JohnCC's blog View Details
Archive for December, 2016
Posted by JohnCC | Dec 09, 2016 @ 04:09 AM | 38,109 Views
FuriBee F3 32-bit Brushed Flight Controller Build Blog Article!

http://www.gearbest.com/multi-rotor-...&lkid=10255906




This is a brand new product from GearBest for building your own micro quads. $23 for an F3 board. I'm going to be building a few tiny whoops using these parts from gearbest and will be blogging about my results here. This is a very, very great price and probably the cheapest F3 micro board you're going to find online right now. They have it in both DSMX and FrSky RX.

I'll be doing a build with this board soon, so watch this space!

Build Specifications

F3 FC Board: http://www.gearbest.com/multi-rotor-...&lkid=10255906
H36 Props: http://www.gearbest.com/rc-quadcopte...?lkid=10255897
F001 Camera Holder: http://www.gearbest.com/fpv-system/p...&lkid=10255898
Furibee F03 AIO camera: http://www.gearbest.com/fpv-system/p...&lkid=10255904
JJRC H36 frame: http://www.gearbest.com/rc-quadcopte...&lkid=10255905
Motors: 19,000kv Brushed

FuriBee F3 32-bit Brushed Flight Controller // FAST "Tiny Whoop" build! (12 min 54 sec)


The Build Adventure

1. Flashed betaflight by choosing SPRACING F3, BF 1.01, baud rate of 115200 with full chip erase selected. No bootloader shorting required.

2. Went to receiver -> changed AETR1234 to TAER1234 to fix the throttle being "wrong" for my X9D+ -- this will confuse the hell out of you if you try to set this up in either cleanflight or betaflight and you don't do this step. Both...Continue Reading