Posted by BobFromMars | Today @ 12:04 PM | 484 Views
Since stricter regulations have been moving in on the hobby, I've been very interested in making a sub-250g HD build to keep my flights in the legal end of the spectrum. On top of that, I'm a bit of a sucker for budget builds, so I tried to make some conscious choices there, too. Thanks to some help from Banggood, I've finally got the chance to make that a reality!

Here is the build I've spec'd out, and why I've made the choices I did.

Frame:
I wanted a decent frame for this build that would handle some abuse (because I suspect this quad is going to get flown a lot!). I also wanted to make sure it had a suitable protection for the components inside. I settled on the GepRC Gep-PX2.5 Phoenix frame. This frame has enough room for a three-high stack (ESC, FC and cam board) and a 3d-printed piece on the back that will handle the VTx mount, antenna mount, and tubes for the receiver antenna. As well, the aluminium brackets for the camera mount should provide plenty of protection for the camera itself.

GepRC Gep-PX2.5 Phoenix



Control Stack:
For the flight controller stack, the choice was fairly obvious. I went with the Diatone Mini Mamba. This stack has been around long enough to prove itself, and it's done a fine job of that. The layout works great, it comes with all the wires you need (including a capacitor!) and the price isn't beat by any other product.

Mamba F405 mini mk2



Motors:
For 2.5 inch props, I think you're looking at a minimum of 1105...Continue Reading
Posted by unboxingexp | Today @ 11:00 AM | 533 Views
Rocket RC car (1 min 3 sec)


Here is a crazy mod for my 1/10 touring car :-)
Posted by Spike1972 | Today @ 10:42 AM | 557 Views
Hi, can anyone help on where to get a battery for an sg906? Three times I've tried from China but cant get one delivered. Please.........any help out there?
Posted by rclad | Today @ 09:59 AM | 633 Views
I should know better by now not to fly when I'm tired. After more than 460 flights on my 95" Extra 330SC-E I finally buggered up a landing so bad yesterday that I expected some serious damage to the airframe. It was 95 F with light winds and clear skies, but I caught a bit of updraft on the approach as I came over the end of a cornfield with stalks about 6 feet tall. The black geotex runway must have been generating some thermal activity as well. The plane wasn't descending as it normally does, even with power at idle.

I didn't notice how slow the plane was getting until it was too late. By the time I started to advance the throttle the left wing stalled and immediately fell. The plane dropped out of the air from about 5 feet up, came down on the left wing tip and smacked down hard on the landing gear. That was the first tip stall I have seen on this plane, and I practice stalls on every flight (for IMAC). This is not a design issue. I was drifting to the right side of the runway and must have applied some left rudder to stop the drift. After careful inspection I found no damage. This is a very strong airframe!

After swapping out batteries I got right back in the air and flew the same approach. This time I kept the nose down through the updraft, then brought it back to level once over the runway. I ended up landing midway down the runway, but I greased it in just above stall speed, so the rollout was completed before the end of the 600' runway.

I got off easy this time. Don't get complacent on landings!
Posted by Rogosi | Today @ 08:39 AM | 726 Views
I ran into Wayne, the creator and designer of the unique Toughjet plane. Originally configured with a pusher prop (along with a one of a kind sound) we are now able to get a 70 mm 12 bladed ducted-fan unit with the plane. Wayne is well known in the New England area and is a fixture at many local fun fly events, including the Neat Fair.

The addition of the EDF unit is a game changer for the plane. Much quieter, and it also feels faster. This can still take off from the ground in a vertical position which is a blast to see and try! This flies with a 22oo or 2650 4 cell pack, I would recommend at least a 45c discharge rate. Flight times are anywhere between 4 and 7 minutes. All up weight is about 2-5 pounds and the fan kicks out about 3 to 3.5 pounds, so guess how this thing moves out?

As usual Wayne passes off the sticks to whoever wants to give it a try and of course I couldn't say no. A nice toss into the wind and the plane took off like a a rocket! The newer planes also have extra control surfaces so they are very maneuverable. I loved hovering the plane into the headwind and then killing the power and gliding right in. It was a pleasure to fly. I've owed two of the original prop versions and they really are tough, they take a beating and are easy to repair if damaged.

These are configured in the original F-14 model, in addition to the F-15 and now the F-35.

I decided to pick up the F-15 version of the EDF along with the gear. Once the servos arrive I'll get this together.

Special thanks to Wayne for generously donating two Toughjet kits to the AMA for our Aviation Day fun flight in Muncie!

Stop by the Toughjet site and check out the videos of these things flying!

https://toughjets.com/
Posted by lawrence4 | Today @ 05:35 AM | 863 Views
Two color cover film make it.
Posted by BigRHS | Yesterday @ 08:48 PM | 1,362 Views
Here are a couple of pics of my pitbox and the tools and parts.
Posted by BigRHS | Yesterday @ 08:30 PM | 1,376 Views
Pics of my associated 4,2 buggy. Great runner and drives fantastic.
Posted by unboxingexp | Yesterday @ 12:21 PM | 1,863 Views
Posted by TinkleWid | Yesterday @ 07:28 AM | 2,160 Views
Armattan Gecko 3 Build Upgrade 🦎 Acehe Lipo, Brotherhobby Motors, Caddx Turtle 🐢 Caddx Ratel 🐼

00:01:00 Massive Punchout (Acehe Lipo)
00:03:10 Backwards Slide (Brotherhobby motors)
00:03:47 First big crash
00:04:05 Lost vtx signal, lost GoPro lens 😢 (ordered another one!)

Armattan Gecko 3 Build Upgrade 🦎 Acehe Lipo, Brotherhobby Motors, Caddx Turtle 🐢 Caddx Ratel 🐼 (4 min 36 sec)


Just memory of a day out having fun flying my new Armattan Gecko 3 inch quad around with new lipos and motors. So much more powerful although need to work on that flow and not just charge around like a maniac !! Shot in 1080p @ 30FPS.

Armattan Gecko 3 upgraded with:
Brotherhobby Tornado T1 1407 4100KV https://www.banggood.com/custlink/vv3G9GL4bt
Acehe 850mAh 4S 75C-150C LiPo Battery - bought in the UK
TPU Mount for the Caddx Turtle: https://www.banggood.com/custlink/mKDvSDHcC0
Thingyverse Mount for Caddx Turtle: https://www.thingiverse.com/thing:3210256
GoPro replacement M12 Lens (less fisheye): https://www.banggood.com/SHOOT-170-D...r_warehouse=CN

Other Equipment Used (3 inch build):
Armattan Gecko 3: https://www.armattanquads.com/gecko-3/
Caddx Ratel Starlight Camera: https://www.banggood.com/custlink/3m33VyzOW2
Caddx Turtle v2: https://www.banggood.com/custlink/DDmmPAUn4K
Receiver to replace bulky HGLRC TX20 VTX: https://www.banggood.com/custlink/mDGDHEzopf
Gemfan 3052 https://www.banggood.com/custlink/m3v3VNUn4U
XM+ : https://www.banggood.com/custlink/3DmGFNqsBw
VRD2 Pro Goggles: https://www.banggood.com/custlink/KDvmHAUnsR
Jumper T8SG https://www.banggood.com/Jumper-T8SG...d=124521124520
VTX03S (UK Warehouse) https://www.banggood.com/Eachine-VTX...r_warehouse=UK
TPU Mount for Caddx Turtle: https://www.banggood.com/custlink/mKDvSDHcC0

Not Used: (spare kit)
ND Filters (ND8) for Caddx Ratel
https://www.banggood.com/15mm-Caddx-...tlinkid=292341
Caddx Turtle v2 https://www.banggood.com/Caddx-Turtl...18277502201801
VRD2 Pro Goggle https://www.banggood.com/Eachine-VR-...tlinkid=124518
HGLRC Flame: 1407 motors: https://www.banggood.com/custlink/G3mD5NzQjT
Lipo Tattu 850 4S:- https://www.banggood.com/custlink/GGmKFAkbg0

Caddx Turtle V2 / Caddx Ratel Combo 🐢 Armattan Gecko 3 🦎 HRLGC 1407 Motors 🦖 HD FPV Freestyle
Armattan Gecko 3 Frame 🦎 Caddx Turtle and Ratel 🐢 HRLGC 1406 Motors 🦖 Sussex FPV Freestyle Drone (5 min 43 sec)

Posted by RCflyerCT | Jul 13, 2019 @ 08:13 PM | 3,020 Views
Had a great time with my BVM 1/7 scale F18 at this week's Kentucky Jets. The F-18 has scale lights, a smoke system, afterburner rings. Kingtech 160 turbine. Love this bird!!!
Posted by vtach688 | Jul 13, 2019 @ 05:51 PM | 3,154 Views
I got a run cam2 recently and love it. It got some really good features and very functional app for your mobile devices.

Here’s a video with a little more detail and great footage. Just some of the creative things possible.


Run Cam2 (6 min 47 sec)