I designed this in sketchUp from mainly 2020 and 2040 aluminium extrusion, the cut area is 430mm x 930mm,
duel Nema 17s on the Y axis, a single Nema 17 on the X axis and a Nema 23 on the Z axis. The tube is 80-100w.


The laser cutter is separate from the frame which is made from 2020 extrusion and covered with multiple 3mm MDF panels.
Ruida controller.

DIY laser cutting(40mm/s @ 30%) (0 min 59 sec)

1/5.5 scale 35cc +

1100mm WS

1758mm WS 20cc engine.