Posted by Cox PT-19 | Today @ 01:24 AM | 284 Views
So, the second .020 adapted to it's backplate nicely, putting in a bunch of time on it's stand. Started easy, and settled into a 1/2 hour run after a little needle work.

Now it's time to turn to the Skylark.
Posted by RoyAceWings | Yesterday @ 11:21 PM | 405 Views
RC Sailboat Keel Bags by AceWingCarrier

We are making along with our RC Sailboat Rig Bags a RC Sailboat keel bag for the removable keels on some of the RC Sailboats like the Dragon Force and the Kyosho Seawind and many more... We understand you want just as much protection of these components as you want for the rest of your Sailboats. We have designed the Sailboat Keel Bag to hold the Keel and the Rudder for safe transport to and from your sailing site.

For some New to sailing you might ask what a keel is:
The keel is basically a flat blade sticking down into the water from a sailboat's bottom. It has two functions: it prevents the boat from being blown sideways by the wind, and it holds the ballast that keeps the boat right-side up. The ballast is usually lead. There are different shaped keels, some are stationary fixed in one position and some work off of hydraulics or cables to bring the keel up and down allowing you to go into shallower waters… A pretty neat feature if you want to beach a boat or your just sailing through very shallow reefs.

The following is an Example of the Sailboat Keel Bag, along with the position of a keel on the bottom of a Sailboat and the Keel separated from the boat to be put into the Sailboat Keel Carrier. This will be listed with the RC Sailboat Rig Bags
Name: RC Sailboat Keel Bag 1.jpg
Views: 0
Size: 150.9 KB
Description: Name: RC SeaWind Sailboat 1.jpg
Views: 0
Size: 40.3 KB
Description: ...Continue Reading
Posted by Cox PT-19 | Yesterday @ 08:34 PM | 710 Views
After several false recoveries, it appears that I AM actually doing better...health-wise...so-much-so that I cranked up the heat out in the shop for a break-in of Matt's "Black Lynx" .049 (THANK YOU ALL VERY MUCH AGAIN!!!)), along with my first test run of Bernie's .020 Pee Wee Backplate Assembly.

The Black Lynx was started up on Sig Champion 25% fuel, turning a 5-3 gray. I ran it for over 1/2 hour nonstop with refuels on the run. leaning it out to peak and back as the time passed. Toward the last 5 minutes, it was peaking in the mid 17k's, with good needle valve response.

While it may get some photo ops with the 2m B.O.T. before too long, it'll probably end up in my Cox Viper for this year's S.M.A.L.L. Fly-Ins.

THEN....I assembled an .020 with the new backplate I got from Bernie. I chose one of my healthier .020's, hoping for as little hassle as possible, and am proud to say it all went well.

The upper mounting holes are REAL snug for my #2 socket head servo screws, and I wanted a washer of some sort to keep them from digging into the plastic. So, I used a drill motor and Dremel to first, turn down the flange under the socket, and also rounded the flats of a couple #2 machine nuts.

Drilled out, the machine nuts became thick washers, and fit into the backplate's top two grooves pretty nicely. I know this all seems like a lot of fuss, and I'm totally prepared for someone to show me an embarrassingly easier way to do this. The little sucker looks good to me now though!

It started up after little coaxing, fired up and ran steadily...also for a 1/2 hour +. I'd lost my light, and was too lazy to set up an led lamp for the tach, but it was sounding like it was in it's zone.

Now, on to assemble another .020 and it's backplate for installation on my slowly moving Carl Goldberg Skylark project.
Posted by xortig | Yesterday @ 07:53 PM | 1,093 Views
Not all our blog posts make it here.

To see the latest blog posts please see
xortig.com/blog/

We more contribute to the RCGroups forums themselves. To see all the threads we have created or posted to, see the statistics box down lower on the right hand side of this page. (You'll have to be logged in to see these threads).
Posted by old4570 | Yesterday @ 07:16 PM | 1,109 Views
1) VD5M FrSky Rx ...

Ok , it was working ... Then it stopped working !
I purchased this Rx about 2 years ago and left it in a box .
Honestly , last few years I have had nothing but issues with FrSky receivers ..
So my SU-27 project has taken several steps backward because of this receiver .
I literally had to break the SU-27 to get the receiver out for test and evaluation .
It could be FUBAR or it could be something as simple as frequency offset .
I am replacing the Rx with something similar but DSMx .. ( No issues with DSMx )

2) Fly Bear F16 ...

FX-823 Stabilized Two Channel RC Thunderbirds F-16 Fighter Jet Flight Test Review (10 min 37 sec)


No no no ! I got the free flight version .
And hope to make it RC ..
The F16 Project = It's the same foam model less the toy Rc stuff ..

3) Got some more props in the mail ..

4) XT60 to XT30 converter plug came , now I can charge the battery for the XK X450 safely ..
No more risky business ..
Posted by xortig | Yesterday @ 06:46 PM | 1,115 Views
This is the first blog entry for Xortig.

We are all about head tracking systems for FPV aero planes and slope soarers.
Posted by scousethief | Yesterday @ 01:57 PM | 1,816 Views
https://www.banggood.com/custlink/DmGDQA9k9i



The first version of the SG906 was pretty amazing and it is the only Aerial Photography quad that I still fly due to the GPS actually working exactly as it should . This time we have a 2 axis gimbal and some upgrades made to the Camera, 5G Wifi and software ( which is always good) and we even have some flashy Gif's (thats my trademark thanks very much ), could ............ could this be the ultimate budget AP Quad ????? If they would upgrade the cam to Firefly 4K or CaddX Tarsier quality this would be killer !

Description:
Item name: ZLRC SG906 PRO Beast RC Brushless drone
Pressure sensor: Height setting
Frequency: 2.4Ghz
Focal length: 50X
Camera: 2-Axis Gimbal WIFI 4K Camera
Lens: Adjustable camera by transmitter, 110°
Motor: 1806 brushless motor
Motor power: 1700/KV
Drone battery: 7.4V 2800mAh
Remote battery: 4x1.5V "AA" battery
Flight time: About 25 mins
Charging time: About 6 hours
USB Charging: 5V
Control distance: 1200m (Free interference and no occlusion)
5G Wifi image transmission distance: 600-800m (Free interference and no occlusion)
GPS follow me: About 30m
Image follow me: About 5m
Hand gesture shooting:1-5m
Color: Black
Quadcopter size: 28.3x25.3x7cm (unfolded) 17.4x8.4x7cm(folded)
Product's Weigh: 551.8g
Takeoff weight: 527g
App Name: HFun PIus
Frame rate: 25 fps
Item Front camera Down-looking camera
Video Resolution 2048*1080(TF)
SD mode: 1208*720(APP)
HD mode: 2048*...Continue Reading
Posted by Old_Pilot | Yesterday @ 07:55 AM | 2,473 Views
finally finished her....spent yesterday and this morning finishing all the banjo work (push rods, control horns, sequencing, rates, expo, throttle cut, etc)

However, it's a brisk 23 degrees this morning....maybe this weekend for the maiden.

Specs:
GForce 3542-1200 kV motor (2 down 2 right)
Xoar 9x4.3 prop
65Amp ESC with 5 Amp BEC
Power Up 17g metal gear servos
Lemon 6 channel receiver with satellite
2600 mah 50 C 4 cell
64 oz all up
R/E/A/F/T
100-80-60 rates all with 35% expo

Wish me luck..video if successful
Posted by racedouge1 | Jan 19, 2020 @ 11:49 PM | 3,689 Views
I'll never get used to obnoxious running lights on machines, And I'll never get used to covering them up with beer cans.
Posted by racedouge1 | Jan 19, 2020 @ 11:22 PM | 3,717 Views
I guess if you've never land a qaud on one arm...You're not trying hard enough.
Posted by siriusflier | Jan 19, 2020 @ 10:58 PM | 3,802 Views
I just started flying RC airplanes the first week of November, 2019. I had actually tried over 10 years ago with cheap 3 channel planes, but was not very successful back then. I have been flying helis and quadcopters a lot since then, but got the bug to try airplanes. I had some success with flying quadcopters in acro but never really got good at it.

So the first plane I bought was an XK A430 four channel foam plane. I was successful in flying that one but also managed to crash it and do major damage on about the sixth flight. I don't know anyone around here that is into RC and as far as I know there are no RC clubs around, so I have always had to learn on my own. I do read a lot on RCGroups and pick up a lot of info from here, but that is not the same as having a competent person to teach you or show you what you are doing wrong. I learned a lot about repairing a foam plane from the A430 crash, but I had to order a new prop mount after putting it all back together. Still didn't know if it would fly right after the repairs, so I also ordered an XK A600 and received it about the same time I got the prop mount the last week of November, 2019. Main reason for ordering the XK planes was because I have an XK X7 radio I could fly them with, which is a little bit better programmable transmitter.

I had better success with the A600 and it helped me learn how to fly a plane. I have crashed it, but have only sustained minor damage. I liked the way I could fly it really...Continue Reading
Posted by FeiJi | Jan 19, 2020 @ 10:07 PM | 3,922 Views
Yesterday my wife and I visited the Flying Tigers Museum in downtown Kunming. I didn't really know anything about them until we moved here and now I want to document any artifacts, memorials, and cemeteries that are left here....Continue Reading
Posted by old4570 | Jan 19, 2020 @ 09:40 PM | 3,927 Views



Product Link > https://www.banggood.com/custlink/DKvmNnHnlc

This is a really small Rx ( FS2A Flysky protocol - thats the new flysky protocol , not the old 9x protocol ) = To be tested !
Mine measures some 18.7mm Long and 11.8mm wide .. ( It really is small )
Has a ? is it 4A or 5A brushed ESC built in .
Has solder pads for battery and brushed motor , or you can run VIA ESC source .. ( 5v Max )
Apparently you can have your cake and eat it !

This Rx is going into the brushed 450x flying wing ..
So hopefully some useful information shortly .
Posted by tdems1795 | Jan 19, 2020 @ 08:04 PM | 4,222 Views
To all members
I believe that if you are looking at this blog you may have some interest in a classified ad that I recently posted, but may be a little suspicious of any ad’s posted by a NEW member (Jan 2020) with NO trade rating (ZERO). I can certainly understand being cautious I know I would feel the same way if I were in your shoes. So first off let me assure you this is not any type of a scam, I’m just a devoted son try to comply with his father last wishes. As stated in the text this kit comes from the estate of my father, an avid R/C hobbyist and collector who lived in Portland Oregon. My dad built and flew model air planes from 1937 to 1996 in the Portland, Camas and Hillsborough area and amassed a large collection..
My father passed in 2002 and in his “last will and testament” stated that his collection of RC planes, kits and accessories were not “TOYS” and needed to be treated accordingly. His collection passed to my mother and remained “untouched”, per her wishes, until her passing last year. It is now time to deal with this collection. I know my dad would want the items in his collection to go to builders and flyers of model air planes who have the same passion for this hobby as he did. Therefore, selling these items on eBay just doesn’t seem right.
So while researching classified ads of some of my dad’s kits online I came across “RCgroups.com”. I thought this might be a good place to start exposing his collection, so I joined. I do not know any members,...Continue Reading
Posted by RC Roundtable | Jan 19, 2020 @ 03:46 PM | 4,822 Views
Episode 99: "Clueless, Careless, and Criminal" is now live!
http://rcroundtable.com/podcasts/mp3/RCR_episode_99.mp3

In this episode, the gang talks about:
-Old School Model Works Mambo (3:05)
-Freewing T-33 EDF (12:30)
-The FAA still sucks (23:45)
-Terry's new toys (43:40)
-Snow Blower (1:05:20)
-Lee's workbench (1:12:05)
-Fitz's workbench (1:15:40)
-Swap meets (1:23:45)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by Gravythe Clown | Jan 19, 2020 @ 01:09 PM | 5,082 Views
So I started this project 6 years ago. It was my first helicopter purchase, a blade 400 with fly bar.
I bought the fuselage from Darthdrk if memory serves me right. I do remember the original build went to get her quick and very half thought out on my side. At the time I started it I had little helicopter experience and thought I would just take my Blade 400 convert it to FBL and stuff it in the fuselage. And that’s exactly what I did.
First flight went just as your thinking right now, horrible and end as you would expect l, picking up pieces. And putting in a box for a later day. As I learned a very important lesson. Helicopters are more complex than planes.

Forward 5+ years and many more helicopters and experience to me purchasing an ARF A-109 450 from MotionRC. It was ok and had a few flights before I crashed it. Because of parts I was forced to rebuild it into a MD500e. Learned a bit about helicopter mounting into fuselage. After that was done I had a really bad vibration which had caused some flight issues. So doing some research I decided to go with a more scale look with a 5 blade head to utilize a low head speed.
Well I learned more about helicopters than I had ever anticipated. At the end I have a very nice flying MD500E that is rock solid.

So after that finished and feeling more knowledgeable and confident, I pulled the BlueThunder project out. I won’t get into to much of the build, but I got the phasing , the control rods and servos and the blade...Continue Reading
Posted by DutchRC | Jan 19, 2020 @ 12:05 PM | 5,308 Views
Halloa people

Rush FPV recently released a new VTX and this one is TINY So they at least chose the name correctly :P
I pre-ordered a couple late last year, so I hope they also Perform well

Link to it: Rush Tiny Tank VTX

In this video I'll show you it's performance but also how it is installed (BF VTX tables):

Rush TINY Tank - Super Small VTX! :D - TEST + HOW TO INSTALL (21 min 53 sec)

Posted by kopterheld | Jan 19, 2020 @ 08:55 AM | 5,613 Views
Eachine EMAX EAT03 RC Car
Coupon: BGEachineFPV - https://www.banggood.com/custlink/vmDGQKe3AR
77€ - with FPV goggles
EMAX EAT03 is a small RC car with FPV camera and remote control. Great toys for every young RC beginner. Identical to the EMAX Interceptor RC car.


The red EMAX Interceptor RC car is identical with the blue Eachine EAT03
Coupon: BGEMAXRC - https://www.banggood.com/custlink/mKvmQ0Ptop
Coupon2: 5ca607


Video - EMAX Interceptor Eachine EAT03 FPV RC Car (DE) (EN subtitle)
EMAX Interceptor Eachine EAT03 FPV RC Auto (3 min 23 sec)


It is really fun to drive around the apartment by car. Since the car is very small, it can get through almost any small gap. The perspective is funny as if you were a little mouse running through the apartment. Behind thicker walls, the video reception is worse, so a better antenna may help. A great FPV car that I can recommend to everyone.
And as I said, the difference between Eachine EAT03 and Emax Intereptor is only the color blue instead of red.


...Continue Reading
Posted by NashVegas | Jan 19, 2020 @ 08:43 AM | 5,619 Views
Absolutely loving my new 94” MXS. Not sure why I waited so long to own one. Really wide flight envelope, and excels at both high energy tumbles as well as low and slow.
- Extreme Flight airframe and bling
- GP76 for power
- Northwest RC spinner and pilot
- B&E Graphix
- Emcotec fuel dot
- Spektrum Powersafe receiver