Archive for December, 2016
-
Views: 205
Nice looking bit of artwork on the front of the display box. -
Views: 258
The rear of the box has useful info regarding the unmarked transmitter controls. -
Views: 262
Here's what awaits inside! Charge the flight battery, format the SD card, pop in the camera and some transmitter batteries and you're off! -
Views: 196
All accessories come neatly bagged. -
Views: 230
The transmitter continues the "retro-future" theme of the model. -
Views: 250
Here's the transmitter as seen from the rear. -
Views: 213
The camera matches the candy apple red finish of the model. It plugs in and is then easily locked in place. -
Views: 251
The camera as shipped. It reminds me of some sort of Mid-Century Modern appliance.
Comments (3)
Add Comment
-
Views: 241
Per the time lapse assembly video I found on YouTube, the ceramic disc capacitors were installed first. The eight-pin IC which houses most of the AM circuitry was installed with a socket. That's per the video and the socket was provided by a friend. -
Views: 350
The trickiest part was soldering this surface mount IC which I left up to that same friend who gave me the socket. It contains the FM circuitry. -
Views: 228
The board is complete! -
Views: 229
Everything's in place as viewed from underneath. -
Views: 336
The speaker leads and battery terminals are shown in place. Just a bit more soldering and it's ready to rock. -
Views: 224
The front of the case is shown soon after my grandson applied the dial. It was a peel-and-stick and yes, it reads "Paeansonic." Still trying to figure out how to pronounce this... -
Views: 204
The battery access door is hinged which is a nice touch. -
Views: 198
You can get almost anything at Aldi. Even batteries.