Archive for May, 2014
Posted by myrcmodel |
May 26, 2014 @ 04:50 AM | 8,915 Views
The AlexMos 32bit 3 Axis Brushless Gimbal Controller is available now.
http://www.hobby-wing.com/alexmos-32...ontroller.html
32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization. Allows camera control with the RC or analog joystick. Use several switchable profiles for different modes of operation Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus. Battery voltage monitoring, compensating voltage drop in the PID-regulator. Low battery alarm (output to 5V active buzzer). Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3. Can supply up to 1A current for external devices on the 5V power line. Dedicated UART-socket to connect optional Bluetooth module Reverse-polarity protection, overheat and overcurrent protection USB interface for the PC connection, to configure, control and upgrade firmware. Graphical user interface to manage the settings. Windows / OS X / Linux versions. Control through the Serial-protocol using dedicated API. Improved attitude estimation algorythms Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.
High Processing Power - Modern 32bit MCU ARM Cortex M4 72MHz for complex calculations
3-axes Stabilization - High-grade quality in versatile shooting conditions
Big connectivity - Support variety of RC protocols and controlling methods
Battery monitoring - Prevents battery over-discharge and compensates the voltage drop
Specification:
Size of the board: 50×50 mm Distance between the mounting holes: 45 mm Diameter of the mounting holes: 3 mm Power supply voltage: 8–25 V (3s-5s LiPo) Maximum motor current: 1,5 A 5V output current to power external devices: Up to 1 A
http://www.hobby-wing.com/alexmos-32...ontroller.html
32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization. Allows camera control with the RC or analog joystick. Use several switchable profiles for different modes of operation Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus. Battery voltage monitoring, compensating voltage drop in the PID-regulator. Low battery alarm (output to 5V active buzzer). Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3. Can supply up to 1A current for external devices on the 5V power line. Dedicated UART-socket to connect optional Bluetooth module Reverse-polarity protection, overheat and overcurrent protection USB interface for the PC connection, to configure, control and upgrade firmware. Graphical user interface to manage the settings. Windows / OS X / Linux versions. Control through the Serial-protocol using dedicated API. Improved attitude estimation algorythms Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.
High Processing Power - Modern 32bit MCU ARM Cortex M4 72MHz for complex calculations
3-axes Stabilization - High-grade quality in versatile shooting conditions
Big connectivity - Support variety of RC protocols and controlling methods
Battery monitoring - Prevents battery over-discharge and compensates the voltage drop
Specification:
Size of the board: 50×50 mm Distance between the mounting holes: 45 mm Diameter of the mounting holes: 3 mm Power supply voltage: 8–25 V (3s-5s LiPo) Maximum motor current: 1,5 A 5V output current to power external devices: Up to 1 A
Comments (0)
Add Comment
- User Lists
