UnknownForces RC's blog View Details
Posted by UnknownForces RC | Today @ 12:06 PM | 217 Views
Ghost Rabbit GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 13 sec)


The Ghost Rabbit GR1 comes with real carbon fiber accent plate inserts on trailing arms, rear axle brace, steering centerlink and center transmission mounts to make the car's look match the car's performance.
Posted by UnknownForces RC | Yesterday @ 10:58 AM | 912 Views
Complete 4WD solid rear axle Ghost Rabbit GR1 medium gearbox (0 min 9 sec)


Complete center transmission housing of our new Ghost Rabbit GR1, a 4WD 1/5th scale car with solid rear axle. It comes with remote lock for center and rear diff as standard. Total gear ratio can be changed within a range of 9:1 to 15:1; stock gear ratio is about 13:1.
Posted by UnknownForces RC | Oct 16, 2019 @ 11:28 AM | 1,436 Views
GR1 4WD Gear Modulus 1.5 (0 min 16 sec)


GR1 4WD gears, machined teeth, higher strength and precision,more durable, gear modulus 1.5.

Our gears always run in dual ball bearings to reduce radial runout. We also strive for larger dimension bearings wherever possible to increase their load carrying capabilities for longer life and reduced maintenance. We are not just making products, we care for every detail.
Posted by UnknownForces RC | Oct 15, 2019 @ 09:06 AM | 1,404 Views
The medium gearbox of GR1 4WD SOLID REAR AXLE TRUCK (0 min 13 sec)


The medium gearbox of GR1 4WD SOLID REAR AXLE TRUCK is shaped like an owl (the part of the eye is a secondary oxidation process, commonly known as two-color oxidation)
Posted by UnknownForces RC | Oct 15, 2019 @ 09:03 AM | 1,312 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 36 sec)


GR1 4WD medium gearbox shell laser pattern (needs to oxidize again, the pattern will become other colors)
Posted by UnknownForces RC | Oct 15, 2019 @ 09:02 AM | 1,304 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 15 sec)


Nylon ball end of GR1 4WD, stainless steel ball head, careful assembly when processing, reduce the shaking and virtual position caused by the error.
Posted by UnknownForces RC | Oct 15, 2019 @ 09:00 AM | 1,176 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 17 sec)


GR1 1/5 4WD SOLID REAR AXLE TRUCK steering (6 bearings). Metal, nylon combination, strength and toughness and double buffer spring for better protection of the servo.
Posted by UnknownForces RC | Oct 15, 2019 @ 08:58 AM | 1,160 Views
UFRC GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 18 sec)


The middle gearbox parts processing of GR1 1/5 4WD SOLID REAR AXLE TRUCK.
Posted by UnknownForces RC | Sep 27, 2019 @ 04:59 AM | 1,627 Views
Design Highlights:

The strength of 1:4 scale car (the maximum frame strength supports 12S power);

The wheelbase of 1:5 scale car (wheelbase 555mm);

The length of 1:6 scale car (total length 760mm)

The price of 1:8 scale car(use lots of metal parts, saving a lot of money for OP upgrades later)
Posted by UnknownForces RC | Sep 26, 2019 @ 03:10 AM | 668 Views
GR1 1:5 4WD SOLID REAR AXLE TRUCK (1 min 45 sec)


Medium gearbox, Steering and throttle servo arm, Rear shock mount, Trailing arm of GR1 1:5 4WD SOLID REAR AXLE TRUCK.
Posted by UnknownForces RC | Sep 21, 2019 @ 03:33 AM | 564 Views
UFRC Growler GX1 1/6 scale Brushless Buggy (0 min 17 sec)


Racing video from our customer RC-Car-Shop Hobbythek.
Posted by UnknownForces RC | Sep 20, 2019 @ 01:25 AM | 664 Views
Our 2WD Brushless 1 / 6th Desert Buggy from CARS&Details Magazine .

UFRC Growler GX1 (1 min 59 sec)

Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,776 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:24 AM | 1,729 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:17 AM | 1,730 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:27 AM | 1,694 Views
(Left Losi right UFRC)
The huge spindles at the front suspension fill the rims almost completely and guarantee high load capacity. The joint balls in the a-arms have a diameter of 15 mm (FG uses only 10 mm for the same vehicle size).

Front and rear spindles/uprights prepared for installation of in-wheel brakes.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:06 AM | 777 Views
Drive shafts with wheel-side CVD joint as in Losi 5ive vehicles. The drive pin on the diff side is also replaceable and has a diameter of 6 mm!
Posted by UnknownForces RC | Sep 17, 2019 @ 03:02 AM | 624 Views
Differential cup made of cold extruded aluminum, no fragile cast part!
Posted by UnknownForces RC | Sep 17, 2019 @ 02:48 AM | 618 Views
Large-volume shock absorbers with oversized 8 mm piston rods.