fastmax's blog View Details
Posted by fastmax | Dec 01, 2018 @ 05:04 PM | 1,647 Views
JJRC JJPRO X7 Brushless GPS Drone Review

The new JJRC JJPRO X7 Brushless GPS Ready To Fly (RTF) RC Drone with 1080P HD camera and transmitter controlled gimbal has finally arrived

I will start by saying that the quality of this model far exceeds my expectations. It has a look and feel to it that I wasn't expecting at this price point. The maiden flight went very well. All controls function exactly as they should. The drone is incredibly stable, and smooth. GPS hold is accurate and works perfectly, as does the GPS return to home function. You don't have to worry about losing this one, because with the press of a button, it will come right back to you and land itself as demonstrated in the video below.

One thing to take note of. If you want to fly this via the WiFi FPV with your smart phone or tablet, or view the live feed from the on board camera, you will need a 5G compatible device. Unfortunately my phone is not 5G capable, so I am only able to fly this LOS (line of sight) I am sure that in the very near future most phones will support 5G, and many of you probably already have phones that do.

Please be aware though that if your phone does not support 5G WiFi, there are a host of features that you won't be able to enable, or use. However, for those of you that just want a good flying brushless drone with GPS, and long flight times, this is certainly a model worthy of your consideration as it is a very good flying drone, with excellent range.

This awesome new...Continue Reading
Posted by fastmax | Nov 03, 2018 @ 09:32 AM | 3,681 Views
The new Tianqu Visuo XS812 GPS drone with HD camera has arrived!

EDIT-11/21/2018 This excellent quadcopter is available here for $78.99 during the early Black Friday sales going on now

This is an excellent value in ready to fly drones with GPS position hold, and return to home. The package includes everything you need to start flying your new quadcopter, and capture HD pictures, and video. Not only is the camera WiFi enabled, so you can use your phone, or tablet to see what the drone sees in real time, but the camera module also has a micro SD card slot allowing you to record your flights in higher quality than if you're just saving to your mobile device.

The GPS function is incredibly accurate, and does a great job of maintaining height, and position while shooting pics, or vid. You also get GPS return to home, so with the quick press of a button the drone will return and land itself within inches of where you took off from. A great feature which helps keep the pilot from losing the drone in the event that you lose orientation, or if you just want to bring it back without having to pilot it yourself.

Just like the other Tianqu Visuo quadcopters that came before it, the XS812 is a folding design making it very easy to travel with and store. When unfolded you still have a decent sized 250mm drone that is easy to fly, and large enough to still see at a distance. The XS812 is an excellent model for beginners just looking to get into the hobby, or for those that are looking...Continue Reading
Posted by fastmax | Oct 31, 2018 @ 04:12 PM | 3,008 Views
At last my Eachine E015 3 in 1 has arrived! I have been anxiously awaiting this product. I expect it to be a lot of fun since it can be used in multiple configurations, and on a wide variety of surfaces. Rather than just another Tiny Whoop drone, in this box you get the parts necessary to turn your drone into a boat, or a hovercraft/Tiny Whoov.

I received the yellow version with two batteries, but this package is also available in red and with one, two, or three batteries. The price only varies a little bit with the extra batteries so I highly recommend getting the package with at least two batteries.

If you already have a bunch of Eachine E010, E011, FuriBee F36, JJRC H36 etc batteries, then you're in luck because they will all work with this E015. The E015 batteries are 220mah 35c so they are slightly higher capacity than the E010, H36, F36 original batteries.

In the box you also get a manual, a couple spare props, one CW and one CCW, along with a USB charger, screwdriver, and prop removal tool. All in all this is quite an interesting multi purpose RC vehicle available here for under $30

Check out the pics and stay tuned for running video demonstrations in each configuration. I have batteries charging now so I'll start getting some video ASAP.

As always please don't hesitate to ask any questions you might have. Happy RC'ing!!

Running video demonstrating all 3 modes. Really having a lot of fun with this little thing

Eachine E015 3 In 1 Drone Boat Hovercraft Drive
...Continue Reading
Posted by fastmax | Oct 16, 2018 @ 04:49 PM | 3,536 Views
HTRC H4AC Duo 2s-4s Dual Output LiPo Balance Charger Review

Are you looking for an affordable, compact, and easy to use LiPo balance charger, capable of charging two batteries at once? If so then this little H4AC might be just what you want.

This charger is about as easy to use as they come. Simply plug a battery into channel 1, or channel 2, or both, plug your balance connector into the appropriate port, and hit the start button. The charger will then begin charging your battery, or batteries, and the display will show the voltage of each individual cell being charged. It's as simple as that.

Each channel has a fixed output of 2A, so the charger is best suited for 1100-2400mah 2s-4s batteries. I have used it several times now on my Tattu 75c 1050mah 4s batteries, and it has been working flawlessly. Cells have been consistently finishing within .01v of each other on the chargers display, as well as when I use my cell checker/balancer which has always been accurate for me.

The fact that this little guy has a built in power supply makes it perfect for those that don't already own a 12v DC power supply. It is also quite small, so it takes up very little desktop, or bench space, and is super easy to travel with. You can see in the picture below just how small it is next to one of my 65mm Tiny Whoop Drones. Priced under $30 and Amazon Prime eligible, this is an excellent option for anyone on a tight budget, or as a backup/travel charger.

Don't hesitate to ask any...Continue Reading
Posted by fastmax | Oct 01, 2018 @ 01:21 PM | 5,561 Views
EDIT 12/1/2018 Available here for only $99.99 during the Holiday sales.

Flight Controller PDF Manual/Pin Out Diagram Thanks to member GCRC

The new Skystars S225/STX225 DIY Kit is now available. Looks to me like it is going to be an excellent value in the 5 inch FPV racer category. Specs look really good, and I am liking that we are seeing more and more of these quads available in kit form.

My kit arrived a couple days ago, and I finally got a chance to snap a few pics. Hoping to get started on the build this afternoon, and will post more pics as I make progress.


Build is complete. Added a bunch more pics below. Please don't hesitate to ask any questions, or request pics of something I missed. Flight video coming soon. Also added some large zoomable images of the F405 AIO Flight Controller (FC) pinout to aid in wiring for anyone else doing this build. Some of the print on my board was pretty faint and the pics helped me locate the necessary solder pads.


Managed a quick test flight today. Flies very smooth, and has a lot more punch, and speed than I was expecting, especially on 5042 high efficiency props. Should be really impressive on some 5152 props.

EDIT-11-13-2018 Spares are now showing up at Gearbest

Frames are available here for $21.44

Motors are available here for $8.24 each

ESC's are available here for $6.99

I will update if/when more show up.

EDIT-11/26/2018 Printed a shark fin for my Skystars STX225. Thing file here....Continue Reading
Posted by fastmax | Aug 31, 2018 @ 04:05 PM | 4,628 Views
EDIT-11/26/2018 Currently on sale for $169 here during the Black Friday/Cyber Monday sales.

After using the Creality Ender 2 3D printer for nearly a year, and being very happy with the overall performance, and quality of the printer, it was time for an upgrade. See my time with the excellent Ender 2 here.

I wanted a new printer that would be of at least equal, if not greater quality than my Ender 2, and something that had a larger build area, but still had a heated build plate, yet remained affordable. Enter the Ender 3. The Ender 3 is one of the new printers for 2018 from Creality3D. This printer has a 220mm x 220mm x 250mm print area, a heated build plate, the popular MK10 extruder, and arrives with most of the assembly completed for you. I had mine from the box, to ready to print, in just over an hour.

I just built my Ender 3 yesterday, and have only done a few prints on it so far, but I am very happy to say that it has exceeded my expectations. I am amazed that such a nice printer can be had for under $200

This will be more of a log than a review, as I will share my prints, and experiences with the printer over the course of the next few months. My Ender 2 proved to be a very reliable machine. I did hundreds of prints, and for nearly 6 months the printer ran continually without a hiccup. I look forward to seeing if the Ender 3 proves to be as reliable. It has already proven to me that it is a solid performer, that requires very little effort to assemble and...Continue Reading
Posted by fastmax | Aug 29, 2018 @ 11:40 AM | 3,934 Views
Eachine has been bringing some excellent RC models to the market over the past few years. Some of their drones have been really big hits with beginners, and expert pilots alike. Today we are going to be taking a look at one of their new offerings the EX2H.

The EX2H is a complete ready to fly package that includes the brushless drone with 1806 1800kv motors, 2.4ghz radio transmitter with weak signal, and low battery telemtery, 7.4v 2s 1800mah LiPo battery, charger, and a 1080p HD camera for taking aerial videos, and pictures. You also get a set of prop guards, a set of spare props, and an 8gb micro SD card for the camera. The only thing you will need to get up and flying are 4 AA batteries for the radio.

Many of you will recognize the style, and design of this quadcopter, as it is very similar to the MJX Bugs series of multi rotors. It may even be a rebrand of an MJX model. Regardless, it is a very nice drone, that has a high quality look, and feel to it.

The EX2H is a very stable flyer that performs well in altitude hold mode, or in pro mode (no altitude hold). There is a switch on the transmitter that makes it very easy to select which mode you want to fly in. There is also two different speed rates, that can be used by pressing a button on the transmitter. In high speed mode the quad is quite sporty and capable of some pretty fast speeds, and makes it capable of flying in some pretty windy conditions.

Whether you are a beginner pilot, a pilot looking to take...Continue Reading
Posted by fastmax | Aug 28, 2018 @ 01:35 PM | 3,216 Views
Having a bit of fun with the Boldclash BWHOOP B-03 Pro. Be sure to check out our YouTube channel for our monthly giveaways.

A Bit Of Tiny Whoop Fun With The Boldclash BWHOOP B-03 Pro (2 min 46 sec)

Posted by fastmax | Aug 06, 2018 @ 02:45 PM | 3,550 Views
Lula Toys 8807HD-G RTF Mini Review. Awesome $24 Beginners Camera Drone with WiFi FPV.

The 8807HD-G is a folding drone with a style, and appearance heavily inspired by the DJI Mavic. This great flying package offers WiFi FPV, Voice Control, and G-Sensor Mode. This is a complete ready to fly package that includes everything needed to start flying except for 4 AA batteries for the remote.

All camera functions can be controlled via the APP that is available in the Google Play Store for Android users, and in the APP store for Iphone users. Thanks to its folding design this quadcopter is very compact, and easy to travel with. When unfolded you still have a decent 250mm size drone that is incredibly stable, and very easy to learn how to fly with. Thanks to its 3 different speed modes it is also a drone that you can grow with as your piloting skills improve.

Check out the pics and stay tuned for flight video, and footage from the on board camera coming soon.

The drone is currently on sale and available in the USA warehouse here for only $23.99 with free expedited shipping to the Con US, and is also available in the international warehouse here for $39.99

Please don't hesitate to ask any questions you might have.

Happy Flying!!

This drone is this months giveaway on my YouTube channel. Check out the video and enter for your chance to win if you'd like. Giveaway is open to everyone regardless of location. Good luck to all that enter.

Lula Toys 8807HD-G RTF
...Continue Reading
Posted by fastmax | Jul 05, 2018 @ 03:51 PM | 5,551 Views
FuriBee Apis Florea 66 66mm Brushless Micro FPV Racing Drone Review.

My Apis Florea kit has arrived. I have been anxiously awaiting this little quad since I first noticed it on Gearbest. I was shocked that a kit with these specs could be available for only $54.99 Click me to order.

Here is a quick run down of the specs

Model: apis florea
Brushless motor: 1104 7000KV
Brushless ESC: 4-in-1 BLHeli - S 6A (2S LiPo)
ESC support: DShot150 / DShot300 / DShot600
Camera: 800TVL FPV camera CMOS sensor
Video transmitter: 5.8GHz 40CH 25mW
Flight controller: OMNIBUS 1 - 2S F3, with OSD, STM32F303CCT6, MPU6000
Firmware of flight controller: BetaFlight 3.1.7

I have edited the above specs because there were some errors in the specs listed in the product description. The two biggest differences are that this kit includes 7000kv motors, and not 6000kv like the description states. The second difference is that the ESC is only 2s capable, and will not run on a 1s battery. Other than those two things, everything else seems to be as described.

Check out the pics of what is included in the kit, and stay tuned for build pics, and flight video.

Don't hesitate to ask any questions you might have.

Happy Flying!!

Build slide show

FuriBee Apis Florea 66 66mm Brushless Micro Kit Build (0 min 55 sec)

First flight

FuriBee Apis Florea 66 66mm Brushless Micro Kit ONLY $55!! (2 min 13 sec)
...Continue Reading
Posted by fastmax | Jun 17, 2018 @ 09:23 AM | 4,832 Views
The new S1 Pentium from JJRC is one of the mini self righting boats in their S series which includes three very affordable 14 inch boats of different styles. The S1 is currently available for only $36.99 Click me to order.

The Pentium with its red, and white color scheme, immediately jumped out at me as a great looking little boat for running in pools, ponds, and other small bodies of water.

These little water cooled boats are powered by a 370 motor, and a 7.4v 600mah LiIo battery. They have fully digital proportional throttle, and steering, and the steering duties are handled by a micro 3 wire servo. As the title suggests these boats are also self righting, so there is no need to rescue a capsized vessel. Simply apply a quick blip of forward to reverse throttle, and the boat will roll itself upright, ready for more action.

All three models, S1, S2, and S3 are complete ready to run packages, that include everything needed to run your boat, except for 4 AA batteries for the radio transmitter. For safety, these boats also feature a low battery warning beep, and a weak signal warning beep that sends the warning back to the radio so that you know when you're getting out of range, or the battery is getting low.

Check out the pictures, and videos. Please don't hesitate to ask any questions. Stay tuned for running video coming soon.

Happy Boating!!

First run

JJRC S1 Pentium 14" Self Righting Water Cooled RTR Boat (3 min 51 sec)

JJRC S1 Pentium VS...Continue Reading
Posted by fastmax | Jun 08, 2018 @ 02:28 PM | 4,731 Views
The Helifar H106 is a new ready to run, self righting 14 inch boat from a company best known for their FPV Racing Drones. The RTR package includes the boat, radio transmitter, two 7.4v 600mah batteries, and a USB charger. Click me to order.

For a limited time use coupon code RCDeal57 at checkout and get this package for $50.99

My H106 just arrived. First impressions are good. The little boat has a nice feel to it, and I really like the sleek appearance. The instruction manual is quite detailed, and covers everything needed to run, and maintain the boat. The package includes two batteries, as stated in the product description, and they also include a spare prop.

According to the manual there is also some telemetry functions. The boat is supposed to send battery voltage, and radio signal strength information back to the radio. I will check these features out as soon as I get it in the water. Here are some pics. More info and running video coming shortly.

First run. Range is surprisingly good.

Helifar H106 Self Righting RTR RC Boat CHEAP FUN!! (4 min 14 sec)

JJRC S1 Pentium VS HeliFar H106

JJRC S1 Pentium VS HeliFar H106 Battle Of The Budget Boats (6 min 39 sec)
...Continue Reading
Posted by fastmax | May 22, 2018 @ 04:29 PM | 8,056 Views
EDIT-5/26/2018 Frsky BNF is now on sale for $149

The new X140 Pro arrived on my door step today. I've been very excited about getting this one since I really like the original FuriBee X140, which this is supposed to be an improvement on. For those that haven't heard yet, it appears as though FuriBee will be changing their brand name to Helifar.

Anyway, this little racer is built on a 145mm stretched X frame with 4mm arms. The quad is equipped with an F4 flight controller, a Blheli-32 25A 4 in 1 2-4s ESC running Dshot 1200, a 25/100/200mw VTX with Pit Mode, a 600TVL CCD FPV camera, and 1408 3800kv motors. The product desciption on the Gearbest page states 3600kv motors, but mine are clearly marked 3800kv (See pics)

You also get a buzzer, a programmable LED, and 8 Racekraft 3041 4 blade props.

Many of you may have already seen Andy RC's review on YouTube, and he didn't like the stock props. He switched them out for some Gemfan Flash 3052 props and the quad performed much better. I will also be trying it with both. The Gemfan 3052 have been my favorite 3 inch prop since their release.

This little racer is available as an Frsky BNF, a Flysky BNF, or as a PNP model ready for your choice of receiver.

Check out the pictures, and flight videos, and stay tuned for more info coming soon.

First flight, completely stock on stock props.

Helifar X140 Pro 145mm Stretched X 3 Inch FPV Racer (3 min 17 sec)

Slightly adjusted rates, and Andy RC's PIDs with Gemfan 3052 props....Continue Reading
Posted by fastmax | May 16, 2018 @ 10:41 PM | 6,392 Views
My Visuo XS809S just arrived. First impressions are quite good. It is well packaged, and the overall quality of the quadcopter, and transmitter seem above average for quads in this price range. I really like that there is a micro SD card slot on the quad for capturing pictures, and video from the on board camera.

After getting in a couple flights, I can say that the altitude hold on this actually works quite well. The quad remains very stable, and holds its position, even in a slight breeze. The included battery gave me nearly 10 minutes of flight time on its first charge. The LED lights are visible even during daylight hours, so I expect them to work perfectly for helping to maintain orientation when flying at night.

The 3 different rate modes make this an excellent choice for beginners. In low rates it is easy to control, and yaw is slow enough to not change directions so quickly that it takes you by surprise. The second rate increases pitch, and speeds up yaw just a bit, and the third rate gives the quad much more aggressive pitch angles, and allows the drone to easily cut through wind, and gusty conditions.

I just got the APP installed on my phone, and am anxious to get in some more flight time. I will get some pictures, video from the on board camera, and see how well the WiFi FPV actually works. The APP is called XSW UFO, and can be found in the Google Play Store for Android users, and in the APP Store for Apple users.

First quick test flight, trying the different...Continue Reading
Posted by fastmax | May 14, 2018 @ 11:59 AM | 5,222 Views
As a long time fan of all things Micro RC I figured it was time to give one of these little WLtoys A242 1/24 scale RTR 4wd micro Rally Cars a go, and see just what they're all about. I have an RCP track in my hobby room, that I love to run my Kyosho Mini-Z's and Mini-Z Buggy on. I also tried the Redcat Sumo trucks, the Losi 1/24 brushed Rally, and SCT, and the Subotech trucks. None of them came even close to being as fun, or handling as well as my Kyosho Z rigs so they generally collected dust.

I'd watched a lot of videos of these 1/24 offerings from WLtoys, and I knew they were great little vehicles for the price. The problem was that they looked a bit too fast for my RCP track, and it turns out, they are. These little things scream, especially considering they're running brushed motors. They also handle quite well, and absolutely blow away any of the Losi, Redcat, Subotech etc. cars, and trucks that I have tried.

For those not familiar with this WLtoys lineup of A series cars and trucks, here is a quick run down of the basic features. You get a 2.4ghz radio system with 2 in 1 RX/ESC, a 3 wire micro steering servo, an aluminum alloy lower chassis, and aluminum alloy top plate. The cars are equipped with shaft driven 4wd with slipper clutch, four wheel independent suspension, and a full set of ball bearings. They also include a 500mah 20C 2s 7.4v LiPo battery and a basic charger. All spare parts are available at numerous online shops, and there is a growing list of hop up...Continue Reading
Posted by fastmax | Apr 23, 2018 @ 01:41 PM | 5,518 Views
I fly alone 90% of the time, and at least half of that flying is done in my backyard, over, and around a lake. Flying near the water makes me very nervous when wearing goggles, so I decided I needed another option that would give me the benefits of both LOS, and FPV flight. So began my research for putting together an FPV ground station that would be relatively inexpensive, and quick, and easy to set up.

After some web browsing, and a few Google searches, I managed put this little GS together for $40 using items from Amazon, and eBay. So far it has worked flawlessly for me. I'll be taking it to the park with me in the next day or so to see what kind of range I can get out of it. For my yard, and the ball fields across the street it's been great.

Amazon $14 Monitor

Amazon $12 Tripod

$10 eBay 5.8ghz RX

$6 Amazon LCD Voltmeter

I power the unit with an Infinity 1300mah 11.1v LiPo battery that I already had, but any cheap 3s LiPo will do the trick.

The only soldering necessary for this build was to make a pig tail with an XT60 for the battery, and a couple JST connectors for the monitor, voltmeter, and receiver. Everything else is plug and play. In fact, for those that aren't comfortable soldering, you could use wire nuts, or crimp connectors and not have to solder anything.

I plan on upgrading the antenna with an Aomway clover leaf in the near future, but as of right now I'm pretty pleased with the way this thing performs for what I have invested.

I will post a few more pics of how I have it all hooked together ASAP. For now here is a pic of the completed build. Feel free to ask any questions you might have if you're looking to build something similar.

Happy Flying!!
Posted by fastmax | Apr 07, 2018 @ 05:45 PM | 4,603 Views
Usmile HSK5 220mm budget FPV Racing Drone Build. All parts available on Amazon.

With warm weather moving in, those of us that live where it snows half the year, will finally be able to get outside and do some flying without freezing our butts off

I've decided to put together a budget 5 inch quad to do some park flying with this spring. I've put together a list of most of the parts I've used for my build. I had some Holybro 2205 2550kv motors, and 30A ESC's in my boxes waiting to be used on something, so below are the parts I'll be using with those. I know not everyone has motors, and ESC's lying around, so I've also added some budget options for those as well, in case anyone wants to do a similar build.

For anyone that has looked at this frame on Amazon, and wondered about it, I am very happy to say that it is an extremely nice frame. The assembly instructions are easy to follow. The frame kit includes all necessary hardware, as well as a carbon protective plate for the battery, a foam pad for the battery plate, and a nice battery strap. It is also solid as a rock once it is assembled. I have to say that I am really impressed with it.


Flight Controller








Everything listed above is Prime eligible, so Prime members can put together this great performing 5 inch quad for under $145 with free 2 day shipping. Obviously you will still need to add a receiver to match your radio, but I'm not...Continue Reading
Posted by fastmax | Apr 04, 2018 @ 11:36 PM | 5,164 Views
There's a new 3D printer on the block!

NOTICE-The product description on the GB site says that this printer has a heated bed. That description is incorrect. The board has connections for a heated build plate, however a heated plate is NOT included in the kit.

EDIT-My printer arrived with a bad X Axis stepper motor. For anyone else that may have experienced the same thing the replacement motor can be found here.

The Hoony H8 has a 210x210x240mm print area, and is designed to be an easy to assemble kit, that offers high precision printing, and faster than standard print speeds.

So, how does this printer actually perform compared to the competition? Let's find out.

For starters, you get a kit that has some assembly already done for you from the factory. There is basically a structure to assemble, and some cables to plug into their designated connectors on the control board. There is an assembly video, a manual, and some sample print files all on the included micro SD card, so the process is pretty straight forward, even for beginners.

So far I am pretty impressed with the quality, and design. Now lets see if it's capable of producing the kind of print quality we've come to expect from printers in this price range.

Check out the pictures of the general assembly process. I will update this post with more pics, and info as soon as I get the printer tuned and running.

Please don't hesitate to ask any questions you might have. I am happy to help when I can.

Stay tuned for...Continue Reading
Posted by fastmax | Mar 23, 2018 @ 10:12 AM | 5,628 Views
Edit-6/8/2018 Right now this little racer is on sale for only $69.99 Click me to purchase.

Wow! Things sure have changed in the past year or so. Not too long ago, many of us were spending $70-$80 on small brushed FPV racing drones. Today, you can get brushless racers, with much better electronics packages for around the same price.

The new Zing 110 is a perfect example of one of these inexpensive, yet nicely equipped brushless micro quads. This little racer is an excellent model for pilots that have been flying brushed quads, and are ready for an increase in power, and speed, or for pilots that want something small enough to fly around the backyard, or small park without spending too much.

For $85 you're getting a pretty nice package. At the heart of the quad is the popular Flycolor Raptor S-Tower F3 FC with OSD and 12A 4 in 1 BLHeli-S 2-3s Dshot ESC, paired to some 1104 4300kv motors. For FPV duty you get what looks to me like the KingKong/LDARC Q25 25mw mini 5.8ghz VTX hooked to an 800TVL 1.6mm CMOS camera. The package also includes two full sets of KingKong 2345 props.

The quad arrives with Betaflight 3.1.5 firmware which works perfectly fine, but for those that want the newest firmware the Flycolor FC has a boot button, making flashing new firmware quick, and easy. They even give you a set of prop guards for those that prefer to fly with them.

All in all I am pretty impressed with this little quad. It amazes me how far this sector of the RC hobby has come...Continue Reading
Posted by fastmax | Mar 22, 2018 @ 12:13 PM | 5,521 Views
EDIT-5/28/2018 Now on sale for only $125.99 Click me to order.

FuriBee has been a bit hit or miss lately. They've had some excellent models, and they've had a few models with some pretty serious issues. It looks like they are redeeming themselves with this new Geniuser 160 though, as this drone is great, and has a lot going for it.

For starters they've equipped this quad with the excellent Omnibus F4 flight controller with OSD. They've given it a 4 in 1 BLHeli-S 28A ESC running DShot, as well as a 2.1mm 800TVL CCD camera, and a VTX with 0mw / 25mw / 100mw / 200mw output settings. You even get a buzzer, and a programmable LED light bar. The real star of this show though is the huge 1506 3400kv motors, swinging Gemfan 3052 props.

Available as an Frsky BNF, or as a PNP model. This quad has loads of thrust on 4s, but also flies very well on 3s. Flight video on both voltages coming in just a few. For now, check out the pics, and be sure to ask any questions you might have.

Happy Flying!!

First LOS flight on Tattu 650mah 75C 4s

FuriBee Geniuser Tattu 650mah 75C 4s First Test Flight (3 min 31 sec)

3s flight on Goaneng 550mah 80C

FuriBee Geniuser 160 Gaoneng 550mah 80C 3s Flight (2 min 59 sec)
...Continue Reading