, according to the actual situation, the next step is given, and at the same time, The traffic police will have a more comprehensive understanding of the traffic accident scene and provide a basis for accurately handling the accident.
Posted by Bill M - RC | Yesterday @ 06:00 AM | 215 Views
Hi fellow rc pilots & rc enthusiasts

Happymodel 1102 8500kv Brushless Motors review. These Happymodel EX1102 8500kv brushless motors are one of the lightest motors around, well crafted & designed with double bearings & good dynamic balance.

You can get these Happymodel Brushless motors in UK here:

You can get these Happymodel Brushless motors Internationally here:


Happymodel 1102 8500kv Brushless Motors review (5 min 49 sec)

Posted by Hobby Details | Sep 18, 2019 @ 09:14 PM | 299 Views
Premium 12 in 1 Magnetic & Lock Screwdriver Set

Box4.0/5.5/7.0/8.0 mm
Phillips 4.0+/5.0+
Flat 4.0-/5.0-

Titanium Tips(6.35mm/1/4)

Wholesale Price please PM or contact me at: [email protected]
Posted by DoubleEagle | Sep 18, 2019 @ 07:54 PM | 318 Views
Giant 1/7 Scale RC Land Rover Defender 110. Hobby grade, 2 speed, hardbody! (11 min 40 sec)

Great review by Tomley RC Garage
Posted by old4570 | Sep 18, 2019 @ 07:50 PM | 355 Views
no more

It's now a RC glider ..

It's blowing a Northerly Gale at the moment ..

But early this morning I took it into the back yard for a quick and dirty CG check with a Zippy 350 .

It glided across the back yard like a dream and smacked the brick wall

I havent glued the motor , so no damage .

But looks very promising .

A-team Hannibal (0 min 15 sec)

Posted by JohnVH | Sep 18, 2019 @ 05:28 PM | 382 Views
Flight two on this twin EDF Fighter!
Freewing SU-35 FLIGHT TWO Twin 70mm EDF Thrust Vectoring Jet (5 min 48 sec)

Posted by | Sep 18, 2019 @ 05:06 PM | 358 Views
I've recently completed my review of the happymodel larva-x and have also covered off
  • Setup
  • Custom PID tune
  • Custom filters
  • Durability tests
  • Comparison of onboard DVR to goggle DVR

It's a great little quad but there are some durability question marks around the motors in particular and as you can see in my review, Happymodel are already working on a response. That aside it's a great value, fast, nimble and very quiet ultra light micro 'toothphick' that is well suited to park flying and other environments.

Full review is here:


Posted by aopen3434 | Sep 18, 2019 @ 10:55 AM | 1,260 Views

X8 - RDM encoder Brushless geared SERVO Motor 32bit control power unit
This is NEW Driver board for BGC motor RMD-S and RMD-L, ONLY Difference is installed a different driver board with RS-485 industrial communication used for robot and other Automation. This motor is best for servo gimbals, turntables, robots. The motor have the same size and fixed holes, RMD-S and RMD-L servo motors are compatible with or BGC driver board.
RMD-S and RMD-L are based on RS-485 industrial communication ,the advantage is anti-jamming ability. (suitable for long distance transmission)and also the motor speed higher used for robot and

...Continue Reading
Posted by Master splinter | Sep 18, 2019 @ 04:15 AM | 1,389 Views
Im looking to purchase the VQ Beechcraft Baron 69″ Wingspan EP/GP Civilian version pm me if you have one to sell
Posted by rc38joe | Sep 18, 2019 @ 02:49 AM | 1,417 Views
Hiya Fellow Flyers:

The Annual Omahawks R/C Auction date has been set and the Hall is reserved for our next auction on Oct 13, 2019..

The Omahawks R/C Club is hosting a R/C Auction in Omaha (See attachment) @ Hobby Town Hobby Plex located at 10200 Scott Circle, Omaha, NE 68122 on Sunday October 13th, 2019.

Doors open at 7:00 AM CST, Auction starts promptly at 10:00 AM.

Information will be posted @ Clubs web site at: , check right navigational column.

Question contact Kevin Hyde at 402-670-8320

Food and Refreshments offer for sale, Admission is $5 kids under 14 are free.
Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,438 Views
Desert buggy design body panels made of clear polycarbonate.