Posted by newelectro | Today @ 05:52 PM | 7 Views
Magellan XL second flght today
Magellan 2nd flght102018 (26 min 58 sec)

Posted by newelectro | Today @ 05:17 PM | 18 Views
Mario xplus and my Virage
Mario xplus plus my Virage102018 (14 min 52 sec)

Posted by john green | Today @ 04:49 PM | 32 Views
Got my Pits S-1S today and set it up. It was not hard but care needs to be taken with the wing strut pins and the spinner.
Most e flite planes will have the CG set correctly when you use the recommended battery but this one is way nose heavy
if you use the recommended distance from the leading edge of the top wing at 86 MM.

Rather than believing the manual at 86 MM, I have opted to just place the recommended battery in the tray and fly it.
I will do this for two reasons. I have bought quite a few e flite planes and they all fly well using the recommended battery in the given place.

Pulling the battery back (half off of the tray) it is still too nose heavy (measuring CG at 86mm.
Also, the UMS Pitts is supposedly scaled and so is the S-1S, and the UMX has the CG more forward.
I think this plane will be very cool and I will be flying it with the 1800 4s.
Posted by newelectro | Today @ 04:44 PM | 36 Views
Jimmy Virage and Mario xplus
Jimmy Virage and Mario xplus102018 (6 min 51 sec)

Posted by Merch | Today @ 04:03 PM | 45 Views
Emax Babyhawk R Pro 2.5 Inch 120mm FPV Racing Drone PNP/BNF Magnum F4 OSD 25A Blheli_32 Smart Audio VTX

Full Video Review Below!

Brand name: Emax
Item name: Babyhawk R Pro 2.5
Frame: 120mm unibody frame with PC durable canopy/pod
Flight Controller: Mini Magnum F4 2 lite
ESC: 25A 4 IN 1 BLHELI_32 ESC 20X20 Mounting
ESC Current Sensor: On board
F405 Matek HEX Target using Betaflight OSD
Motor: 1106 6000KV
Propeller: Emax Rush 2.5 inch
VTX: 25-200mW FCC compatible with Raceband Channels/ Smart Audio control MMCX Connector
Receiver: D8 channel
Camera: Emax/Caddx S1 CCD FPV Camera
5 available Uart ports
2 onboard RGB programmable LED's

Package Included:
1 x Babyhawk R Pro 2.5 FPV Racing Drone

...Continue Reading
Posted by newelectro | Today @ 03:57 PM | 53 Views
Mario xplus
October 20, 2018 (3 min 5 sec)

Posted by newelectro | Today @ 03:49 PM | 51 Views
Mario xplus action
October 20, 2018 (5 min 50 sec)

Posted by newelectro | Today @ 03:39 PM | 63 Views
Mike Hunt rc heli logo rocking the house
Mike Hunt rocking the house with logo rc heli (5 min 22 sec)

Posted by GroundControlRC | Today @ 03:29 PM | 56 Views
Tutorial - How I FPV'd my Drift Car

Here is a link to the Video:

I like to FPV anything I can because FPV is sooooo much fun ;-)
Ok, so time to FPV my Drift Car.
The Drift Car in question is a WLToys K969 1/28 Scale Drift Car, however, this process should work with anything.
Depending on your setup you may need to use different connectors than I did.

Now, on to the Fun ;-)

Here is a link to this Drift Car:
Wltoys K969 1/28 2.4G 4WD Brushed RC Car Drift Car

Here is a link to a couple of Micro SBECs:

Here is a Link to the FPV Camera:
Turbowing 5.8G 48CH 25mw Transmitter 700TVL 120 Degree Wide Angle Wireless FPV Camera NTSC - Copper Antenna

Here is a Link to the FPV Camera Mount:
Diatone Universal Mini Camera Lens Adjustable Holder For RC Drone

Stay tune for some FPV Fun with this Drift Car ;-)

Build, Fly, Crash, Repair, Rinse & Repeat!

Happy Flying!

See Us On Youtube | Patreon | RCGroups | Facebook
Posted by TMac54 | Today @ 01:16 PM | 104 Views
Well, here it is, my 1st Ever Build-Ascent X 2.5 Micro! 4-Board Stack with TMotor/Racerstar 1106/6000 motors! Amazed with frame versatility. Variable motor mounts, wide range of camera angles, slide camera forwards and backwards, room for a 4-board stack! Incredible!
Thoughts? Speed enhanced video below:
MIcro FPV 2 5 Inch Drone Build Part 2 FlexRC Ascent X 2.5 (21 min 57 sec)

Posted by vbtaylor15 | Today @ 12:25 PM | 122 Views
I am looking for this plane. Does anyone know the name or what is is?

Posted by unboxingexp | Today @ 11:08 AM | 148 Views
Here is some onboard camera footage from ThiEye's Dr. X mini drone. The video's full HD bitrate stored on the internal micro SD card is about 11-13 mbit/s, the 720p footage transferred to the app is just around 2 mbit/s. You can get it here with free worldwide shipping:

ThiEye Dr. X flight test (1 min 55 sec)


Posted by Absaroka | Today @ 09:37 AM | 159 Views
Been flying this Cub all week---like it.
FMS Cub (0 min 40 sec)

Posted by Tazkiller85 | Today @ 05:00 AM | 262 Views
Yep Les Amis,
3 GAGNANTS .... Voir plus si affinité !

Règlement du CONCOURS :
- Du 20/10 au 27/10 minuit
- Tirage au sort dans la vidéo du 31/10
Pour participer il faut :
- Etre abonné bien sûr
- Un seul commentaire par personne
- Liker la vidéo
- Expliquer en une phrase pourquoi vous devriez remporter ce lot .

Résultats du concours LUDYLAB, 3 Gagnants et ... SURPRISE ! (12 min 32 sec)


Suggestions de produits en lien avec la vidéo (en cliquant sur ces liens affiliés vous soutenez ma chaîne) Merci à vous :

- Batterie CX95S :
- Batterie IR8M :
Masques conseillés (petit et moyen budget)
- Masque EV800D :
- Masque VRD2 PRO :
- Masque FXT VIPER V2 :

- Masque FXT VIPER V2 ( Coupon "NewViper" :

Mon matériel :
- Caméra GIT2P (casquette) :
- Stabilisateur smartphone ZHIYUN SMOOTH Q :
- ONEPAA X2000 Caméra :
- Caméra DBPOWER 4K (écran tactile) :
- Micro cravate (casquette):
- Chargeur ISDT D2 :
- Chargeur AOKoda 1S :
- Testeur ISDT BC-8S :
- Chargeur Balance ISDT Q6+ : https://goo....Continue Reading
Posted by Clickety | Today @ 04:36 AM | 318 Views
For regular news, new plane development and progress, visit my Facebook group called 'Clickety's Jetworks'

Click on the links for Plans.

01. YF-23 Black widow / Grey Ghost _ Pusher/2x55mm EDF.
02. F-35 Lightning II _ Pusher / 60-70mm EDF.
03. Bugatti 100p _ Depron parkflyer.
04. JA-37 Viggen _ Pusher / 60-70mm EDF
05. Bae Hawk _ Pusher / 60mm EDF
06. A-10 Thunderbolt II _Twin Pusher
07. Drake _ Pusher.
08. EurofighterTyphoon _ Pusher / 60-70mm EDF
09. Harrier _ Pusher.
10. Tornado _ Pusher / 60-70mm EDF
11. Vulcan _ 2x70mm EDF
12. Su-57 _ 2x 5" Pusher / 2x 64mmEDF
13. F-16 Falcon _ Pusher / 60-70mm EDF
14. B2 Spirit _ 2 x 64mm EDF
15. F4 Skyhawk _ Pusher / 60-70mm EDF
16. X-wing Starfighter - Pusher
17. Sepecat Jaguar _ Pusher / 60-70mm EDF
18. SU-47 Berkut _ Pusher / 60-70mm EDF
19. English Electric Lightning _ Pusher / 60-70mm EDF
20. Mig 29 _ Pusher / 2 x 50/55mm EDF
21. Mirage III _ Pusher / 60-70mm EDF
22. Mirage 2000 _ Pusher / 60-70mm EDF
23. F-104 Starfighter _ Pusher / 60-70mm EDF
24. Bugatti 100p - PSS Balsa Glider
25. Blackburn Buccaneer - Pusher / 50-64mm EDF (X2)
26. F22a Raptor - Pusher / 60-70mm EDF
27. EM-10 Bielik - Pusher / 60-70mm EDF
28. Gloster Meteor twin pusher / >64m EDF

Use of these designs are for non-commercial use only.


I don't tile my plans, as there is a way to automatically tile plans to match your printer paper size within Adobe Acrobat. See my video below :-
Jetworks Tiled Plans (3 min 5 sec)

Please be kind and donate IF you enjoy these designs. and post pictures / videos! Each design takes many hours. Paypal $10 to

If you have access to a 3d printer, Many parts are available as 3d print files. (.stl) - including my motor mount. see below.

Happy flying
Posted by frank4wing | Today @ 02:12 AM | 424 Views
Posted by y.takahashi | Today @ 01:59 AM | 510 Views
The 16th Seto Ohashi Bridge Model Ship Competition
I will introduce my Jetfoil model that participated in the competition. Other model ships please watch the video of YUO-TUBE.

ジェットフォイル3隻紹介 (3 min 43 sec)

第16回瀬戸大橋模型船大会の様子 (6 min 57 sec)
...Continue Reading
Posted by old4570 | Yesterday @ 05:25 PM | 644 Views

I was on youtube and saw a very interesting video on Laminating Film ..
A gentleman was showing some one how to repair a damaged EPP Foam plane ..
And I thought , wow .

What I found local ( Australia ) was some 0.04mm laminating film . ( Sold by Renz - Australia ) For all you Ozzies ..
Now I have only done a little research and a little testing with this stuff , so maybe get on youtube and search Laminating Film .
It will apparently do open structures .
And it will bond to Foam at reasonable temperatures .
I was using just a ordinary clothing Iron at around 50% temp range .

The stuff I got is 440mm wide and some 200 meters in length ( 600 feet ) and as mentioned 0.04mm thick . ( 10 thou )
There is a bright shinny side and a dull side , the dull side has the glue .
The first thing I did when the roll arrived was to take a soft pliable piece of foam and laminate it on all sides . ( Just a 5mm or so thick bit of foam sheet )
After laminating it it was much stiffer and felt a lot stronger ( as it should )

Using the laminating film for repairs ....
This is where it gets interesting , when you damage foam it can lose its integral strength / stiffness and become very soft and pliable .
This happened to a little chucky I got , the elevators had lost all their strength and stiffness .
Using the laminating film to cover both sides , the elevators are nice and stiff , holding their shape really well .

With things like foam safe glue , we can now glue a smashed...Continue Reading
Posted by geives1 | Yesterday @ 02:45 PM | 683 Views
This is a ML Boatworks PX335 FE Tunnel
Motor = Castle Neu 1515/1Y 2200KV
ESC = Seaking V3 180A
Prop = Octura M-545 Reduced Diameter