Posted by PFendi | Today @ 10:32 PM | 8 Views
A few hours after finishing the build, I was flying it in fpv for the first time and was having a great time. Then I flew right into the long edge of a van door (my van!! no noticeable damage tho!). Some frame damage, and one motor got popped open. Luckily, there is no further damage! New frame and set of motors has been ordered. This is why you all said to buy an extra frame right away, isn't it.

In photos:
The bent standoff soaked up much of the crash, and the camera was spared by only half a millimeter! (hard to see in the pic)
The GoPro was ejected immediately, snapping the 3 zip-ties holding it down. Velcroed down for the pic. Crash footage coming soon!
Posted by PFendi | Today @ 10:11 PM | 29 Views
Finally finished my first quad!

Specs:

Frame - Anniversary Special Edition Martian 215mm (Martian 2 Carbon Fiber Frame)
FC/ESC AIO - Racerstar StarF4S 30A
Motors - Emax RS2205 2600KV Racing Edition Motors
Rx - FrSky R-XSR
Camera - RunCam Swift 2
VTX - Eachine TX 5258
Batteries (for now) - 2x Scorpion 3s 1500mah 75C
Props - Emax AVAN Flow 5 in 5x4.3x3

If you have any suggestions, please speak up! Im new to this, and would really appreciate any feedback!
Posted by Mad_angler1 | Today @ 05:51 PM | 314 Views
DJI have launched a new version of the Ronin called the Ronin-SC





The Ronin-SC is a single handed gimbal for mirrorless cameras that can support models up to 2kg and provides 3 axis stabilised footage whilst on the move.

Being smaller and lighter than the S the Ronin-SC weights just 1.1kg and is specifically designed to be used with mirrorless cameras such as the Panasonic GH5, Sony A7 and A6500 Series among others.

This new smaller Ronin-SC has many of the features that we have already seen on the original Ronin-S however DJI have added a number of new features such as ActiveTrack 3.0 and Force Mobile.


Here is my video overview and review of the Ronin-SC Pro Combo


DJI RONIN-SC PRO COMBO OVERVIEW & REVIEW HANDS ON WITH GH5 (12 min 58 sec)


If you would like more info or to order the SC checkout the below link

https://click.dji.com/ABic0xam9mzfbn...=0045&ch=RCGSC

New Design





DJI have overhauled the arm design of the Ronin-SC, this means that the arms donít clash in most cases and that it now folds away a lot easier and will fit back into its case even when balanced for most cameras.

...Continue Reading
Posted by zFg437 | Today @ 03:29 PM | 433 Views
...
Posted by basslord1124 | Today @ 02:58 PM | 465 Views
So after seeing Flitetest release the FT Edge it totally blew my mind on how awesome it looked. Unlike previous Flitetest foamboard designs, this thing had more curve and sleekness to the design. It made me wonder if Flitetest used some other material besides foamboard to make it look that good....nope, the plane was made out of foamboard. So that really attracted me to the plane and made me add it to my never ending list of plane projects.

Looking at the Edge briefly, I kinda thought it may be too complex of a build and that I might just make it a low priority project. Perhaps something to tackle next year. But thanks to the awesome Flitetest community and Flitetest forums, folks encouraged me to go ahead and proceed with the build. So here it is, in its early stages.

FT Edge: Build Intro Part 1 ....What have I got myself into? (9 min 8 sec)


Expect to see more Edge build video progress and eventually a glorious maiden flight (hopefully without a crash) video.
Posted by Cox PT-19 | Today @ 02:28 PM | 501 Views
I've had this account for some time, but haven't made any entries, mostly from be swamped with involvement in my club and other pursuits. I've decided to post some notes, photos and videos from my Facebook, along with others as this develops.

All statements are my own, about my own experience with various miniature flying machines. I claim no expertise in any area, other than maybe at having fun...at which, I feel I'm pretty much a "Fun Ninja"...I have a blast with this stuff.

Because of the audience I anticipated on Facebook, many of these posts are geared toward new flyers or people with interest, but limited or no experience in the hobby.

I'll try to respond to comments in a reasonable amount of time, but there may be some stretches where I don't get back right away.

We'll see how all this goes...
---------------------------------------------------------------------------------------------------------------------------------

Earlier in the month, I'd posted a few photos on my Facebook page of this little "Storage Locker Rescue" I'd named Lil' Punkin.

I'd been waiting for another nice evening to get some footage of the whole plane from it's top camera (having so much fun, I forgot to do it on that day), but haven't had a chance to try it.

So...I crunched together some footage of what I had.

Lil' Punkin is a rudder-only model---it has no elevator to control pitch, so has to be carefully balanced and trimmed for a gradual climb while the engine is running, then transition to a smooth glide when the engine quits.

MANY early R/C planes were flown in this configuration before more advanced radios became cheap enough for a modeler to afford.

Lil' Punkin Flying Late in the Day (4 min 13 sec)

Posted by Joe Pierson | Today @ 12:09 PM | 620 Views
Hi Guys,
Here is my 1930 Granger, has home made wire wheels, Tail wheel and pilot ,
Joe
Posted by UpNup | Today @ 11:17 AM | 663 Views
Aces of Iron Products insisted on replacing the U.S. WW2 Fighter Pilot they sent due to some blemishes. This gave me the opportunity to paint one in a khaki color scheme. My figure is 1/7 scale.

Some tips to pass along:

1. Brush olive green paint into the folds of the coat and shadows.

2. Paint a very thin base color. A khaki camo rattle can spray was used making sure the dark colors showed through.

3. I wanted my pilot to have on a shirt and tie rather than an ascot. The tie and shirt collars were cut from a discarded foam elevator. CA was used to glue the pieces in place. The tie was painted khaki and shirt dark brown. The shirt was lightly dry-brushed with a lighter shade of brown to show some weathering. The tie was crammed in place and I left the wrinkles. They were glued at an angle to hide the lumpy ascot beneath.

4. Brush on enamel paints starting with the eyes and face. Generally follow the AoI painting tips. Enamels layer and don’t blend well. I’ve basically smeared the colors together using odorless mineral spirits on a clean brush.

5. Paint light colors to dark colors across the figure. It is okay to use gloss colors, but only if you plan to use a final lacquer coat at the end.

6. Touch up any spots that need to be brought back in line.

7. Washes: Mix one drop of brown paint with 10 drops of odorless mineral spirits. Use the wash on the life vest and white straps. Some can be used on the face, adding steaks below the eyes and in the...Continue Reading
Posted by HD48 | Today @ 09:05 AM | 812 Views
This is the 73" Pilot Yak 54 with a DLE 35 in it. Really enjoying this plane!
Posted by nigelsheffield | Today @ 02:19 AM | 1,338 Views
My contact at xt-xinte has told me of their new website with wide range of products Inc cinewhoops toothpicks etc etc parts and full quads.
Prices look good as always from xt-xinte cheaper than banggood.
Right now 20% off and free postage, with similar / cheaper prices to banggood anyway there are some deals to be had!
Defo worth checking out
https://bit.ly/2y0ipEv

And use my code for 5% off. NIGELSHEFFIELD

Name: Screenshot_2019-07-22-08-23-17.png
Views: 2
Size: 1.33 MB
Description:

Edit , I just ordered the toothpick pro for $106!!!!
Posted by Ivy long | Today @ 01:56 AM | 1,241 Views
T240 is a new design dual balance charger by HTRC,which can charge two different kinds of batteries simultaneously. Multi-function, high power, Utilizing 3.2 inch color LCD Toch screen display, easy operation, built-in cooling fan, DC 11-18V or AC 100-240V dual power. Designed for charging LiPo LiFe Lilon LiHV NiCd NiMh Pb Smart Batteries.
welcome to visit our website: www. ht-rc.com. I can give you the best price, also be OEM for you.

contact:Skype:Butters long
Email: [email protected]
Posted by JohnCC | Today @ 12:11 AM | 1,344 Views
Diatone 2019 GT R349 TBS VTX Edition 135mm 3 inch 4S FPV Racing RC Drone (aff)
US$149.99 Promotion Sale From July 16 to July 31



Video Reviews

(In Progress)

Main Specifications

● Weight: 130g
● FC: Mamba F405mini/MPU6000 ;OSD;16M Flash;BEC
●Camera: RunCam Micro Swift
● VTX: TBS UNIFY 800mW
● ESC: Mamba F25 /25A 4S ESC Dshot 600
● Motor: Mamba Racing MB1408 4000KV

Comments + Criticism

In progress.

Photos



...Continue Reading
Posted by old4570 | Yesterday @ 10:05 PM | 1,470 Views
UMx Whipit's (two whips) Old Modified Whip VS 100% Stock Whip ( Short Version ) (1 min 6 sec)


Took the two Whips out , was windy .
Too windy to really compare , but here is the very short version .


Picture 1

FMS V-tail 800mm - Wanted one for a long time ! ( Not a house brick like a certain Super K )
I will do a pictorial on it when the wind backs off ( Northerly Gale Blowing ) , weather says next week end .

Picture 2 and 3

MG 800 from GB , only took about 2 months to get it .. ( 3 months after checking )
It is a very interesting kit - I will do a thing on it !

Bare Bones Kit weight = 119 Grams ( Just the foam bits )
Building to Federally Mandated 250 Gram Limit for unregistered , unlicensed pilots .
Gives us some 130 grams of stuffing .

Picture 4

100cm Hand Throw Glider -
I ordered two , and I took this one out of the box . Did I mention the Northerly Gale ?
Anyhow , I had to replace the steel ballast ball for a larger one to get CG .
And it looks to be a capable glider .
Ok , it is BENT !!!! , a little here , a little there . In fact , the only thing not bent a little was the vertical stab .. That was straight for some reason .
SO it looks like a bit of time with the hair dryer is required .
BUTT !!!! - It does glide , even bent .
How to RC it ? Thats the question .
Posted by Bill M - RC | Yesterday @ 08:53 PM | 1,512 Views
Hi fellow rc pilots & rc enthusiasts

SJRC F11 Pro, ZLRC SG906 Beast, SJRC F11, MJX Bugs 4W review - Camera shootout Reveal & Results- Here are the results of the replicated 4 short flights with these great low cost GPS FPV Quadcopter Drones that all have min 1080p HD cameras. Thank you to everyone that responded and said which video they thought was best and as you will see here, the result is very interesting.

SJRC F11 Pro, ZLRC SG906 Beast, SJRC F11, MJX Bugs 4W review Camera shootout Reveal & Results (4 min 33 sec)

Posted by GroundControlRC | Yesterday @ 06:04 PM | 1,675 Views
Review - King Kong/LDARC Tiny Wing 450 - Sweet Micro Wing ;-)



Here is a link to the Video:
https://www.youtube.com/watch?v=GcW85nkS2nk

This item is courtesy of Banggood.
I thought this Tiny Wing would make for an excellent Micro FPV Wing ;-)
It has several flight modes; 6-axis, 3-axis, and manual.
It's made from EPP Foam which should make it extremely durable ;-)
I will perform the Maiden Flight as soon as weather permits ;-)
I will also post another video providing Tips on the setup and links to the components I used.

Get one today from Banggood!

Here is a link to this Cool Micro Wing:

KINGKONG/LDARC TINY WING 450mm Wingspan EPP FPV PNP With Flight Control
https://www.banggood.com/KINGKONGLDA...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/