Any one that can help it would be great! I just purchased some MKS Servos and I am wanting to run a SWB Tray for my rudder servos. I am not sure which one I need to get. Do I want the Hitech one or the Futaba one?? I am assuming that it would be the Futuba one since they have the Futuba Splines on them.

Here is a video of me flying my new Edge .(3d flying)

88" Extreme Flight Edge (3 min 1 sec)

Hey guys. I am wanting to purchase a camera that hooks to my hat so that I can video tape my flights. Any suggestions on one that I should look into in purchasing???

Harper and myself enjoying a evening of Flying. She is only 1 and she is already crying to go outside and fly!!

Nothing better then Blue Skies and a couple SLICKS being hucked around

It was a great day at the field with my dad. Here are a few pics of us with my new plane.

Ok so I need some suggestions! Tonight I put this plane in the air and I heard some vibration. I brought it around to land it and the prop and casing blew off. Of course in the corn field where I can't find it! I came up to the plane and this is what I found. As far as I am concerned this never should have happened! This was my 11th flight with it and have had no problems up to this point. What should I do??

51" AJ Slick motor box destroyed (0 min 49 sec)

I know that I am probaly not doing this in the right location. I have a Yak 54 (65") for sale (NEVER CRASHED)and I have a Saito 115 Golden Knight engine that I bought for it, but because I do 3D i decided to buy a DLE 30CC for it. The only reason I am selling this is to get enough money to purchase my 71" Slick! I also have a T-28 with a upgraded Power 10 Motor in it! (Unlimited Verticle!) I will throw both motors in! If somebody offers me a bulk package deal I will even throw in a 47" World Models Extra 300! I am trying to clear some room also. Here are some pictures!
I will put the prices with the pictures.Right now in the Yak 54 I have JR ST126MG High Torques. I am open to offers on this. None of the items I have, have been crashed. The Yake 54 fell out of the back of my truck and Damaged the rudder a bit. That is it.
** ONCE AGAIN I AM SORRY IF I PUT THIS IN THE WRONG LOCATION. I DIDNT KNOW WHERE ELSE TO PUT IT!
I WILL GO 550 for everything here! The motor is listed at 550 alone. I live in Modesto, California area....Continue Reading

MY NEW AJ SLICK! Well there first one I got ended horrible. 2nd Flight Elevator Bolt Came out! This one is put together right and is a success! I will post the maiden flight soon. I will be ordering my 71" AJ SLICK(GAS) Soon. I have a DLE 30CC Ready to be put in a SLICK!! Here are some pictures!

My favorite thing about this entire hobby is how close it has brought my Dad and I. Here are some pictures of My Dad and I and a picture of my new DLE 30CC motor in my Yak 54.

Hey guys I am looking for a little help! I just bought a brand new DLE 30CC motor and I am hoping someone can give me detailed instructions on the best way to break it in. (when I can actually fly with it, how many gallons I need to put through it while it is grounded? What is the best mix (30:1) I am just new to engines so I was hoping somebody could give me some advice. Even on what prop size to use. Thanks guys, Keith

What a great night to fly!! I started flying in Jan and this is my stress reliever! I really enjoy flying 3D and here is a video from tonight. (Sorry the video is from my iphone so it is not the greatest!

Carbon Z Yak 54 3D flight (4 min 30 sec)

Thanks for everyones helpful tips, it has made me a better pilot just from reading all of your post!

Nothing special in this video. I put a 30cc Rhobi weed motor on it. NOT ENOUGH POWER!!! Bought a DLE 30 cc to put on it. This plane flew good though.

Cap 232 maiden flight (4 min 28 sec)

Guys,
I am wanting to purchase a video Camera for my Rc plane and I don't want to waste my money going through 5 different ones to find the right one. I fly Gas and Electric and put everyone of my planes to the test with 3D Flying. I could sure use your guys help with which one I should purchase!! So what one should it be???

Here is a Video from 4 Months ago. I have now been flying for 5 1/2 months and I'm progressing. I have to say that all the knowledge that I gather from RC Groups is helping me greatly! Thank you all

Yak 55 Stunts (1 min 4 sec)

Hey guys I am hoping that somebody can tell me how to upload videos on here for you guys to watch?? I use a IPad and a computer for this site. Can anyone help me???

I am still in need of a 51" aj slick fuselage. Does anyone have one they can part with??

Hi my name is Keith Ille. I have currently been flying for six months now. The list of planes that I have are
1. Carbon Z Yak 54
2. T-28( foam blue)
3. Yak 54(Seagull black & Yellow scheme)
4. Yak 54 EPP 1100 ( Techno)
5. Yak 55( Hobby King)
6. Extra 300 ( 48")
7. Apprentice( horizon hobby)
And the one that was my favorite was the 51" AJ Slick. I flew it two time and the Elevator Bolt came out and crashed it. I have heard great things about them but I have emailed and called them at least a 100 time( no joke) and they don't answer or return my calls! When I crashed it I ordered all the parts I needed exept the Fusalage and now I don't need them because it is cheaper just to order a new one.
So I am looking for a list of really good outfits that will help me spend my money! That I can count on having good customer service when I need them. I have found that so far HH has been the most reliable, but I am looking for a Rock Solid 3d plane that I cane put my Hacker A 30 12XL and hacker pro 70 ESC in. I have heard people are really helpful on here so what do you guys got for me??
Thanks, Keith

Hi I have a Saito 115 GK engine which cost around 600 and I am looking for a DLE 30v2 (30 CC) to trade with or something comparable. I just bought a Yak 54 and made the mistake and got the wrong size motor. This motor is just broke in. Please let me know if you are interested in either purchasing it or trading for another motor!
Keith

Hi, my name is Keith and I bought a 51" slick from 3dhs two weeks ago. On my third flight the nut came off the bolt to the elevator. I think you guys can figure out what happened from there. I have tried calling 3dhs everyday for the last two weeks and I have emailed them several times. I can not get them to get back to me. I am needing a fuselage desperately. I was hoping somebody had a extra one. They are out of stock. This crash pretty much took the wind out of me. I was hoping somebody could help me out. I will buy it.