mlilasic's blog View Details
Archive for September, 2018
Posted by mlilasic | Sep 26, 2018 @ 06:20 PM | 9,282 Views
Review of Eachine US65 UK65 65mm Brushless Whoop FPV Racing Drone BNF Crazybee F3 Flight Controller OSD 6A Blheli_S ESC & DVR test flight

Preparation for winter is beginning. Winter fun is called Eachine US65 or UK65, depends on your flag preferences, but its 65mm - 28g - brushless tiny whoop...

Eachine US65 UK65 65mm Whoop - ACRO AIR MODE test flight (2 min 53 sec)


Item Name: 1S 65mm Brushless Whoop racing drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: (without battery)

Weight: (with Original 250mah lipo battery)

...Continue Reading
Posted by mlilasic | Sep 26, 2018 @ 04:59 PM | 8,170 Views
Review of Runcam 3S WIFI 1080p 60fps WDR 160 Degree FPV Action Camera Detachable Battery for RC Racing Drone & HD flight footage

New FPV session like HD cam from Runcam just came out. Its successor of RC3 (my review of RC3 is here) and its called Runcam 3S. After Gopro stopped Runcam from selling Runcam 3, Runcam did some redesign and lounced RC3S.
It doesn't have waterproof housing or video stabilization, so this is a real HD cam for FPV flyers and not Sports cam like GOpro Hero or Session.
It also has FPV video out so you can use it as a FPV cam parallel to HD recording. Useful for slow flying quads and videography. For FPV racing and freestay flying delay could be issue. I will try to test delay of RC3S.

On full battery it can record for 27min ([email protected]).

Video Resolution: [email protected] / [email protected] / [email protected] / [email protected]
Video File Format: MOV

details of [email protected] video file:

Image Resolution: 2MP
AV Output Format: NTSC / PAL Switchable
Communication Interface: Micro USB
microSD card supported: 64G max
Battery Capacity: 850mAh

...Continue Reading
Posted by mlilasic | Sep 24, 2018 @ 04:37 PM | 8,162 Views
Posted by mlilasic | Sep 19, 2018 @ 06:26 PM | 10,117 Views
Review & Build Log of Eachine Tyro99 - 99$ DIY KIT - 210mm DIY Version FPV Racing RC Drone F4 OSD 30A BLHeli_S 40CH 600mW VTX 700TVL Cam & DVR flight footage

Its not often that quads come in a DIY kit. This is great hobby and especially part in which you build yourself an quad and on maiden it flies. Its awesome feeling to create something that flies and everybody should try building they own quads at some point.
This is a great opportunity because this kit costs 99$

Its unbelievable price. If you would only by parts by yourself it would certainly cost more.

Maiden flight with original lens:

Eachine Tyro99 maiden BF 3.5.1 - 210mm DIY FPV Racing RC Drone F4 OSD 30A BLHeli_S 40CH 600mW VTX (4 min 18 sec)

Re-Maiden flight with wide lens:

Eachine Tyro99 DVR wide angle fpv lens maiden BF 3.5.1 - 210mm DIY FPV RC Drone F4 OSD 1300mAh 4s (5 min 29 sec)
...Continue Reading
Posted by mlilasic | Sep 19, 2018 @ 04:45 PM | 6,938 Views
Review of BrotherHobby Speed Shield 2207.5 1750KV, 2108KV, 2400KV, 2700KV, 3400KV 4-6S Brushless Motor for FPV Racing RC Drone

When I first saw Brotherhobbys Returner R5 Deadpool motor I had to have it. It was beautiful. They also had Red Hulk color scheme.
I really love Brotherhobby design, color schemes and quality.

Now Brotherhobby has its newest motor called Speed Shield series. Its new size class of 2207.5.
Motor also looks beautiful like R5 series. It reminds me on Captains America Shield

It comes in few KV options:
  • 1750
  • 2108
  • 2400
  • 2700
  • 3400
and its rated from 4S to 6S. Awesome!

Configuration: 12N14P
No.of Cells(Lipo): 4-6S
Rotor: N52H arc magnets
Stator: 0.15mm Nippon Steel silicon steel
Shaft: Titanium Alloy hollow shaft
Bell cap: Al 7075
Base casing: Al 7075
Prop Adapter Shaft Thread: M5
Bearings: Japanese NMB 9x4x4mm

...Continue Reading
Posted by mlilasic | Sep 18, 2018 @ 05:32 PM | 4,402 Views
JHE42B 110DB Finder Buzzer Built-in Battery with LED Light for RC Drone F3 F4 F7 Flight Controller

Notice: Now BG also sells Vifly Finder v1.2 battery powered buzzer - lost drone finder- "New V1.2 Version, support 36 Hours beep"

This summer my friend and I were flying over the woods and he crashed. Lipo on his drone got disconnected in crash so he lost possibility to turn on buzzer on his drone . We were looking for his quad for 6 hours and couldn't find it. Loss to be greater, he had GoPros 4 on quad with lots of flight footage. It was lost too.
That evening , when I got home, I ordered immediately this little device. It can work as ordinary buzzer, but slightly louder, but more important it has its own builtin battery so it will sound even flight pack gets disconnected from the quad, plane etc...

I highly recommend this product.

Test jjj (2 min 33 sec)

JHE42B 110DB Finder Buzzer vs. ordinary piezo buzzer - Built-in Battery with LED Light for RC Drone (1 min 0 sec)
...Continue Reading
Posted by mlilasic | Sep 15, 2018 @ 04:52 PM | 6,148 Views
Review of Jumper T12 OpenTX 16CH Radio Transmitter with JP4-in-1 Multi-protocol RF Module for Frsky JR Flysky

"One transmitter to rule (control) them all"
My new transmitter just came. Its Jumper T12 OpenTX 16CH Radio Transmitter with JP4-in-1 Multi-protocol RF Module.

Transmitter feels nice in hand, and more important sits nice in hand.

Best things on this transmitter are:
  • small, light, compact and east to carry around
  • multiprotocol RF module included
  • JR/FrSky compatible module bay - you can use FrSky R9M or TBS Crossfire modules
  • runs on OpenTX - best transmitter SW available - OpenTX SW runs on very popular FrSky transmitters like Taranis X7, X9, X9D etc... and also possibility to use Companion TX on PC for creating, modifying, backing up and transferring models to other OpenTX running (Taranis) Transmitters

I am looking forward to using it on the longer run, because,
beside using its 4-in-1 Multi-protocol RF Module I am also getting FrSky R9M RF module so I will be trying to fly some long range quad I am building with Jumper T12. It will be interesting I hope.

In my RC pilot life I started with some really cheap 4CH FlySky stuff, than iRangeX iRX-i6X, than moved Turnigy 9XR with FrSky XJT module, than FrSky Taranis X7 and my latest and greatest FrSky Taranis X9D SE.

Now some more info on Jumper T12:
the T12 version does indeed support Crossfire and in CRSF mode with LUA script support
and most importantly WITHOUT any...Continue Reading
Posted by mlilasic | Sep 15, 2018 @ 01:17 AM | 3,581 Views
Review of Eachine VTX03S 0/25/50/100/200mw 40CH 5.8G FPV Transmitter With PITmode Smartaudio Function

Next step in Eachine VTX series is VTX03S. Its like VTX03 (of witch my review is here) but with addition of SmartAudion functionality.

1km range test:

Eachine VTX03S 200mW 1km range test X21 mod (7 min 58 sec)



Output power: 25mW/50mW/100mW/200mW switchable
Input voltage: 3.3-5.5V
5V camera supply, 530mA(MAX)[email protected]
5V camera supply, 450mA(MAX)[email protected]
5V camera supply, 360mA(MAX)[email protected]
5V camera supply, 280mA(MAX)[email protected]
Video system: NTSC/PAL
Antenna dimensions: 55mm X 5mm diameter
Antenna: IPEX
Size: 21.43*15.20mm(L*W)

...Continue Reading
Posted by mlilasic | Sep 15, 2018 @ 12:53 AM | 2,860 Views
BIG promotion from HOBBYCOOL:
By putting 4 x 2305 motors in cart, buyer will receive note in cart page they are eligible to get the 5" frame (40$ value) free of charger.

Link to 2305 (1800/2500KV) motors is HERE

Link to 5" stretch X frame is HERE

...Continue Reading
Posted by mlilasic | Sep 06, 2018 @ 04:02 PM | 19,611 Views
I had BAYANGTOYS X21 Brushless Quad, which originally looks like this

with broken transmitter laying around so I decided to get it in the air with parts I had laying around my house.
And now it looks like this:

From X21 I used:
  • 2200mAh 3S lipo
  • frame
  • motors
  • props
  • PDB
  • 5V regulator

I added:
Eachine TX805 5.8G 40CH 25/200/600/800mW FPV VTX
Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP FPV Antenna
APM Power Module
and orange UHF TX/RX LR system which is now obsolete so I recommend Frsky LR 900MHz system:

and also used for flying this gear:
Taranis X9D Plus Transmitter SPECIAL EDITION
Skyzone FPV goggles
with ImmersionRC SpiroNet 5.8GHz RHCP Antenna
Posted by mlilasic | Sep 01, 2018 @ 05:58 PM | 4,937 Views
Review of Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX LED Display Support OSD/Pitmode/Smart Audio

VTX for my new test quad build just came. Its small VTX with MMCX antenna connector and SmartAudio.
VTX looks great and quality build. DVR Test flights in post #2.

Frequency: 5.8G
Channels: 40CH

Input voltage: 7V~24V
5V camera supply: 120mA(MAX)[email protected]
5V camera supply: 200mA(MAX)[email protected]
5V camera supply: 300mA(MAX)[email protected]
5V camera supply: 350mA(MAX)[email protected]
Extra features: Smart audio
Power supply: 5V output for Camera
Output power: 25mW/200mW/600mW/800mW switchable
Antenna connector: MMCX

...Continue Reading