Hi, I have and fly this plane My dad left me ... But not sure what it is.
Pretty sure decals are not for this model either.
Perhaps a Miss 2 ? << but they have built up fuselage's
Has Strip ailerons / rudder / elevator / motor
Also, the front of the nose Windscreen forward is built up balsa NOT plastic like in the miss 2.
Also Solid balsa fuselage with formers doubler's etc. and a Solid balsa Rudder
Any help appreciated.
Pretty sure decals are not for this model either.
Perhaps a Miss 2 ? << but they have built up fuselage's
Has Strip ailerons / rudder / elevator / motor
Also, the front of the nose Windscreen forward is built up balsa NOT plastic like in the miss 2.
Also Solid balsa fuselage with formers doubler's etc. and a Solid balsa Rudder
Any help appreciated.
Comments (3)
Add Comment
This is a ford tri-motor....I would not want to have been the co-pilot on this 1 
| Ford Tri-motor aerobatics Video #1 (1 min 40 sec) |
Ever build a plane and wonder where the CG is supposed to be? Or have a model your flying...but it just dosent feel right?
Dusted off a Old model..changed motor/battery etc....but Can't remember where the CG was
Tired Of Guessing where the CG is SUpposed to be??
Well......I found this Site VERY useful Enjoy...
Has Many other Interesting things there too
http://www.geistware.com/rcmodeling/cg_super_calc.htm
Dusted off a Old model..changed motor/battery etc....but Can't remember where the CG was
Tired Of Guessing where the CG is SUpposed to be??
Well......I found this Site VERY useful Enjoy...
Has Many other Interesting things there too
http://www.geistware.com/rcmodeling/cg_super_calc.htm
Ok finished today...seems my battery is going to have to go on the wing 
as it came out a tad nose heavy...i think the motor is larger than it was designed for...but thats ok..I was also able to put a 3s1p 40c 1800 lipo on it.
I set up flapperons...but not sure if I will even be able to use them on a flat wing..we will see...als lots of aileron throws.
took it for a taxi test infront of the house..Taxie's Real nice...so, next will be Maiden...still been too windy here lately.
the finished photos below-------------...Continue Reading
as it came out a tad nose heavy...i think the motor is larger than it was designed for...but thats ok..I was also able to put a 3s1p 40c 1800 lipo on it.I set up flapperons...but not sure if I will even be able to use them on a flat wing..we will see...als lots of aileron throws.
took it for a taxi test infront of the house..Taxie's Real nice...so, next will be Maiden...still been too windy here lately.
the finished photos below-------------
...Continue Reading
Ok.. this is part 3 of my mini build blog of the MyRcDesigns.com 44" Profile Spitfire.
Very close to finishing it...just need to add electronics
enjoy...and hopeing someone else out there has 1....and will post on how it flys..and any mods they might have done
how do I get my photos to show on the blog page like others do??
mine can only be seen if you press Continue Help please ...Continue Reading
Very close to finishing it...just need to add electronics
enjoy...and hopeing someone else out there has 1....and will post on how it flys..and any mods they might have done
how do I get my photos to show on the blog page like others do??
mine can only be seen if you press Continue
Help please ...Continue Reading
-
Views: 130
Got My New motor from MyRcDesigns.com in 2 days...this one allowes the adapter to be mounted!! GREAT cust. service..Thanks !! -
Views: 110
Rear of motor.. x-mount and Collar attached -
Views: 111
The Adapter that Lines up with mounting holes. :) -
Views: 101
Ok....time to apply the Decals...first I am seperating the decals from the large sheet of them. They have a Clear sheet over the top..and regular decal paper on the back..very nice for applying them.. -
Views: 102
This is the stab. with these type decals..you remove the back..make sure they are sticking to the clear part...carefully center them ( as they DO stick like Tape) then press from the center out..and rub them down...Carefully remove the clear sheet...lay -
Views: 108
-
Views: 115
Pull clear back over the decal -
Views: 100
They said to iron edges....but I went ahead and ironed the whole thing..worked OK for me.
Sticky:
MyRcDesigns - Sptfire 9mm 44in
...Well I was TAKEN advatage of at the EXPO !!
Just got home from the expo in Onterio.....A Very Very shaddy place.......one vendor actually HYPNOTIZED me
I was just walking by...minding my own buisness THEN- accidentally I made EYE contact with him
End Result.....I now have a Dynam F4U-Corsair....Whaaaaaaaaaaa.......Snivel snivel..... ( No Clue what happened) But If I ever see that guy again.....Im going to give him a peice of my wifes MIND!! ( I told her I won it in a raffle heheheheh.....Opps here she comes...Gotta' Go <PooF> 
Pat
Anyway..here are some Expo Photo's ( I just noticed..All the People I bought stuff from..I took No Pix..was too buisy Buying..but sure wished I took those Pix..B4 any others) The Person in some of my photo's is My Flying friend Jeff.
...Continue Reading
Just got home from the expo in Onterio.....A Very Very shaddy place.......one vendor actually HYPNOTIZED me
I was just walking by...minding my own buisness THEN- accidentally I made EYE contact with him
End Result.....I now have a Dynam F4U-Corsair....Whaaaaaaaaaaa.......Snivel snivel..... ( No Clue what happened) But If I ever see that guy again.....Im going to give him a peice of my wifes MIND!!
( I told her I won it in a raffle heheheheh.....Opps here she comes...Gotta' Go <PooF> Pat
Anyway..here are some Expo Photo's ( I just noticed..All the People I bought stuff from..I took No Pix..was too buisy Buying..but sure wished I took those Pix..B4 any others) The Person in some of my photo's is My Flying friend Jeff.
...Continue Reading
-
Views: 120
-
Views: 122
I Do love Corsairs !! this was Banana's HUGE 1 -
Views: 135
again Banana hobby...and HUGE..I never knew how BIG some of these really are. -
Views: 101
these are some Large profile models...I actually bought one..But not one of these...Mine is a Profile Spitfire 9mm 44in from a VERY nice husband/wife team running MyRcDesign.com very cool model so check out their website...They are still small enough -
Views: 115
-
Views: 127
A Very Cool Slow stick Mod. has a ton of aftermarket mods on it. -
Views: 133
Counter rotaiting motors even. -
Views: 119
this is just a tab...so i remember to post my builds here ...and not in fourms
