Old_Pilot's blog View Details
Posted by Old_Pilot | Oct 25, 2020 @ 02:15 PM | 3,672 Views
In homage to Rusty-Gunn, I modified his original design (the Jimi Jetstream) to accept a 70mm EDF !

This is my way of saying thank you for so many wonderful designs over the years..Best wishes to Rusty

Note, the Jimi Jetstream was the first foamie I ever built....started me down the flat jet road......

30" WS 50% KFM-2 wing
70mm Powerfun 12 blade fan
3400 kv motor
80 Amp ESC
3300 mah 50C 4 cell
19 gram MG servos
Lemon 6 channel receiver with satellite
The nacelle is a 22 oz plastic stadium cup
Airframe is 3/16" Elmers board

Weather will have to get better before I maiden her
Posted by Old_Pilot | Oct 25, 2020 @ 08:15 AM | 2,071 Views
Already thinking about the next build....built this one back in 2014 with twin 64 mm fans....I'm thinking twin 70's this time
Posted by Old_Pilot | Oct 23, 2020 @ 06:00 PM | 4,747 Views
I had a mischief of a time unfolding the canopy for the Jetstream......I finally modeled the thing using 3D faces and unfolded each face using point-to-point projection.....I test cut the canopy out of heavy card stock, just to make sure
Posted by Old_Pilot | Oct 18, 2020 @ 09:45 AM | 4,063 Views
Messing around with an old design....30" Jetstream with a 70mm fan...based on the Jimi and Judi Jetstream....the originals were prop-in-slot, and excellent flyers designed by Rusty-Gunn (RC Groups).....unfolding the canopy for the fan mount was a witch.......

As a side note, the Jetstream was the first foamie I ever built....many thanks
Posted by Old_Pilot | Oct 15, 2020 @ 09:56 AM | 2,263 Views
The attached video was sent to me by a middle school teacher in Cologne, Germany.......he converted my Einzpfeil flat jet into a catapult launched glider as part of one of his workshop projects with the kids....what better way to be introduced to the dynamics of flight than to experiment with an easy to build glider...

Probably the nicest compliment I've ever received with regards to one of my airframes

Now to go deflate my head.....LOL

Einzpfeil catapult glider (1 min 21 sec)

Posted by Old_Pilot | Oct 11, 2020 @ 09:13 AM | 2,036 Views
Just finished this one.......with the new fan and nacelle.....will maiden when the weather clears

27" WS, 12 blade 70 mm fan, 22oz stadium cup nacelle (fits perfectly) 19 gr servos, 80 amp ESC, 3300mah 60C 4S battery, Lemon 6 channel receiver

33 ounces all up weight....64ounces of measured thrust
Posted by Old_Pilot | Sep 12, 2020 @ 11:43 AM | 1,758 Views
It was SPECTACULAR !....She was flying just fine, so I decided to open the throttles......and then....the fans quit, lots of smoke trails, and in she went...First thoughts are that two high amp draw fans and one high C (60C) battery are OK...until you try to push that much amperage through one Deans plug....pretty sure that's where the fire started..looks like I let the smoke out of everything....total loss...but it was worth watching the crash !..........LOL
Posted by Old_Pilot | Sep 03, 2020 @ 06:54 AM | 5,053 Views
This one looked like it had promise....until I checked the nacelles......not gonna waste material

Well SNUFF !......I've hit a snag,,a big snag....In its current configuration, there's not enough area at the nacelle inlets to satisfy the fan sweep area.....one thing I've learned about these fans.....I need to provide 100-125% inlet area, so the fan doesn't waste any energy just trying to get air to the rotor blades..in this case, I'm only providing about 70% of inlet area....long story short, the fans will starve at the inlet....

If you limit the amount of air going in, you reduce the amount of air going out......now you see why all my jets have nacelles that are external of the fuselage...e.g. the S-3, the SU-25, the A-9, and the modified CF-105
Posted by Old_Pilot | Aug 27, 2020 @ 01:11 PM | 6,993 Views
Northrop YA-9A....Flight ready

48" WS. (2) 12 blade 70mm fans, 3400 kv motors, 80 Amp ESC's,
5000 mah 60C 4 cell battery, 63 ounces all up, almost 8 lbs of thrust (measured),
50% KFM-2 wing.

"Laura" will prevent a maiden anytime soon....will post video if successful

Flight Surfaces are 3/16" Elmers Board
Fuselage is cut from 1/2" pink rigid insulation
Nacelles are cut from 2" pink rigid insulation
Posted by Old_Pilot | Aug 07, 2020 @ 06:16 AM | 5,924 Views
Finally got this one sorted electronically..gonna try to maiden her this morning......video if successful
Posted by Old_Pilot | Jul 26, 2020 @ 02:31 PM | 7,261 Views
Progress has been slow, but I'm getting closer...still fiddling with how to secure the wing, given the thrust to weight ratio....but I'm getting to the short rows...control horns and push rods..

She'll fly pretty soon....all up weight will be right at 3 1/2 lbs, but the new fans will generate almost 8 lbs of measured thrust....she ought to be a bullet
Posted by Old_Pilot | Jul 22, 2020 @ 05:40 AM | 4,822 Views
I've had to change the fan for my 70 mm flat jets to this one.


it's a little bigger than the ones I'd been buying and no longer fits the original coffee cup nacelle...so I needed to find a new nacelle cup....this is a 22 oz plastic drink cup that fit's perfectly ! They are referred to as "Stadium Cups"
Posted by Old_Pilot | Jun 14, 2020 @ 07:29 PM | 4,269 Views
Apparently there wasn't a nickname for the YA-9.....I'm calling it the "Grunt"

Got a bit more done.....still a ways to go though
Posted by Old_Pilot | Jun 08, 2020 @ 10:57 AM | 3,960 Views
Greetings all,

Most of my larger fuselages are cut from "1/2 nominal" pink Formular.....Unfortunately that "1/2" ranges from between 0.55 to 0.60 inches...so I decided to make a hotwire slab cutter for true 1/2" (12.2 mm) foam....

A piece of ply, some 1/2" square dowels, a couple of machine screws, some washers, knurled knobs, and a couple of stout die springs
Posted by Old_Pilot | Jun 06, 2020 @ 07:18 AM | 5,223 Views
Maiden didn't end well...she took off in trim, and I was flying her around at about half throttle, making sure of input response....no bad habits, good roll rate....then I decided to open the throttles all the way, and WHAM, the port ESC/EDF shut down...and she cartwheeled into the runway...broke her all to pieces. I knew I was at the upper limit of the ESC's (65 amp)....Obviously, I was too close....If I'd been 3 mistakes high, I probably could have saved her. As it was I about 10 feet off the ground at close to 80 mph.....Pretty good size debris field....it was spectacular !

Oh well, I'll build her again
Posted by Old_Pilot | Jun 01, 2020 @ 05:29 AM | 9,467 Views
Finally got to maiden her...still have a bit of flight surface tweaking to do, but the dead stick glide is perfect......

Das Ugly Cub (2 min 33 sec)

Posted by Old_Pilot | May 26, 2020 @ 05:47 AM | 15,303 Views
The Sr-81 was a disaster......only because I'd neglected to do routine maintenance on my CNC machine....nothing fit....so,

Back to tried and true methods......I found a 2-off from the early 1970's......the Northrop YA-9, which lost the competition to the A-10.
First blush is a 48" span with twin 70's (y'all know how I like my twins).

Generating the parts, pieces, templates today..will cut it out this week
Posted by Old_Pilot | Apr 25, 2020 @ 09:48 AM | 6,996 Views
Preliminary model

30" WS x 48" OAL.. twin 70's
Posted by Old_Pilot | Apr 23, 2020 @ 01:25 PM | 8,310 Views
30" WS x 48" OAL with twin 70's
Posted by Old_Pilot | Apr 20, 2020 @ 03:21 PM | 8,802 Views
Das Ugly Cub..down to push rods, control horns, and programming...still working on the graphics, but for all intents, she's done