burkefj's blog View Details
Archive for October, 2017
Posted by burkefj | Oct 04, 2017 @ 12:01 PM | 4,766 Views
Here is something I just finished, 3" diameter tube, 55" long, 37" wingspan, 26.5 oz rtf using a 32mm Aerotech G-12 long burn rocket motor. This is a 1.5x upscale of a smaller 2" version I did last month that flew well. The idea was to take the wing planform from the 2001 space odyssey shuttle and make a flyable design. I had already done a Pan Am logo on one of my other rocket gliders so I thought Trans World sounded better anyway....HS-65hb servos, a single 500mah 1s lipo and AR-400 receiver, all mounted at the CG, I adjusted wing location to avoid any need for balast. Here are some build pictures and a flight video. Wings are double thickness 6mm depron with lightweight hollow 3/16" carbon spars. Parts tracings/parts list and instructions are on my site at http://www.dynasoarrocketry.com My depron is some of the stuff with a curve in it, but by doing top and bottom wings I was able to reverse the curve and along with the spars it flatted out nicely. Same for the vertical stab. Look at the plans pulldown and select the orion plans.

Large Orion Starliner RC rocket glider flying on G-12 rocket motor (1 min 52 sec)
...Continue Reading