Tracyzhong's blog View Details
Posted by Tracyzhong | Nov 27, 2018 @ 01:29 AM | 2,272 Views
http://www.dys.hk/product/645.html

DYS guys released a big current ESC name Aria 70A , which can work for X-class , allow current up to 80A

Product Size : 21.5*42mm
product weight : 9.52g ( without motor wires )
Cont current : 70A
Burst current: 80A
Input voltage : 3-6S
Firmware : BLheli_32

◆ With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity
◆ Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection.
◆Support Blheli_32 firmware,can use the signal wire to upgrade the firmware or
change the configuration on line
◆ Current Meter to help show current indication of OSD;
◆ With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc
◆ It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200.
◆ With special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter
◆ The twisted- pair signal wire can lower the crosstalk inside cooper wire when it transfer,which will make the flight more stable
◆ MCU hardware,Driver circuit ,Mosfet will come with double voltage protection.

◆ To adopt the new process MOSFET of low internal resistance, will help increase resistance to flow.Also,the professional MOS driver chip makes the best efficiency.
◆ Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability.

◆ With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build
Posted by Tracyzhong | Sep 29, 2018 @ 02:41 AM | 869 Views
https://www.alibaba.com/product-deta...7cc271d2oCmfnq

Item name: Aria40A
Input voltage: 3-6s Lipo
BEC: NO
Size(mm)L*W*H: 11*34.5mm
Weight: 356G
Cont Current(A):40A
Burst Current(A) :50A
Firmware : BLHeli_32bit

1)With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity.
2)Built-in sensor can be reaction of temperature,output power,output current etc,also programmable for protection.
3)It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200
4)With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build.