gquiring's blog View Details
Posted by gquiring | Oct 23, 2018 @ 07:01 AM | 1,148 Views
Some cool background while flying my 3.5 meter sailplane yesterday.
Posted by gquiring | Jul 19, 2018 @ 01:16 PM | 2,140 Views
The drifting vario problem with the G-RX8 can be a bit disappointing. It's been suggested that once the RX is on for a couple of minutes the drift has settled down. But resetting the vario from wheel button is a bit awkward if you are holding the model in your hand. So I setup an additional function on my timer/throttle lock switch to also reset the vario. It works by looking at the timer, if the timer = 0 then it's the first time going so reset it when you unlock the throttle and start the timer. Once the timer is no longer 0 it won't reset it.

Frsky G-RX8 reset drifting vario with your throttle lock/timer switch (3 min 37 sec)

Posted by gquiring | Jul 17, 2018 @ 08:52 AM | 1,672 Views
I finally got this Alpina back together. It had a devastating crash that snapped the fuse in half and folded the nose over. It took a lot of fiberglass cloth and Bondo to get her back together. Luckily the repair only added about 4 ounces.

I did a build thread over here:
https://www.rcgroups.com/forums/show...and-discussion
Posted by gquiring | Jun 07, 2018 @ 07:10 PM | 1,992 Views
After a hellish week or so watching countless videos on OpenTX and receiver programming I finally am getting somewhere. The S6R/S8R gyro receivers need a lot of programming to make them work. Now that I get, it's easy, but getting there was not so easy. I feel the biggest issue is many of the videos are dated or incomplete not telling you the whole setup steps. I am super impressed with these LUA scripts, programming the receiver with a script is easy.

I put a S8R RX in my Hobby King Hummer. This is my go to 3D foamy. It's similar to the old Flash. Mine still has an Eflight 450 on it with Hitec 65 servos which are well over 10 years old now! First flight was interesting, I did not know the default trim level for a model is 'fine'. In that mode the trims are useless, they barely move the servo. I recommend setting them to course to act like most radios. I had a hard time with my expo. It does not feel right, I need to study my Graupner settings and see how I can tune the curve in the Horus radio to get the same movements.

Overall the maiden was fine. I launched with the gyros off, got the trims sorta worked out (ran out of aileron because of the fine setting) and my elevator channel was way too touchy. I then moved the switch and everything felt good. I had the sensitivity setup on S1 and tried some different settings. When I tried the level mode the plane went crazy. I really don't care about that mode and will try to figure out how to prevent the switch from going into that mode.

I put a 2nd flight on my Aether sailplane today and that flew perfectly. I also changed the trims to course which helped out a lot. I got the main screen setup exactly how I want it now. I can see max height, pack voltage, timer and v speed.

Overall this radio is working out. I'm not regretting my purchase.
Posted by gquiring | May 25, 2018 @ 10:54 PM | 2,379 Views
One of the early issues I found with X10S are the switch locations are different. Normally I use the back left momentary switch on my Graupner MZ-24 for telemetry. On the X10S that switch is on the right side. So after deciding what to do I felt it's best to move the switches around so my two main radios have the same switch layout.

A larger issue I noticed was the location of the rear switches. I don't know what Frsky was thinking but the average person cannot reach those switches unless you slide your hand up which is awkward while flying. I decided to drill some new holes and relocate the switches closer the edge of the case.

Here's a quick video:
Frsky X10S relocating switches and drilling new holes for switch locations (4 min 32 sec)

Posted by gquiring | May 03, 2018 @ 06:07 PM | 3,089 Views
I finally pulled the trigger this week and ordered and received my first Frsky radio. I have been interested in trying OpenTX for a couple of years now but never saw it in action. That changed after our recent Fun Fly event hosted by Eutawville had a guest pilot show up with his Horus 12 radio. He had owned Graupner and Jeti and loved his Horus.

I did some comparison shopping and knew Aloft Hobbies carries Frsky. I was surprised when I added the radio to my shopping cart that the shipping was not free. I was told getfpv also sells them and they do ship for free (USPS Priority shipping). Since I was already an Aloft customer and I have bought several Top Model sailplanes from these people and have also sent business their way I figured I will give them a chance to not lose a sale. They had no interest in offering free shipping or even lowering their outrageous $28 shipping charge! I also told them their competitor was not only free but they were tossing in the R9 module for free. So they lost that sale and I will discontinue sending business their way. I had a bad servo from them last year that required me to ship back to them at my expense. Plus they had no stock to replace it. Not good.....

Anyways back to Frsky. What I really like are the costs of the receivers. This is where Graupner gets you. They have been steadily increasing their pricing and now a 6ch gyro receiver is $100! A 8 ch simple RX is $65. I fly sailplanes so I need 8 ch and a vario,...Continue Reading
Posted by gquiring | Jan 23, 2018 @ 11:29 PM | 3,079 Views
I got the email like millions of other Youtubers. 4,000 hours per year and 1,000 subscribers required. I looked up my stats and I am at 4,800 hours last year but have about 498 subscribers. Why subscribers matter since I have the hours is puzzling. Not that I made much off my Youtube channel it was neat to get a check on average 3 or 4 times a year for about $100.

So my friends on RCG, how about hitting that subscribe button for me? I'm going to continue making some videos here and there either way. I just think it's wrong what Youtube aka Google is doing this.

Here's a few RC videos I made over the years that got some decent views.

EPP Flash in HD 1080P Panasonic TM700 (5 min 58 sec)


YEP ESC programming setup for airplanes (6 min 35 sec)
...Continue Reading
Posted by gquiring | Jan 18, 2018 @ 03:06 PM | 2,799 Views
This is what some of us RC guys do when the weather is not going well. I picked up one of these inexpensive kits on eBay. It uses 512 3mm LED's formed in a matrix. It dances around in animation and is nice conversation piece. So if you enjoy soldering or were an avid Heathkit guy like I was back in the 70's this is worth building. I made a video to help out anyone who suffers through the bad documentation that is included.

LED Mini Cube 8*8*8 project (28 min 15 sec)

Posted by gquiring | Sep 23, 2017 @ 07:52 PM | 2,956 Views
The cotton makes a great background for some nice photography. Grafas Maxi and Prelude both from Top Model.
Posted by gquiring | Sep 17, 2017 @ 08:09 PM | 3,184 Views
Little did I know what was coming up while taking some photos of my friends plane. To say the least a few seconds after I took this shot the plane went into a death spiral. The wing bolt came out during flight. If you look closely at the photo you will see the bottom wing separating.
Posted by gquiring | Jul 30, 2017 @ 07:03 AM | 3,599 Views
I had a great time with my friend Gene flying our sailplanes in Eutawville, SC. Grafas Maxi 3.5 and Prelude 2.5 both from Top Model.
Posted by gquiring | Jun 22, 2017 @ 06:05 PM | 4,400 Views
I was talking with a fellow RC'r and he is struggling with how to fit these long sailplane fuses in the car. I have been making these carriers for years to take advantage of the bucket seats in the front. You can run the noses up to the dashboard to get them in smaller cars. I don't glue the PVC together so it's easy to disassemble if you need to bring something big home from the store. I used outdoor carpeting turned inside out to help keep everything from sliding around.
Posted by gquiring | Jun 14, 2017 @ 10:34 PM | 5,941 Views
I recently bought a Top Model Samsara. I did a build thread over here:

https://www.rcgroups.com/forums/show...cussion-thread
Posted by gquiring | Apr 25, 2017 @ 01:04 PM | 5,708 Views
I ordered a sailplane holder from Greece recently. It arrived this week and I am glad I got it. I am always nervous leaving my sailplane on the grass, loose dogs and small kids. The other day I watched a small kid jump over my sailplane because it was too much effort for him to go around it This will give me some peace of mind. It's well made and sealed with two coats of sanding sealer. The product is priced reasonably at $35 bucks. The problem is shipping from Greece to the USA was $38.

I purchased on this thread:
https://www.rcgroups.com/forums/show...Glider-Carrier

www.facebook.com/SailplaneWorkshop
Posted by gquiring | Apr 22, 2017 @ 06:31 PM | 24,680 Views
Still having fun with my vinyl cutter.
Posted by gquiring | Jan 18, 2017 @ 06:07 PM | 8,161 Views
I decided to take the plunge and go for the MZ-24 Pro. Since I can transfer my models over to the Pro I decided to go for the new version since it has a larger TX battery (5000mah) and some new software. With all the Tower Hobby discounts and e-cash it was a decent price at around $335 with 3 receivers (2 6ch and 1 8ch).

I thought I would not like the red look. Tower was not offering the traditional color. But after seeing it in person I love the look.
Posted by gquiring | Aug 21, 2016 @ 05:41 PM | 8,198 Views
I got the sad news earlier today that Ed Pochinski aka Edy P passed away. It was a surprise to me, I had spoken to Ed maybe a month ago, he was his normal self. He passed away from complications due to pneumonia.

Ed was a guy full of life and always had something positive to say. He loved buying airplanes but rarely flew them. We always busted his chops and he took it well. When I moved to SC about 4 years ago Ed kept an open line with me checking in every few weeks to see how I was doing.

I won't forget him, he along with Bob Mars and Mr C were special people who always entertained us at the local flying field.