Archive for January, 2013
-
Views: 694
Jose5X5's broken 4mm strut pin. -
Views: 702
My suggested options for a 5mm fix -
Views: 684
The two 5mm pins I made up. -
Views: 622
Specs for the 5mm pins. -
Views: 646
Because of the larger 5mm bore in the strut, a 4mm long grub screw will work with adequate clearance. -
Views: 685
The oem PZ-312 E-Tract. -
Views: 665
Another view of the oem PZ-312. -
Views: 663
The E-Tract wing pocket.
Comments (19)
Add Comment
-
Views: 504
Re-hinging of the elevator. -
Views: 445
Re-hinging if the vert. stab. -
Views: 373
The FMS control horn/linkage package. -
Views: 406
The beacon light mounting fixture. -
Views: 421
Wire routing from the rudder to the stab. -
Views: 434
Wire routing within the tail wheel bay. -
Views: 440
The final assembly of the beacon light -
Views: 422
Another view of the beacon light.
Sticky:
FMS V7.5 P-51 BBD: The Cockpit!
-
Views: 350
UP-DATE 3/19/2013: This shows the weak section of the cockpit. -
Views: 307
UP-DATE 3/19/2013: The 1/16" ply supports I made for each side. -
Views: 382
The pilot was screwed from the beginning! -
Views: 411
That's gotta hurt! -
Views: 412
The canopy locking ball. -
Views: 378
The cockpit locking socket. -
Views: 409
Nicely detailed dash panel. -
Views: 437
What the sliders look like when they're cut out of the cockpit frame.