Taranis X-lite First Impressions (4 min 9 sec)

Hello everyone welcome back.

In today's video I will be trying out the new Taranis X-lite. This is my first impression of the transmitter. So far this has been an awesome companion to my fpv arsenal. I love how light and small it is. The build quality is impressive and the over all look and feel is great.

Interested in picking up the Taranis X-lite? Take a look at the affiliate link below. Affiliate links help me earn a small commission which in turn helps fund my channel and keep me going. Affiliate links are of no cost to you. Thank you for your support.

https://amzn.to/2NGfVlc

Beta65s Color & Designer Frames (1 min 10 sec)

Hello everyone welcome back.

Huge thank you to Dronsta for this opportunity. You can now buy the color and designer beta65s frames at www.craytechblog.com/shop


Specifications:
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Yellow, Green
Propeller: 3-blades 31mm props (Not including)

https://www.craytechblog.com/product...signer-frames/


What I fly and what I use



BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

Hawkeye Firefly HD 1080P FPV Micro Action Camera (1 min 53 sec)

Here is a quick peak at the Hawkeye FireFly HD 1080p Micro Action Camera. For the price, weight and form factor I'm impressed. Let me know what you think?

Specifications:
Image Sensor: 2MP
Color: Black
Video Resolution: 1080P 30fps / 720p 30fps
Video Record Format; MJPG
Lens: 160 Degree
AV out: YES
Storage Card: 8G--32G
Battery Capacity: 200MAH
Battery life: 1 Hour
Charge Port: 230mAh
Size: 24*24*32mm
Weight: 14g

Package Including
1 * USB/AV cable
1 * FPV bracket
1 * Sports bracket

I have a feeling this is going to be a great solution for HD on my micro quads.

Pick one up today.
https://amzn.to/2kbYZFr


Quad used to carry this camera.
http://hobbycool.com/awesome-mini-bobi-x115/?afmc=2g



What I fly and what I use



BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

C Ray Tech's RC Hovercraft (10 min 5 sec)

Hello everybody welcome back.

In todays video I am very excited to show you the C Ray Tech Hovercraft. I recently took a trip into the world of Tiny Whoovers, Tiny Whoov, Tiny Hovercrafts which ever you prefer. I fell in love all over again with FPV. I am very proud. This is a 3d printed frame that provides semi push fit assembly. I have models available for brushed motors ranging from 6-8.5mm




I will be offering a pre order very soon so stay tuned. You will have the option of pre ordering a frame or a full kit.

If you are interested please contact me via my contact page

www.craytechblog.com/contact


Thank you very much for watching

Stay tuned for future videos by subscribing and clicking the bell.

If you like my channel and would like to donate to help support future videos you can visit the following links.

https://www.patreon.com/C_Ray_Tech

www.craytechblog.com/shop


Thank you very much.

Scoot Safe & Scoot Often

BetaFPV Lite Flight Controller Giveaway (1 min 29 sec)

Hello everyone welcome back.

Im excited to giveaway two of the BetaFPV Lite Flight controllers.

To enter please visit the video on youtube and leave a comment. Be sure to subscribe and click the bell for future content notifications.

Here are the specs on the Flight controller

SPECIFICATIONS
CPU: STM32F030
Six-Axis: MPU6050
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Silverware firmware
Receiver: Bayang protocol
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 2.5g


Want one right now?

https://amzn.to/2uxLurO

https://betafpv.com/products/betafpv...ght-controller

Thank you very much for watching. I really appreciate it.




Fly Safe & Fly Often.

AwesomeFPV's Bobi 115 (3 min 24 sec)

Hello everyone welcome back.

In todays video I wanted to show you and review the AwesomeFPV Bobi 115mm Brushless quadcopter.

This little 2.5" micro brushless quadcopter is a ton of fun to fly. It has a great tune out of the box and all you need to do is install your favorite receiver and you are good to go. I would like to see a better camera on future models as both the camera quality and VTX range was below my expectations.

Huge thank you to Hobbycool.com for sending this over. This post contains affiliate links. Affiliate links help me earn a commission that supports my channel and are of no cost to you.

You can pick up the bobi 115 at hobbycool.com

http://hobbycool.com/awesome-mini-bobi-x115/?afmc=2g

Specifications:
Wheelbase: 115mm
Body size: 100 x 100 x 38mm ( not including propellers )
Frame material: 3K carbon fiber
Brushless motor: 1105 7000KV
Brushless ESC: 4-in-1 BLHeli - S 10A
Flight controller: OMNIBUS F3 with OSD, 5.8G VTX
Video transmitter: 5.8G 48CH 25mW
Image transmission range: about 250m
FPV camera: 600TVL CMOS
Propeller: 2535 2.5 inch
Battery: 500mAh 7.4V 2S 25C LiPo

OMNIBUS F3 Flight Controller
CPU: STM32F303 MCU
IMU: MPU6000
BEC output: 5V 1A
OSD: BetaFlight OSD

4-in-1 Brushless ESC
Processor: EFM8BB2
Driver: 3-in-1 MOSFET
Firmware: BLHeli - S
Continuous current: 4 x 10A

Note:
The color ( red, black and white ) of the propellers will be sent randomly.


Also be sure to check out the hobbymate lipo bag deal going on on amazon.

Hobbymate Lipo Bag Deal (1 min 59 sec)

Thank you very much for watching.

Remember to Like, Share & Subscribe. You can click the bell for notifications.

If you like my channel and would like to donate to help support future videos you can visit the following links.

https://www.patreon.com/C_Ray_Tech

www.craytechblog.com/shop


Thank you very much.

Fly Safe & Fly Often

Hobbymate 145mm FPV Racing Kit (9 min 23 sec)

Hello everyone welcome back.

First I would like to say thank you to HobbyMate for sending this over for me to review. This post contains affiliate links. Affiliate links help me earn a commission that support my channel and are of not cost to you.


You can pick up this kit at Hobbycool.com

http://hobbycool.com/micro-fpv-racin...f-pnp/?afmc=2k


Weight came out to 148grams


Specification:
Frame Size: 145mm
Prop Size: 3.0″
Carbon Fiber bottom plate: 4mm
Carbon Fiber top plate: 1.5mm
Carbon Fiber camera mounting plates: 1.5mm
FC mounting hole size: 30.5x30.5mm
Frame Standoffs: 30mm
Micro Camera
Detachable arms
Frame Weight: 40gm

Configuration:
145 frame kit
Hobbymate F3 aio flight controller w/ vtx
Hobbymate 4in1 esc 20A
Micro fpv camera
3030 Tri-blade prop
Motor option: 1306 Brushless motors / 1406 Motors
Micro receiver optional

Specs for flight controller
Firmware Omnibus v3.17
Integrated with 40 channels switchable power
25mw/200mw/500mw, with on/off switch
Led display the channels and transmitter power
Support Audio and Video input (Audio input works only with cameras with mic)
Onboard 5V/3A BEC
Support 4-in-1 esc, and stand alone esc's
Support 2-6S (7-24v)power supply
Support buzzer (not included)
Support SBUS/PPM/DSM2/DSMX receivers, support osd
Program by radio control.


Spec:
F3 processor STM32F303CCT6
MPU: MPU6000 Gyro/ACC Sensor
AV...Continue Reading

Hobbymate Lipo Bag Deal (1 min 59 sec)

Hello everyone welcome back.

In todays video I wanted to tell you all about a great deal on fire and explosion safe lipo bags. Go ahead and head over to amazon to check it out. Right now if you buy a medium lipo bag and use the promo code HBLIPOBAG you will receive a free mini lipo bag.


Hobbymate Medium Lipo Bag
http://amzn.to/2pxRMmy

Mini Lipo bag
http://amzn.to/2pyZvR3



Check out this great video of the lipo bag in action.

Hobbymate Lipo Safety Bag Review and Test (14 min 30 sec)

...Continue Reading

Hobbycool.com SJ RG01 FPv Goggle Giveaway End 03/31/18 (2 min 1 sec)

Hello everyone welcome back!

Im excited to announce that Hobbycool.com would like to giveaway a pair of the SJ RG01 FPV Goggles.

To enter the giveaway simply like and leave a comment on this video. The winner will be drawn on March 31st.

Please share this video on your social media accounts!! Lets make this big!

Thank you for watching and good luck!!

Specification:
Input power: DC 6-28V, DC12V/380 mA, maximum charge current: 300 mA
Display resolution (dual display): 960 x 240
AV output terminal: Ф3.5mm, video output impedance: 75, audio output impedance: 10 k
DC socket for input power: diameter: 6mm, inner pin diameter: 2.1mm
Class of the TF card: class 10, maximum size of the TF card: 32 Gb
Micro USB interfaces allow convenient file saving
Optional battery: 3.7V/1500 mAh, 80mm x 19mm x 7mm (L x W x H)
Adjustable sight distance: min. value: 58mm, max. value: 63mm
Product size: 175mm x 102mm x 68mm (L x W x H)
Total weight: 278g

Features:
Dual display with a resolution of 960×240
Automatic channel scanning
Adjustable interpupillary distance(58-63mm)
Double receiver modules ensure stable image quality
Compatible with universal 5.8GHz band emitter
Supports real-time video recording using 32G TF card
Attractive appearance,comfortable wearing experience

Package included:
1 x HBRG01 Goggles
2 x Antenna
1 x Power cable
1 x AV cord
1 x Battery (1,500mAh)...Continue Reading

Awesome FPV's F100 Brushless Micro (2 min 59 sec)

Hello everybody welcome back.

In today's video I will be showing you the Awesome FPV's F100 !00mm Brushless Micro Quadcopter. I had been very impressed with this PNP drone. It packs all the punch necessary to have a great time flying. I was able to fly acro freestyle with no issues.

Specification:
Brand name: AWESOME
Item model: MINI F100
Wheelbase: 100mm
Wing length: 60mm
Motor: 1103 7500KV
ESC: 10A Blheli_S
Flight controller: Omnibus F3
Propeller: 2035
FPV Transmitter: 5.8G 25MW 48CH
Camera: 600TVL
Color: Black / white
Body size: 85x100x38mm
Weight(without battery): 47g
Package weight: 220g

Package Included:
1 X MINI F100 FPV Racing Drone
4 X Propeller (2XCW 2XCCW)
1 X 2S 500mAh 25C Lipo battery

Would you like to see some Flight Footage?

Take a look at this video showcasing the Bobi 115 and the F100.

Taking the Awesome FPV Bobi and F100 for a spin (13 min 29 sec)

...Continue Reading

SJ RG01 FPV Goggles (9 min 23 sec)

Hello everyone welcome back.

In todays video I will be reviewing and showing you the new SJ RG01 FPV Goggles. These are a fantastic middle ground between your fatshark style and box style goggle. They had all the bells and whistles that you will need to have a great time flying FPV.



Specification:
Input power: DC 6-28V, DC12V/380 mA, maximum charge current: 300 mA
Display resolution (dual display): 960 x 240
AV output terminal: Ф3.5mm, video output impedance: 75, audio output impedance: 10 k
DC socket for input power: diameter: 6mm, inner pin diameter: 2.1mm
Class of the TF card: class 10, maximum size of the TF card: 32 Gb
Micro USB interfaces allow convenient file saving
Optional battery: 3.7V/1500 mAh, 80mm x 19mm x 7mm (L x W x H)
Adjustable sight distance: min. value: 58mm, max. value: 63mm
Product size: 175mm x 102mm x 68mm (L x W x H)
Total weight: 278g

Features:
Dual display with a resolution of 960×240
Automatic channel scanning
Adjustable interpupillary distance(58-63mm)
Double receiver modules ensure stable image quality
Compatible with universal 5.8GHz band emitter
Supports real-time video recording using 32G TF card
Attractive appearance,comfortable wearing experience

Package included:
1 x HBRG01 Goggles
2 x Antenna
1 x Power cable
1 x AV cord
1 x Battery (1,500mAh)
1 x User’s manual


These goggles were sent over to be for review my hobbycool.com This video post contains affiliate links. Affiliate links help me earn a commission to support my site and channel. They are of no cost to you. Thank you for your support.

You can find these FPV goggles at Hobbycool.com

http://hobbycool.com/5-8g-48ch-dual-...ggles/?afmc=2e


If you would like to see DVR footage check out this video.

BetaFPV Beta65s Lite Outdoor Flight (3 min 52 sec)

Link to the Turnigy review by HotSauceFinalBoss

Taranis QX7 + Goggles Case - DailyDVR (7 min 12 sec)

Link to Turnigy case
http://amzn.to/2trT1Ib

Setting up Your BetaFPV Beta 65s Lite with the Taranis QX7 (6 min 29 sec)

Hello everyone welcome back.

In today's video I will be showing you how to bind your new BetaFPV Beta 65s Lite running Bayang Protocol to your Taranis using the MTX-9D Module. This was a really easy setup and I also included the needed stick gestures to change your PIDS and Flight modes.

Here are the instructions to set up your profile.

Binding Procedure
1. Create a model in OpenTX using external module in PPM mode, 12 channels and AETR
sequence order. 2. Turn off Taranis. 3. Power up quad. 4. While holding the appropriate stick pattern listed below, power up Taranis.

To Bind you will need to have you left stick in the center and down position. On your Right stick you will have it held to Elevator up + Aileron right when you power on your transmitter. THis will bind your Beta 65s lite to your Taranis. You will notice that your rapidly blinking lights have now changed to solid. You are now ready to fly.


This little guy also rocks silverware out of the box.

Pick up a BetaFPV Beta65s Lite today
https://betafpv.com/products/beta65s...oop-quadcopter

Pick up a MTX-X9D Module
http://amzn.to/2FM8XHF



Dont forget to check out C Ray Prints.
https://www.youtube.com/channel/UCmS...NXnBS9ExYSIBsg


What I fly and what I use



BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

Taking the Awesome FPV Bobi and F100 for a spin (13 min 29 sec)

Hello everybody welcome back.

In today's video I had the pleasure of taking out the two new quads by Awesome FPV sent over by Hobbycool.com

I had a blast both of these 2" quads are a great time to fly. They pack plenty of power on 2s and the stock tune for me was very nice.

Thank you Hobbymate for sending all of this over.

Hobbycool has an affiliate program. Affiliate programs help me earn a commission that supports my channel. They are of no cost to you. Thank you for your support.

Check out Hobbymate on Amazon
http://amzn.to/2GBreGM

Check out Hobbycool.com
http://lddy.no/2nkh

Products seen in this video.

Awesome Bobi 115mm
http://hobbycool.com/awesome-mini-bobi-x115/

Awesome F100
http://hobbycool.com/awesome-mini-f1...cing-rc-drone/



Links to batteries I used

BetaFPV 450mah 2s
http://amzn.to/2GL5UPd

BetaFPV 600mah 2s
http://amzn.to/2orlbxQ

Hobbycool Haul Micro Quads FPV Goggles and more! (10 min 6 sec)

Hello everyone welcome back.

In today's video I will be doing some unboxing of products sent over to me by www.hobbycool.com you may also know them as hobbymate.com

Thank you Hobbymate for sending all of this over.

Hobbycool has an affiliate program. Affiliate programs help me earn a commission that supports my channel. They are of no cost to you. Thank you for your support.

Check out Hobbycool.com
http://lddy.no/2nkh

Products seen in this video.

Awesome Bobi 115mm
http://hobbycool.com/awesome-mini-bobi-x115/

Awesome F100
http://hobbycool.com/awesome-mini-f1...cing-rc-drone/

Hobbymate 145mm Micro FPV Racing Drone Kit
http://hobbycool.com/micro-fpv-racin...e-combo-145mm/

HakRC Stack
http://hobbycool.com/hakrc-mini-flyt...-in-1-20a-esc/

FPV Goggles
http://hobbycool.com/5-8g-48ch-dual-...video-goggles/

BetaFPV Beta65s Lite (8 min 34 sec)

Hello everyone welcome back

In todays video I will be showing you and reviewing the BetaFPV Beta65s Lite. This is a awesome budget micro that is great for both beginners and pros a like.

Check out the specs
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV Lite Brushed Flight Controller
Motor: 7x16mm Coreless Brush Motor, 17500KV
Receiver: Bayang protocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Batterry: 3.7V 260mAh Lipo battery
Flight time: 3 minute

This little guy also rocks silverware out of the box.

Pick up a BetaFPV Beta65s Lite today
https://betafpv.com/products/beta65s...oop-quadcopter



Dont forget to check out C Ray Prints.
https://www.youtube.com/channel/UCmS...NXnBS9ExYSIBsg


What I fly and what I use
This post contains affiliate links. Affiliate links help support my channel and are of no cost to you.


BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

BetaFPV Beta75Pro BetaFPVs Brushless Indoor Powerhouse (5 min 18 sec)

Hello everyone welcome back.

What a great day today is. The beta75 pro has finally arrived. BetaFPV has hit it out of the park again with another awesome easy to build and easy to fly out of the box micro. Huge thank you to BetaFPV for sending this little guy over. With the plug in play motors its one step closer to being the best beginners brushless ducted micro out.

Betaflight setup was a breeze make sure you check out my videos on subtrims and setup.

Here are the specs
Frame Wheelbase: 75mm
Propeller: 40mm 4-blades propellers
Motors: 0703 15000KV
Fligh Controller: BETAFPV F3 1S brushless FC with Betaflight OSD integrated
Firmware version: betaflight_3.2.0_OMNIBUS
ESC: 5A BLHeli ESC (integrated with FC)
Camera & VTX: Z01 25mW AIO VTX camera
Battery: 550mAh Lipo HV Battery
Receiver: Frsky XM Rx (support D8 & D16) / Micro DSMX Rx / Futaba S-FHSS Rx
Weight: 28g (without battery)
Flight time: 4 minutes with 550mAh HV battery

Need some more batteries?
http://amzn.to/2DVcXXU

Stay tuned for some flight footage.

What I fly and what I use



BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

I have to say I'm very impressed with the BetaFPV Beta 85. It's got so much power and is just a blast to fly.

Movin and Groovin with the BetaFPV Beta85 (2 min 0 sec)

Hello everyone welcome back.

Took Papa Smurf out for some freestyle acro. I really believe with the right tune this bad boy will be a awesome freestyle acro trainer. I must have crashed it into everything I could find. Only ended up cracking a canopy.

Huge thank you to BetaFPV for sending this over.

SPECIFICATION
Wheelbase: 85mm
Weight: 43g (without battery)
Flight Controller: BETAFPV Brushed FC with OSD
Firmware Version: Betaflight BETAFLIGHTF3 3.2.0
Motor: 8.5x20mm coreless brushed motor, 16000KV
Receiver: Frsky D8 potocol / DSMX / Flysky Rx with AFHDS 2A protocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 48CH
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 minutes
ASSEMBLY PARTS LIST
Frame: Beta85 frame
Motors: 8.5x20mm 16000KV motors
Props: 48mm 3-blade props
FC: BETAFPV F3 FC with OSD (According to different Rx version)
AIO camera: Z01 Camera
Battery: 550mAh LiHV battery

Pick up the Beta 85

BetaFPV.com
https://betafpv.com/products/beta85-...oop-quadcopter

Amazon.com
http://amzn.to/2DuKEiM

Link to more 550mah BetaFPV LiHV Batteries
http://amzn.to/2mSgThv

Link to BetaFPV Z01 Camera fix
https://www.facebook.com/groups/tiny...6883072866030/

What I fly and what I use

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

BetaFPV Beta 85 (5 min 27 sec)

Hello everyone welcome back.

In todays video I will be showing you the BetaFPV Beta 85. Im calling it Papa Smurf. This a big jump from the Beta 65. Here are all the specs on the build and what you get.

SPECIFICATION
Wheelbase: 85mm
Weight: 43g (without battery)
Flight Controller: BETAFPV Brushed FC with OSD
Firmware Version: Betaflight BETAFLIGHTF3 3.2.0
Motor: 8.5x20mm coreless brushed motor, 16000KV
Receiver: Frsky D8 potocol / DSMX / Flysky Rx with AFHDS 2A protocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 48CH
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 minutes
ASSEMBLY PARTS LIST
Frame: Beta85 frame
Motors: 8.5x20mm 16000KV motors
Props: 48mm 3-blade props
FC: BETAFPV F3 FC with OSD (According to different Rx version)
AIO camera: Z01 Camera
Battery: 550mAh LiHV battery

Pick up the Beta 85

BetaFPV.com
https://betafpv.com/products/beta85-...oop-quadcopter

Amazon.com
http://amzn.to/2DuKEiM

Link to more 550mah BetaFPV LiHV Batteries
http://amzn.to/2mSgThv

Link to BetaFPV Z01 Camera fix
https://www.facebook.com/groups/tiny...6883072866030/

What I fly and what I use

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl


BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you for watching!

Fly Safe & Fly Often

GriffonFPV 8CH FrSky Mirco Receiver It's Tiny! (2 min 42 sec)

Hello everyone welcome back.

In today's video im excited to show you the GriffonFPV FrSky Micro Receiver. This little guy is tiny. at only .7 grams this can be used on any micro.

Here are the full specs and binding procedure.

Mode: FrSky D8

Channels: 8

Output signal: SBUS

Input voltage: 5V

Input current: 25mA at 5V

size : 15mmx12mm

Receive distance: more than 500m

Weight: 0.7g ( including antenna )


How to Bind:
Take the X9D transmitter for an example:
1. Select D8 Mode, press "Bind" on the receiver, supply power for it, the LED will turn solid .
2. Choose Bind Mode of the transmitter, the LED will turn off, indicating binding successfully. Exit the Bind Mode.
3. Restart the receiver. LED solid - normal; flashing - loss of signal or failure in binding.

Pick one up at nwareno.com

http://nwareno.blogspot.com/p/nwa-ev...egory=26401124

Check out my video on the GriffonFPV Brushless Ghetto Bird

Griffon FPV Brushless Ghetto Bird (5 min 22 sec)

...Continue Reading

Griffon FPV Brushless Ghetto Bird (5 min 22 sec)

Hello everyone welcome back!!!

Im very excited about todays video. In this video I will be reviewing the Griffon FPV Brushless Ghetto Bird kit. This was a fun and relatively easy build. All the specs are listed below. This little guy is fast and has a ton of power. It was a ton of fun flying indoors. I cant wait to try it outside. So stay tuned. I recommend you stop by nwareno.blogspot.com and check it out.


Link to check out the Ghetto Bird
https://nwareno.blogspot.com/p/nwa-e...egory=26401097

Link to Clear BetaFPV Canopy
http://amzn.to/2qu3FMV



- This build allows you to choose without or connect a suitable serial receiver such as DSM2 DSMX for JR, SPEKTRUM, WALKERA Transmitter or Frsky for FRSKY Transmitter.
- Flight time: (1S) 2-3 minutes, (2S) 3-5 minutes
- Weight (depends setup below, without FPV Camera):
1S: Without Receiver 18.43(g), FRSKY Receiver 19.39(g), DSM2 DSMX Receiver 19.23(g)
2S: Without Receiver 19.08(g), FRSKY Receiver 20.03(g), DSM2 DSMX Receiver 19.90(g)

Package Included:
1 x Rakonheli 1S or 2S 66mm Brushless Whoop Kit (included hardwares)
1 x Brushless FC
1 x 5A BB2 48MHz DSHOT600 1-2S 4in1 ESC (SKU: FPV-0252-S)
1 x 31mm 3 Blade Transparent Propeller (2CW+2CCW; 1.0mm Shaft)
1 x FPV Camera Connector: 1.25 JST (15mm cable)
Receiver (one of these):
1 x 0.8g 2.4G DSM2 DSMX Pro Receiver for JR SPEKTRUM Transmitter (SKU: R0.8DSM2X)
1 x 0.9g 8CH Micro Receiver with SBUS PPM Output Binding Button for FRSKY Transmitter
Motors (one of these):
1S: 4 x GriffonFPV D0603 12000KV 1-2S Racing Brushless Motor (1.0mm Shaft)

Battery Connector: JST-PH-2.0 and included spare connectors


Thank you for watching!!