Thunder50BMG's blog View Details
Posted by Thunder50BMG | Dec 07, 2018 @ 01:05 PM | 883 Views
Not much to say, just another fun build with added twist to a PENTACOPTER platform. Originally design by Nebbian of this thread but, added another horizontal motor for more yaw control.
Can't complain the way it's flying and something not so boring to fly.

Will add the specs later or maybe not.

Close-up pics:



Maiden:

PENTACOPTER * The NEXT LEVEL # 2 * Maiden (6 min 1 sec)
...Continue Reading
Posted by Thunder50BMG | Nov 08, 2018 @ 05:10 PM | 1,718 Views
One of my favorite platform is the tricopter and with the right and correct tuning , it's one of the best acro flyer too and it's very easy to build and tune.

With just couple of channel reversing on the TX , we can have a tricopter to fly in reverse like the servo out and here is mine .

I have built a reverse tricopter a while back with different frame and this one has the side to side twin motors higher or elevated from the single one.

SPECS:

KK2.1.5 RC911 SL MIX R4 / SUNNYSKY'S V2216-12 800KV MOTORS / HK 30A SIMON K ESC'S / CORONA DS329 HV MG SERVO / APC 10" PROPS / SCRATCHBUILT FRAME * 16MM CF BOOMS* GF MOTOR MOUNTS* 450 HELI LG.

CLOSE-UP PICS* VIDEO will follow soon.

...Continue Reading
Posted by Thunder50BMG | Oct 30, 2018 @ 03:40 PM | 2,065 Views
Nothing new really , just another fun build and re-visiting and enjoying on how this kind of platform fly.

SPECS:
KK2.1.5. RC911 R4 ( Chinook Custom Mixes) / 2x SunnySky V2216-12 ii 800Kv's / HK 30A SK Esc's / 10 " CF PROPS / Flite Test yaw System / EMAX ES 3154 METAL Gear SERVOS / Aluminum Body( WoodBOOM) / 500 HELI LG

Here are some close-up pix and maiden video:

...Continue Reading
Posted by Thunder50BMG | Aug 25, 2018 @ 02:55 PM | 2,305 Views
As much as I like tilt quads, this platform has the most PITA to build and the belt is just very annoying for me, IDK 'bout those other guys but, I am just NOT a fan of the belt system. So , I decided to modify mine into a NON-BELT unit . With the belt, it has lot's of play and I eliminated it by modifying it to direct drive.
Motors has been extended out to be able to use a larger props.
The tilt response on this non-belt system is fast and smooth and with the TGY 210 DMH Metal Gear Servo, it's just a very fun flyer and responsive.

SPECS:
UNCASED KK2.1 HC / 4- DYS 20A BL HELI / OPTO ESC'S / 4- TMOTOR MN2213 950 KV ( 3DR ISSUE MOTORS) / 1- TURNIGY TGY 210 DMH METAL GEARS SERVO / 4- 9" GF PROPS / 1- ZTW 3A UBEC / THE TILT MODIFIED SYSTEM FRAME

FLYING WITH :
TARANIS PLUS * X8R1 RX * 3S 2200 Mah GENS ACE LIPO

CLOSE-UP PIX & VIDEO:



.....and up !!!

THE TILT * MODIFIED * NON - BELT SYSTEM (6 min 55 sec)
...Continue Reading
Posted by Thunder50BMG | Jun 27, 2018 @ 12:42 PM | 3,829 Views
To celebrate the summer, I decided to do a summer fun build and just to remember a little something.
All parts was on hand so ,I cut a unique 2 part Aluminum frame fitted with a 450 heli black LG with painted wood for the main boom making the whole platform lighter.
She flew the way I was expecting it and pretty fun to fly...

SPECS & MAIDEN VIDEO :

KK2 HC / RC911 FW / MULTI-STAR 20A ESC'S / T-MOTOR MN 2213 950 KV / FLITE TEST YAW SYSTEM / EMAX ES3104 / 9" GF PROPS
/ DOUBLE ALUMINUM FRAME / 450 HELI LG'S

...Continue Reading
Posted by Thunder50BMG | May 29, 2018 @ 03:37 PM | 2,850 Views
Maybe the food was bad or something but, this idea came from nowhere and I was not expecting it to fly but, it did. I have built a few of the Chinook platform and I was getting bored of it and decided to go with another motor placement. With a little tweaking on the mixer editor and PI settings ,it did flew and the agility of the rudder was totally amazing.

SPECS :
Mini KK2.1.5. (Custom Mixes) / 4x: SunnySKY's X2245-16 2300Kv / 4x : DYS 20A BL Heli OPTO Esc's / 2x : FliteTEST Yaw system / 2x : Emax ES3104 Servos / 4x : 8 inch GF White PROPS / ZTW 3A BEC / 450 HELI Modified Platform

Here are some close-up pictures & maiden video.

...Continue Reading
Posted by Thunder50BMG | May 27, 2018 @ 12:17 AM | 2,929 Views
Just having another fun build stretching a 250mm (approx. 9") frame using T6 Aluminum to 12 inches platform. Only the CF frame was replaced and all the VQ250 components are being used.

Not much to say and I can't complain the way it's flying and with 3 switch mode on my TARANIS PLUS , it can fly straight horizontally on fast forward flight for racing and can switch back to a normal quad if needed.

Close-up BUILD PIX and Video:

...Continue Reading
Posted by Thunder50BMG | Apr 21, 2018 @ 05:12 PM | 3,636 Views
One of my favorite flyer is the VQ250 V1 (VectorQuad) that I built a while back and because I don't fly FPV, it's just too small to fly it LOS. So , I decided using it's components to build a larger platform to better see it LOS flying.

Original VQ250 V1 dimension:
Rear motor to Front - 6 inches
Motor 1 to 2 - 8 inches

Modified Platform:
Rear motor to Front - 10.5 inches
Motor 1 to 2 -10.5 inches

Specs:
Mini KK2.1.5 RC911 R4 SL-MIX / T-MOTORS MT2208-10 1850 KV / 20A MAYTECH-BL HELI / FRSKY V8R7-II- TARANIS PLUS TX / GF MAIN FRAME W/ CF BOOMS / 8 INCHES COMPOSITE PROPS / TGY-210DMH SERVO

CLOSE-UP BUILD PIX



Posted by Thunder50BMG | Mar 27, 2018 @ 03:21 PM | 3,167 Views
Been gathering my guts to do and fly acro on a Dualcopter for a while now and this platform did what it's design for. I was not totally sure that the maiden will go as plan so I took the landing gear off just to think ahead if it will crash then my landing gear will not be destroyed.

So simple platform and made of salvage parts but, the yaw system and motors are new. Something that I will not care crashing if things will not go as I wanted.

With RC911 R4 SL MIX fw, acro flying is made easy and the maiden went pretty well but, I did a pretty stupid move at the end. There was no landing gear and the only choice I have was to catch it by hand .

SPECS:
Mini KK2.1.5. RC911 R4 SL-MIX FW / TGY MULTI-STAR 20A BL HELI ESC's / T-MOTOR MN2213 950KV / FLITE TEST YAW SYSTEM
EMAX ES 3154 SERVOS / GF 10 " WHITE PROPS / GENS ACE 3S 2200 MAH LIPO / SCRATCHBUILT PLATFORM

CLOSE-UP PIX & MAIDEN:
Posted by Thunder50BMG | Mar 17, 2018 @ 03:53 PM | 3,837 Views
If you are stuck on this hobby building same pre-historic multi-rotor configurations, I am inviting you to spice it up by building newer configuration like this IN-LINE BICOPTER with Chinook type body. If you are talented enough to make a fuselage then this project is perfect for you. Wish I have the talent but, I don't and I will just end this project like this.

Specs are the same as the 1ST build, even the MTM @ 19 inches. The Sunnyskys motors made this platform super smooth and with the FiteTEST yaw system, it's just totally perfect.

Close-up PIX ....maiden video will follow soon.

...Continue Reading
Posted by Thunder50BMG | Mar 04, 2018 @ 12:39 AM | 6,943 Views
lot's of rain lately here in Cali and I took the wasted indoor time to build this unit.Originally designed and this the third version and I think it's totally a fun flyer too.

Same as traditional dualcopter,it's pretty cheap to build. This is flying a KK2.1 with RC911 R7 Fw (Zip Files) with the added Dualcopter Chinook on the motor layout and set Mixer Editor.

SPECS: Turnigy D2836/9 950 KV / MayTech 20A ESC's / MINI KK2.1 w/ RC911 R7 FW / Flite Test yaw system w/ ES3104 Servos / 10" GF Props
/ Platform : Modified 450 Heli frame w/ Wood boom

Close-up pix and Video:
...Continue Reading
Posted by Thunder50BMG | Feb 02, 2018 @ 04:53 PM | 4,517 Views
First off, not my design. A friend of mine pointed me on this project (Nebbian) of Tom Stanton at YT and the design catches my attention and time is on my side so I decided to build my KK2 version and see if I could get it to the air. With total PID tweaking, it did flew and nothing to complain and handles pretty well on a tight space.

Tom uses 3D printer for some of his parts,like the yaw system, motor mounts and servo mounts and LG's but, I have no 3D printer and honestly,I'm not a fan of 3D printers. So ,I built mine with Flite test yaw system, wood and Alum. LG and more as showed in the pix.

Specs:
KK2.1.5. Mini / 2x : Sunnysky X2212-13 980 KV / Emax ES3104 Servos / 2X : Flite test yaw system / Scratchbuild Platform

Close-up pix and Maiden videoe:

...Continue Reading
Posted by Thunder50BMG | Dec 24, 2017 @ 07:45 PM | 5,405 Views
As a STAR WARS fan , I was really tempted to do this project. I was not sure if I can make it up in the air but, it did to my surprised. This is the stock toy replica that I got from Amazon for like less than $30. I have no choice but to take out some parts inside for weight reduction for it's on the heavy side and disable the firing mechanism.

Not the best conversion but, it does fly and I can't complain.

Here is the Amazon link :
https://www.amazon.com/dp/B01MTG6IPH...955e55130266_S

Here are some close-up build pix and maiden video:

...Continue Reading
Posted by Thunder50BMG | Nov 06, 2017 @ 12:16 PM | 4,909 Views
After 5 years on this hobby, I have built countless of Multi-rotors, all configurations and my own designs and configurations/mixes. Sadly, I am at the point that this hobby is really getting boring and my interest is almost gone. Time might come that I will totally retire and RC-Plane flying is not on my menu and it has not catch-up with me.

I have built some bicopters/dualcopters and it's one of the most interesting configuration and the most simple thing to build for it has the least parts and really cheap to build and for some /most guys,it's the most disappointing and frustrating project and mostly just gave up on it.

I have all of my build on this compilation and if you are interested, you are very welcome to see them here.

https://www.rcgroups.com/forums/show...on-compilation
Posted by Thunder50BMG | Sep 15, 2017 @ 01:14 PM | 5,303 Views
Here is another evolving platform project that's a little interesting . Not much to say about it, all specs are the same on the EVOLVE 02 ,just another platform that is catching dust. One thing I added was installing my RC3 on this for aerial fun video and I guess the video was just fine.
By looking at the pictures ,all I did was move the whole motor and yaw assembly to the dismantled tower quad frame ,connected all the electronics and that's it, nothing special....just another fun build.

Lastly , the name NINELEVEN was to remember all the people that died during that day....and it's the day I started this project.

Here are some close-up pix .
Maiden video will be added next.

...Continue Reading
Posted by Thunder50BMG | Sep 03, 2017 @ 07:38 PM | 6,611 Views
Not much to say really. Just another fun build of a BICOPTER/DUALCOPTER flyer with a recycled frame that is catching dust and with all NEW Parts on hand.


This build LOG is getting really boring so, on my CLOSE-UP Pix, I have my pet leather back bearded dragon all over the bicopter platform but, you can still see the platform-LOL.


Specs: KK2.1.5 Fc /RC 911 R5 / X2212-13 KV 980 II / DYS 30A BL Heli Esc's / EMAX ES 3104 Servos / 10" GF Props / FLITE TEST Tuff TILT Yaw system / Recycled PVC/ Wood frame

PIX and Maiden video :::::

...Continue Reading
Posted by Thunder50BMG | Aug 11, 2017 @ 03:07 PM | 5,850 Views
I guess we are just bored and sick of this ZMR 250 platform and as much as I really like this full carbon fiber frame and don't wanna put it to waste, I decided to convert it to something else. I have seen guys converting it to a TRICOPTER and Y4 and I don't remember seeing a VTAIL, maybe one did but, I have not seen it.
This ZMR250 frame is very versatile and converting it is pretty simple and here is mine converted it to a VTAIL and she can fly really nice and acro flying is pretty amazing too.

SPECS:
KK2 Mini:RC911 R4 SL MIX Fw / SUNNYSKY'S X2204S-16 1300Kv / DYS XM 20A BL heli V1 / CYCLONE T5050C Props / ZMR 250 CF Frame-Modified to a VTAIL

CLOSE-UP PIX
MAIDEN Video will follow soon.

...Continue Reading
Posted by Thunder50BMG | Aug 06, 2017 @ 12:03 AM | 5,487 Views
Well, 3DR SOLO Platform can fly really nice too with a KK2.1.5.
flight controller. Not much to say, this project is about a non-working 3DR Solo quad that a friend gave me,gutted all the inside and installed a KK2 FC on it with Sunnysky motors and all original lights connected it looks ok and fun to fly too and I can't complain.

SPECS:
KK2.1.5. RC911 SL-MIX Fw (STANDARD Size) / SUNNYSKY'S X2216-11 KV 880-II / 2OA SIMON K ESC'S / 9 INCH GF PROPS / GENS ACE 3S
2200 Mah LIPO / MODIFIED 3DR SOLO Platform

CLOSE-UP PIX & MAIDEN Video :

...Continue Reading
Posted by Thunder50BMG | Jul 26, 2017 @ 01:52 PM | 6,577 Views
I got this frame a while ago from RCG Classified with the plan to install a Mini KK2 fc on it.
Gutted all the original parts inside to minimize the weight and to be able the frame to accept the KK2 Mini and it went pretty well. This size of a Vtail is really interesting to me and this one is really a nice and fun to fly too.

SPECS:
Mini KK2.1.5 / DYS BEI 1806 2300Kv motors / DYS Bl Heli XM 20A ESC'S (OneShot125) / Eachine Vtail 120 Stock FRAME (Gutted) / 3" DALProps

NOTE :
If you are on this hobby that long, we all know that VTAILS are different. Changing props size or flying with 4S from 3S will need some or little adjustment to the fc PID's but, if you are lucky depending on your platform size, sometimes no adjustment is needed. Just be aware and don't think that your fc or electronics is going bad when it acts not normal after changing prop size or lipo cell count.

Here are some close-up PIX and MaidenVIDEO

...Continue Reading
Posted by Thunder50BMG | Jul 22, 2017 @ 09:19 PM | 6,602 Views
This is another platform that we can transform a TALON HEXCOPTER platform. Did built a traditional hex,
then a tricopter and this quadcopter and they all flew nicely as I wanted them to and the build was clean and simple.

Using all available extra parts on hand.

Specs: Talon ALL Carbon Fiber Hex Frame * 4x- ZTW 25A BLheli ESC's * 4x- TGY D2830 1000KV Motors * KK2.1.5 RC911 SL MIX R4 FW * 4x -GenFAN 10" Nylon Props

Here are some close-up pix
Video will follow soon

...Continue Reading