Posted by Dynam RC Detrum | Jul 07, 2020 @ 09:10 PM | 6,805 Views
Z3-FPV easy to programed by Detrum 3in1 card, adjust the level offset, adjust the Gain. Flight mode: Gyro off Mode, Normal Mode, Aerobatic Mode,Auto-recovery (Safe)Mode- Make your plane easy to fly, even in bad weather with wind!

RTH : Z3-FPV can automatically detect the rc-loss status and enter the return mode. (The default circle radius is 50 meters and 50k/h, Return speed and hovering radius can be set in the programming card according to properties of your aircraft )

Detrum Z3 FPV Autopilot (14 min 45 sec)

https://www.youtube.com/watch?v=GMmLAFjbi4s&t=32s


on our official website delivery around two weeks: http://store.dynam-rc.cn/en-us/Product/view/id/784.html

on Amazon delivery around two weeks : https://www.amazon.com/gp/product/B088LML63C

or ebay : https://www.ebay.com/itm/283877739289

US:https://www.bitgohobby.com/detrum-z3...-card-with-pmu
Posted by MatthewCarlson | Jul 07, 2020 @ 02:54 PM | 6,752 Views
This build is all about performance (Basically the most versatile UM RC bush plane).

With a 3000 KV motor and a 2S 7.4V 280 mAh battery it should have more than enough power to accelerate in a vertical climb.

No stickers and no gear leg fairings to save weight.

Should be a quick build and an awesome performance aircraft!
Posted by Edweirdo | Jul 07, 2020 @ 02:15 PM | 6,689 Views
All the good people I have dealt with are amazing, everything is as described ,shiped a.s.a.p. very thankful to you all. I just can't seem to get on individual post to give the report. I'm still trying, any help please? Thanks!
Posted by alex_nikiforov | Jul 07, 2020 @ 09:43 AM | 7,048 Views
HGLRC Forward MT VTX Mini FPV Transmitter 5.8GHz PIT/25mW/100mW/200mW/ 400mW/600mW Switchable Built-in Microphone For FPV Racing Drone

HGLRC Forward MT VTX Mini. Измерение мощности. (4 min 58 sec)


Links:
HGLRC Forward MT VTX Mini
ImmersionRC RF Power Meter v2
UNI-T UT210E
Jumper T16 Pro
Posted by hyper1on | Jul 07, 2020 @ 09:00 AM | 6,406 Views
Hi, a little battle between Matek M8Q-5883 and BN-220.
All FC powered via USB, so GPS not affected by HD FPV Cam or 5.8VTX.
Russian narration with english subtitles

Дорого богато или дешего сердито? Сравнен&#10 (4 min 10 sec)

Posted by Justwingit | Jul 07, 2020 @ 08:47 AM | 6,864 Views
Sport flying the UMX Citation as a hand launch belly lander recently...:
E-flite UMX Cessna Citation Longitude Twin 30mm EDF - Pure AWESOMENESS! (10 min 4 sec)


The little jet does surprisingly well in this configuration - tons of power and all sorts of fun !


Posted by GroundControlRC | Jul 07, 2020 @ 08:46 AM | 6,278 Views


Review Part 3 - MinimumRC Micro Spitfire Warbird BNF Kit New Servo & CG Test Flights

MinimumRC Planes:
https://www.minimumrc.com/

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

Here is a link to the Video:
https://www.youtube.com/watch?v=xIJOpJaB4Ls

I love these Micro / Nano Planes from MinimumRC!
This is the third Plane from MinimumRC I have reviewed thus far and this BNF Kit is courtesy of MinimumRC.
These Planes are so small and light they make great Planes for flying outdoors in smaller areas and for flying indoors during the Winter or when the weather won't permit flying outdoors.
I think MinimumRC is doing some very good things in the design of these Planes and they also have a great inventory of electronics for your own Micro / Nano Plane projects.
The Builds are pretty simple and the downloadable Build Manual really makes it easy.
If you've never checked out MinimumRC you should take a look @ https://www.minimumrc.com/

I compared the full movement of the Aileron Servo with another Micro Servo I had in my inventory and found it was only moving half the distance it should.
So, certain that the Aileron Servo is bad, I relaced it and now I'm going to test out the Roll Rate again and also test some CG adjustments to see what feels best with my Flying Style ;-)

Here are links to the Kits, Associated Electronics, and other Needful Things.

MinimumRC Micro Spitfire Warbird:
https://www.minimumrc.com/spitfire-p0080.html

...Continue Reading
Posted by bragee | Jul 07, 2020 @ 07:48 AM | 5,337 Views
A beautiful place in the Alps. Passo Giau, Mondeval with FPV drone. Dolomiti Cadore Hiking Dolomites (2 min 24 sec)


Flying above horses and cows 2000 meters above sea level.
Between Passo Giau and Mondeval, FPV flying.
Hiking in Italy.

Volare sopra cavalli e mucche a 2000 metri sul livello del mare.
Tra Passo Giau e Mondeval.
Escursioni in Italia.

#nofilter
Posted by nsg | Jul 07, 2020 @ 07:45 AM | 5,431 Views
https://www.aircraft-world.com/aw/fi...r_eos_chargers . Need a Windows computer.

Update instructions attached.

The latest firmware supports HV lipos. The UI, two lines of text controlled/edited by buttons, look archaic compared to modern touchscreens, but the chargers still work well.
Posted by Amanda BH | Jul 07, 2020 @ 01:53 AM | 5,966 Views
Brotherhobby released new motor, VY1504.5 2650kv / 2950kv / 3950kv, the setsp suggestion as below for reference
Posted by Catherine Chen | Jul 06, 2020 @ 10:12 PM | 6,734 Views
Hello Everyone,

QS8+Antispark Connector Cable Male and Female with Cable.

Describe:
Connector:QS8+
Cable:6AWG,3430/0.08
Cable length:Customizable
Use:Vehicles,Remote Control Toys
Please contact:[email protected]

Best Regards,
Catherine

Dongguan QS Electronic Tech Co.,Ltd
www.qsrccn-hobbies.com www.qiangshui.en.alibaba.com
M 86 134 80010457 P 86 (0) 769 84750417 Skype chenmin19911 Email [email protected]...Continue Reading
Posted by Catherine Chen | Jul 06, 2020 @ 09:35 PM | 6,076 Views
Hello Everyone,

Wish you have a nice day!

This is Catherine from Dongguan QS Electronic Tech Co.,Ltd.

This time we want to share with you our 2S High Current Charge Cable with 4mm&5mm Solid Bullet connector, of course , we also have many more cable , connector and we accept OEM and ODM, Welcome to contact with me. thank you!

Best Regards,
Catherine
Posted by C_H_C | Jul 06, 2020 @ 08:18 PM | 5,828 Views
ZIP file created on a Mac.....
Posted by old4570 | Jul 06, 2020 @ 07:14 PM | 7,001 Views


The fuselage is prinTED and I have mixed feelings about it .

Fuse 01 = 26.8 grams ..
A) Came out of the printer OK , looks ok ! The tabs used for joining Fuse 01 to Fuse 02 are fragile and under engineered . Pictured is carbon rod re-enforcement . The bottom tabs have already broken off . Fuse 01 is strong , really strong .
B) There are certain design flaws aside from the weak joining tabs . The motor .. Has to go in before you glue the fuse and then what ? If the screws come lose how do you tighten them after assembly ? Obviously you need to break the damned thing .
C) Weight . Cant get past the fact that there is a lot of weight here for good or bad .

Fuse 02 = 17.7 grams
A) Little to complain about here , possibly the best thought out part

Fuse 03 = 18 grams
A) Seriously strong , possibly overly engineered and heavy for it's size .

Fuse 04 = 20.3 grams
A) Porky Pig .. Again I think over engineered and seriously over weight .
B) The joining tab is way short , this is a design flaw ( in my opinion ) and creates a weak point .
C) ???? I dont know about the tail section ...

Over all , it's probably the most refined model out there for free . ( Printable ) But if we do the maths
26.8 + 17.7 + 18 + 20.3 = 82.8 grams ..

And thats just the Fuse ...
I dont think I have a motor that can fit and pull a house brick at the moment .
Sort of Ho humming continuing , but I think I have to ..
Pictured = I fitted a small motor and folding prop , but they only do about 150 grams thrust as a combo .
To fly this safely , I would assume at least a minimum of 250 grams of thrust ..
If this really has a projected weight of 450 grams .. Thats a lot of weight .
I think you want it a lot lighter than that . But you may need a lot of motor to compensate for the heavy ass on this plane ( CG )


Posted by jmxp69 | Jul 06, 2020 @ 06:16 PM | 4,891 Views
This is the http://rcvideoreviews.com maiden flight of the Precision Aerobatics Katana MX. Unfortunately, the maiden got cut short due to weather, but hey at least I know it flies.

PA Katana MX [KMX] Maiden Flight - Precision Aerobatics (6 min 47 sec)

Posted by marksp | Jul 06, 2020 @ 04:19 PM | 5,360 Views
If you're fan of Tundra/Bush plane/STOL scale flying, you may be wondering about various tire/wheel sizing & weight. What follows is a summary of some of the tires that I've tested to date.

For context, here are the full scale Alaskan Bushwheel options and the corresponding scale measurements

Posted by GBLynden | Jul 06, 2020 @ 04:14 PM | 5,488 Views
This is a faster flight with the E-flite UMX Citation Longitude Twin 30mm BNF Basic EDF Jet.

E-flite UMX Citation Longitude Twin 30mm EDF BNF Basic Faster Flight (5 min 29 sec)

Posted by BAF23 | Jul 06, 2020 @ 11:02 AM | 5,980 Views
First steps in 2014

Pic 5660cr


After flying indoor toy helicopters for a while I desired to purchase a serious secondhand helo to fly outdoors. Jan 2014 my eyes fell on an electro scale Hugues 500E in unattractive Danish Army colors, completely ready to fly and equipped with a Helicommand Rigid ground and air stabilizer, plus five 6S3300 batteries. I trusted that my skills with the Blade 120 and like, augmented by the quality stability system, would be sufficient to get it in the air to teach myself. The deal was concluded and after coming home I knew the first thing I wanted to do was to transvestite it into the colors of the famous Hugues 500D that was used in every episode op the worldwide popular eighties television series: Magnum. As painting gloss yellow over matte dark green would be very difficult, I opted to cover it in vinyl and purchased lengths of yellow, orange and brown. I couldnt refrain from first making a picture of my acquisition next to a Blade 130X helicopter that I hand-painted as a German police BO105 instead of the omnipresent Red-bull dress-up.

Pic 2014-5


I quickly regretted my decision to work with vinyl, applying parallel angled stripes shoulder to shoulder over angled and double-curved surfaces proved very challenging but I never gave up. In the end I started by first using see-through paper that I pushed in place hugging the surfaces, then marked where the previous strip ended, put the paper flat on the table and drew a new...Continue Reading