unfaix's blog View Details
Posted by unfaix | Nov 25, 2015 @ 07:24 PM | 35,066 Views
dropped to $745.46
Current as of 25th November 2015


-details below-

Selling my yuneec q500+ all original accessories. I modified it so that it'll accept any 3s battery with xt60 connector. Specifically the 3dr iris 5200mah 3s battery or the multistar 5200.

It also takes the original yuneec battery as well.

I changed the controllers system files so that the boot up sound is removed. You know that loud ass sound that's played at maxinum volume.

I removed all of the branding.

I took apart the gimbal grip to add a connector that accept a 3s lipo battery(included).

Last longer and fixes the crap designed yunnec should not have release. They've since fixed the grip that accept the correct amount of battery .

Also, modified their cgo2 android app so that you can enable audio recording with out using the stupid transmitter to turn it on. How in intuitive is that?

Anyway 830 and its yours.

Will post pictures up asap.

And shoenyou proof that it works perfectly.

I like this yuneec, but going to get the solo to mess with.

Here is the thread where I posted instructions and my apk for use with the cgo2 and the steady grip.

Here is a video showing the silent start up sound.
Turning off the St10+ start up sound (0 min 40 sec)

Here is the st10+ playing music, and since the transmitter has a headphone jack, you could listen to your jam while flying
Get Lucky with St10± (0 min 14 sec)

Here's pictures of it.

The xt60 stow in the above area, and doesnt move around when you are using the official yuneec battery.

Here it is with the 3dr 5.2A lipo, easily fit the multistar equivalent.

Still has the plastic on it.

dropped to $745.46
Posted by unfaix | Feb 26, 2013 @ 09:44 PM | 36,598 Views
Decided to turn my gopro around to see how it look on my QAV500 using home made cc3d.

It's pretty cool.

-down the street-
Different perspective (4 min 16 sec)

-at the park-
Different Perspective - At The Park (2 min 45 sec)
...Continue Reading
Posted by unfaix | Feb 05, 2013 @ 08:48 PM | 36,791 Views
This is on my QAV500 frame, using Open Pilot's CC3D, 10x4.7 on FM-4008 620kv motors, 4s 3.3A, 5.8ghz tx, Sony ccd camera and GoProBlack.

Flies like a dream.

Cruising around the block with QAV500 and Copter Control 3D (7 min 23 sec)

Posted by unfaix | Feb 01, 2013 @ 05:45 PM | 36,620 Views
kk2, simonk - hobby king f-20, 1200kv motors, 9x4.7, 3s2.2a in video.
even crazier with 4s

armatan (5 min 51 sec)

Posted by unfaix | Jan 27, 2013 @ 02:14 PM | 36,735 Views
Had some nice weather, so it was time to fly around the neighborhood.

Flies well with crappy props and off balanced fpv stuff.

Frame is the 2nd gen armatan, with kk2 fc and 4s 3.3a, getting 9.46 minutes at 3.78v

hit a tree acouple of times, twice and nothing was damaged.

The second time, I broke a carbon mix prop, took 2 minutes to fly again


PS.5.8ghz just suck balls in the city.

that's .6 watt transmission right there..
FPV with Armatan and a tree. (4 min 14 sec)

Posted by unfaix | Sep 10, 2012 @ 10:11 AM | 37,153 Views
I've been flying at night ever since I got some led installed.

It's more challenging than I though; cannot see the damn trees!!

I've finally strapped a gopro to my head and made a recording of it.

Spotted UFO!!! OMG (4 min 48 sec)


+ Hoverthings FPV frame,

+ 910kv 3xxx series motor,

+ Turnigy 30a esc,

+ 11 x 4.7 (totally smacked the garage flying low, agressively fast, at night, around trees [soo responsive with 9 inch prop!!!]
You still need room to make corrections no matter how responsive itis )

+ NAZE32 Flight controller made my timecop from abusemark, the one with all the sensors.

+ Default settings from the latest baseflight, seriously!!
Posted by unfaix | May 20, 2012 @ 03:36 PM | 37,551 Views
Gone Flippin' (0 min 40 sec)