Hi

here's a little racer I threw together to show my friend how easy it is to build these planes:

SS

Teaser pics of the 3D render

Drawn and rendered using solidworks.

SS

EDIT: The plans are in this thread: https://www.rcgroups.com/forums/show....php?t=1575326

title says it all...
NOTE: ignore the waaa...ay off scale prop

enjoy, SS

My "other" planes plus my helis...Continue Reading

the rest of the pics:...Continue Reading

here are the pics of my previous builds. All of the pics I had in the X-twin/aeroace mod thread have been deleted by me (sorry)
So I thought I can just post them in my blog

...Continue Reading

well here is another cartoon plane I have made...The J-3 cub
it uses an X-twin RX and a 40mah lipo and 2 havoc heli 4mm tail motors and 2 picooz tail props and 1mm or 2mm or 3mm depron.
my version is made with 3mm depron and has 2 pieces split bamboo skewer as a fuselage reinforcement on the sides of the fuse
Enjoy!

SS

here is my first blog entry...here are some plans for my newest tiny design,the micro cartoon cessna skyhawk...it can fly easily in our living room and goes nice outdoors too...it uses an X-twin RX and a 40mah lipo and 2 picooz 4mm tail motors and 2 picooz tail props and 2mm depron.

well here are the plans...enjoy!

SS

EDIT:I have made some PDF plans and took some pics of it

here is a little sth I made. it uses X-twin guts and is made completely out of balsa except for the carriage which should be made out of 3mm depron
also you have to add a penny to the nose for proper flying

happy flying

SS