Printing at 40microns (.04mm). Makergear M2

More to come...

Beside the 3 basic flight modes, GPS, Sports and ATTI. You will have 4 software choices.
TapFly
ActiveTrack
Normal
Intelligent

This page allows you to enable and disable the VNS. I would recommend turning on the first two options and leaving the 3rd option disabled until you become familiar with the system. Please understand if you enable backward flying during AT the copter could run into an object since it can not see going backwards.
Remember you can still control distance from object with elevator no matter if this option is on or off while in Active Track (AT) mode.

VNS Example RTH:

DJI Phantom 4 RTH - With Object Avoidance (1 min 31 sec)

This is a really nice feature, it allows separate expo settings for both GPS and sports mode. First thing I would ugliest is to turn down yaw way to fast

Some pictures of the new DJI Phantom 4. In my honest opinion its DJI best work yet..

Some don't like the looks. I would have to tell them pictures doesn't do it justice! The whole craft is streamlined and has a much stronger shell the previous DJI phantoms!...Continue Reading

RTH that could have gone very wrong. New object avoidance saved the day!!

DJI Phantom 4 RTH - With Object Avoidance (1 min 31 sec)