lalisaisabella's blog View Details
Posted by lalisaisabella | Mar 22, 2019 @ 01:22 AM | 754 Views
Installation and Set-up
Please make sure that the inflatable is operated by trained operator(s), a trained operator is one that has been instructed in the safe operation of a particular inflation device and has completely read all instructions provided by the manufacturer of the ASTM recommended operations of inflatable structure devices
Tie Downs ( ASTM recommendation)
1.All air supported devices shall be anchored per manufacturers requirements.
2.All ground stakes/anchors shall be of sufficient depth to prevent movement of the device at the maximum allowed operational wind speed.
3.No more than two tie down ropes shall be attached to any one tie down stake/anchor.
4.All tie down ropes/straps attached to the device must be used.
5.In lieu of tie down stakes/anchors, a minimum of 75 lbs weight must be attached to each tie down. The weight used shall be of sufficient amount to prevent movement of the device at the maximum allowed operational wind speed.
6.In lieu of tie down stakes/anchors, sand bags, water barrels, metal weights may be used. No concrete or cinder blocks will be allowed.
7 . No tie downs to motor vehicles shall be allowed.
8. Ropes, tethers and tie downs shall be sufficiently strong enough to prevent breakage.
9 The recommended size is solid-braided polypropylene with a tensile strength of 3700 or 370 lb test rated.