UnknownForces RC's blog View Details
Posted by UnknownForces RC | Aug 15, 2019 @ 10:48 PM | 450 Views
UFRC 4WD REAR AXLE TRUCK (0 min 23 sec)


The axle effection of 4WD REAR AXLE TRUCK is very small.
Posted by UnknownForces RC | Aug 13, 2019 @ 09:58 PM | 286 Views
Headlights of 4WD REAR AXLE TRUCK (0 min 34 sec)


Headlight, Turn signal brake light,Brake light,strobe light
Posted by UnknownForces RC | Aug 13, 2019 @ 12:30 AM | 711 Views
UFRC 1:5 4WD REAR AXLE TRUCK (0 min 51 sec)


The metal part of the frame:
front gearbox , medium gearbox, rear axle part, Trailing arm, rear shock absorber, front shock absorber, steering and throttle servo arm, complete drive system (All gears, except the Limited Slip Differential , The gears in other gearboxes are purely processed by machine) , chassis, upward plate, front top chassis plate,medium gearbox bracket.
Posted by UnknownForces RC | Aug 12, 2019 @ 03:44 AM | 1,105 Views
scale authentic headlights of GX1 electric buggy 4WD (0 min 37 sec)


Headlight, Turn signal brake light,Brake light strobe light
Posted by UnknownForces RC | Aug 12, 2019 @ 02:36 AM | 765 Views
Axle effection of GX1 electric buggy 4WD (0 min 32 sec)


The axle effection of UFRC 1:5 4WD REAR AXLE TRUCK is very small.
Posted by UnknownForces RC | Aug 09, 2019 @ 12:10 AM | 573 Views
GX1 1:6 electric Brushless Buggy (0 min 13 sec)



The wheel hub has standard dimensions with 24 mm hex and 18 mm rim bore. All Losi, HPI, MadMax, GRP, MCD etc. wheels will fit on the UFRC Growler GX1 without conversions or adapters.
Posted by UnknownForces RC | Aug 07, 2019 @ 10:04 PM | 514 Views
Scale authentic lights system of GX1 4wd electric buggy (0 min 16 sec)


scale authentic headlights (Headlight, Turn signal brake light,Brake light strobe light, make night-driving a lot more enjoyable.
Posted by UnknownForces RC | Aug 07, 2019 @ 01:33 AM | 697 Views
Large capacity battery box of GX1 electric buggy 4wd (0 min 28 sec)


The battery box has large and captive quick closures. Fully enclosed with reinforcement strip batteries box. Improve structural strength and offer additional protection to your valuable batteries.
Posted by UnknownForces RC | Aug 05, 2019 @ 10:21 PM | 752 Views
GX1 electric buggy 4wd version (0 min 26 sec)


Receiver box harness adapter,it has five interfaces. Waterproof in one step,No need to open the receiver box frequently,Easy to connect to all kinds of electronic devices.
Posted by UnknownForces RC | Aug 02, 2019 @ 12:03 AM | 1,259 Views
GX1 electric buggy is testing its Perfect Trafficability (0 min 20 sec)


The more twisted, the better the Trafficability, such as the Wrangler, in the real car field is easier to pass the cross shaft.
Posted by UnknownForces RC | Aug 01, 2019 @ 10:14 PM | 1,275 Views
GX1 1:6 electric Brushless Buggy 4wd version (0 min 17 sec)


smooth running of drive system, 1:5 4WD REAR AXLE TRUCK is assembling
Posted by UnknownForces RC | Jul 31, 2019 @ 12:52 AM | 1,153 Views
Power system part of our UFRC 1:5 4WD REAR AXLE TRUCK.
Posted by UnknownForces RC | Jul 31, 2019 @ 12:51 AM | 1,127 Views
UFRC attended the Beijing Rc exhibition on April 20th, 2019
Posted by UnknownForces RC | Jul 24, 2019 @ 02:25 AM | 1,929 Views
Bent and milled tub chassis made of 5 mm thick aluminum for extreme rigidity.

Aluminum skid plate/chassis reinforcement for the front axle as standard.

Steel reinforcement plate for the chassis in the servo saver area as standard.

Machined connecting plates for the hinge pins with exchangeable plastic inserts as standard.

Front suspension with ball-raced balance beam for the shocks (can also be locked if required) for running on very uneven terrain.

The UFRC Growler GX1 has metal thread inserts in the plastic parts at high-stress mounting points.

Large-volume shock absorbers with oversized 8 mm piston rods.

Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.

Differential cup made of cold extruded aluminum, no fragile cast part!

Drive shafts with wheel-side CVD joint as in Losi 5ive vehicles. The drive pin on the diff side is also replaceable and has a diameter of 6 mm!

Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel

Front and rear spindles/uprights prepared for installation of in-wheel brakes.

Roll cage with spare wheel mount and additional protective railings for the roof panel.

Desert buggy design body panels made of clear polycarbonate.

Separate polycarbonate chassis protector.

Prepared for extensive LED lighting with reflectors for improved light output...
Posted by UnknownForces RC | Jul 23, 2019 @ 03:50 AM | 2,157 Views
The Growler GX1 is a 2WD large scale buggy with brushless drive. The vehicle is comparatively compact, its dimensions are similar to those of the 1/6 FG Marder. Therefore the car is easy to handle and transport. Nevertheless it has a battery box, which can even take 2x 4S batteries with 10000 mAh with ease. This allows long run times, although the model with its high-torque 680KV/5.5 kW motor has a lot of power. The standard 8S/200A speed controller comes from the renowned manufacturer ZTW.

If you’re still lurking for even more power: motor and gearbox have also been tested with 12S at UFRC, the battery box also offers enough space for 2x 6S. The Growler GX1's stainless steel ESC mounting bracket also offers space and hole pattern for the large 12S/300A ZTW Beast ESC. In order to keep up with this power in the long run, a heavy-duty version of some of transmission components is in developement.

The features of the Growler GX1 are impressive and prove that the UFRC Growler GX1 is an exceptional car. Also the parts’ dimensioning of the largest 1/5 cars was transferred into a 1/6 model at many points.

The wheel hub has standard dimensions with 24 mm hex and 18 mm rim bore. All Losi, HPI, MadMax, GRP, MCD etc. wheels will fit on the UFRC Growler GX1 without conversions or adapters.

Instead of aluminum wheel nuts with fine thread, the UFRC Growler GX1 uses normal M6 screws with countersunk head for wheel mounting. Strong and cheap to replace if necessary....Continue Reading
Posted by UnknownForces RC | Jul 19, 2019 @ 02:11 AM | 1,738 Views
GX1 2WD electric desert buggy 8S (0 min 17 sec)


GX1 2WD electric desert buggy 8S is the upgrade version of this our 1st version buggy was running on this video.
Posted by UnknownForces RC | Jul 17, 2019 @ 04:49 AM | 2,411 Views
GX1 electric desert buggy 4WD version has started to assemble and test, look forward to its monster power.