Posted by Reckless_fpv | Jun 11, 2019 @ 12:31 PM | 947 Views
metal head fpv freestyle (6 min 31 sec)

Posted by scousethief | Jun 11, 2019 @ 08:59 AM | 3,493 Views LINK

ZOHD Orbit NEON: Presentation video (5 min 20 sec)

Order Price: $139.99

The 900mm ZOHD Orbit has been around for a while. Her wonderful stability in flight combined with a second to none portability and innovative assembly system makes her one of the most desirable airframes for any FPV lover: Hundreds of wonderful reviews online testify about this fact.

Of course, we could have just revamp her under our very popular MKII format, make it heavier, larger, more complicated to setup Instead of all of that, we went the other way around: This wing is already tons of fun, how can we take it to the next level, without compromising the fun factor?

Doing it at night!

ZOHD Orbit Neon is the world first snap-n-fly portable FPV wing with built-in LED for night flying. It is easy to hand launch and fly super stable, the Orbit wing is very convenient to carry with because the detachable main wing can be assembled easily by plugs, meanwhile the new crash absorption system will save the plane even in a hard crash. The built-in servo structure makes the airfoil more aerodynamic and avoid damage even in a crash.

With ZOHD Orbit Neon you can have countless ours of fun. Just picture this: Turning off the LED system, will give you a super capable FPV wing, to fulfill all your expectations in first person view action. Now the sun is going down? No Problem! Turn on...Continue Reading
Posted by GroundControlRC | Jun 11, 2019 @ 08:33 AM | 1,001 Views
Test Flight #3 - Volantex Super Cub Flaperons - It's all Good ;-)

Here is a link to the Video:

Time to test the Super Cub MOD we performed by replacing the single 9g Servo with two 4.4g Servos and programming Flaperons.
After needing some significant adjustment and repair of the Landing Gear it's ready for Takeoff ;-)

The amount of Flaps I have is 10mm from the top of the Aileron to the top of the Wing.
The amount of Up Elevator Trim is 3mm.

Here is a link to Test Flight #2 that didn't end well:

Here is a link to the Tutorial for installing the Servos and Linkages:

Here is a link to the Plane:
Upgraded: New batch comes with Integrated flight control with self-stabilization function

Volantex 2.4G 4CH V765-2 765-2 Super Cub 750mm Sport Park Flyer RTF

Here is a link to the 4.4g Servos used in the Tutorial:

Turnigy TGY-1440A Analog Servo 20T (V2) 0.8kg / 0.10sec / 4.4g

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook
Posted by nagas | Jun 11, 2019 @ 05:46 AM | 1,246 Views
This Tilt-Engine aircraft was a collaboration between RickP and myself.

Available in two versions:Canadian Force Rescue and US Marine..

Derived from a model created by Helijah and posted on Sketchfab.

Further details to follow.

The model can be downloaded here.
Posted by Bill M - RC | Jun 11, 2019 @ 04:49 AM | 1,722 Views
Hi fellow rc pilots & rc enthusiasts

NEW MJX Bugs 4W B4W Review - 5G WIFI FPV GPS Foldable RC Drone with 2K Camera on a Single-axis Gimbal. This MJX Bugs 4W review includes Flight, Functions, Features, WiFi FPV Range, Camera, RTH, Flight time, Optical & Ultrasonic sensor tests.

You can get this NEW MJX Bugs 4W B4W 2K 5G WIFI FPV GPS Foldable RC Drone here now:

Get this NEW MJX Bugs 4W B4W 2K 5G WIFI FPV GPS Brushless Foldable RC Drone with one battery for only $169.99 using coupon code: KSVARPFI here now:

7th Anniversary Promotion Sale on here now:

MJX Bugs 4W B4W Review Part II - Flight, Functions, Features, FPV Range & Camera tests (25 min 24 sec)

2k [email protected] video clip here:
MJX Bugs 4W B4W review - [email protected] raw video sd card capture (3 min 5 sec)
...Continue Reading
Posted by UnknownForces RC | Jun 11, 2019 @ 04:45 AM | 909 Views
Testing video of Growler X1 1/6 2WD electric desert buggy (8S) (1 min 34 sec)

Testing videos of our GX1 buggy , guess what happened while it was falling from a 7 meter high floor.
Posted by Monkey Hobby | Jun 11, 2019 @ 04:42 AM | 846 Views
OMG 32KG Digital Full Aluminum Case Coreless Ultra-Torque Waterproof Servo For all RC Boats / RC Crawlers / Buggy / Trucks / Short Course / Truggy

Item No.: OMG-ST-32CF
Modulation: Digital

Motor Type: Coreless

Dimensions: 40X20X38mm (1.57X0.79X1.5in)

Stall Torque:

[email protected](500oz-in)

[email protected](556oz-in)

Weight: 79g(2.79oz)


[email protected]/60

[email protected]/60

Case: Full Aluminium Case

Monkeyhobby Website:
Posted by AGFrc Nicole | Jun 11, 2019 @ 03:29 AM | 884 Views
MOSCOW China Commodity Fair
Jun 18-20, Booth 415/417
AGFrc is waiting for your coming !!!
Posted by DismayingObservation | Jun 10, 2019 @ 06:10 PM | 1,944 Views
Back in 2010, I was lucky enough to review this model on behalf of RCG. Great model which, unfortunately, met an untimely demise shortly after this review was published.

Fast forward to mid-2019 for a partial return of this model to operating status, namely the engine, power switch and spinner.

The engine I got with this castoff sport plane was too large; I blogged about it not long ago and I posted its photo from that blog below.

What did it take to get this model back on the cusp of flying once more?

-The O.S. Max AX 46, glow plug and muffler from the P-40. No cost.
-A new/old Great Planes adjustable motor mount which I already had on hand. No cost.
-The newly repaired heavy duty power switch from the P-40; it had some torn wires at the receiver plug. No cost.
-The Great Planes spinner from the P-40. No cost.
-A new/old 11x6 Master Airscrew propeller given to me along with the model. No cost. Even the factory safety warning sticker was intact.
-Fuel tubing. Mere pennies.
-Mounting hardware. $2.89 from Ace Hardware.

The Thunder Tiger fuel tank which came with the model was in fine shape and only needed a new klunk line.

A new slanted fuel tank is waiting at the hobby shop for installation into the Rat Clanger. That'll make it model number five returned to operational status for very little money and only a bit of time. Flight report and updated photos to follow; I'm told it's a big, lazy and fun flyer with its 6' wingspan. We'll soon see!

My next project might be a long dormant, kit-built Great Planes Ultimate biplane, given to me with minor crash damage and originally set up as an electric. No telling which end was up; the wings have the same pattern top and bottom! I repaired the damaged landing gear a few years back, I have the parts to finish the build, so why not? A good, used K&B Screaming 48 purchased from a friend might go onto that firewall. Haven't flown that engine yet!
Posted by old4570 | Jun 10, 2019 @ 05:42 PM | 1,386 Views
1) My 1.5 meter DLG from China ( Ebay Purchase ) is ready for Chucking
2) The R4 has begun , and the wing is made from 3mm Depron sheet much like the R3 . Only this time the span is around 700mm and there is a carbon ( spar ) , so it can be a true DLG
3) The weather still blows ( it's windy and at times raining ) Blue sky as I look out the window , but another windy day ( Yesterday was gale force )
4) My car stopped working for a week , I thought the fuel pump had died , but the car had simply flooded . And it took over 30 minutes to get it started with roadside assist here with a heavy duty jump starter .
5) I did buy another 1.5 meter DLG which arrived during the week . ( It was a un used kit - not sure how many years old - but the price was right ) Amazing how people want top $$ for old damaged gliders . ( That DLG shortage in Oz )
6) Ordered a kit from GB , they sure have jerked me around with it . Once I get my refund , ill just have to buy the kit from a Ebay seller .

Hopefully today , I will find the time and inclination to sand the R4 wing , then glass the middle ( join ) and iron on some 10 thou laminating film . Once the wing is completed I can start on the tail / boom / fuse . ( Yeah , that's sort of the order I do on a new build ) = R4 wing in more detail !
Posted by rcheli168 | Jun 10, 2019 @ 04:22 AM | 937 Views
2019 Aomway HD588 V2 10 Inch 5.8G 64CH Diversity FPV HD Monitor 1920 x1200 with DVR Build in Battery For RC drone

Aomway HD588 V2 10 Inch 5.8G 64CH Diversity FPV HD Monitor 1920 x1200 with DVR Build in Battery For RC drone
Product Details
Brand Name: Aomway
Item Name: HD588 Monitor
Frequency: 5.8G 64CH
NTSC/PAL auto selection
Display: 1920 x1200p full HD
FOV: horizontal 85/85(Left/Right),vertical 85/85(Up/Down)
DVR Resolution: 1280*720P
Recording: auto save
Latency : 90ms
LED backlight
Sensitivity: 95dBm
Brightness: 450cd/m2
Auto brightness:yes
RF receiver switch:OFF/ON/L/R
Spectrum analysis:Yes
Contrast: 1000 CR
image rotation:360
Power consumption ≤ 9W.
Wide Voltage : 8~28V
Input Voltage: 12V 2A
Charger: 15V 2A
Build in Battery: 2400mah Li-ion battery
Working Time: about 100mins
Dimensions: 246 x 172 x 20mm.
Operating Language: 8 different languages
USB for multimedia displayer and firmware upgrade.
Standard 3.5mm AV in /AV out port.
Standard 5.5*2.1mm DC in and DC out port.
Support 1080p HDMI in display.
Support Max. 64G TF card.
OSD menu: Voltage, Channel, RSSI, Battery Status.
Item Packing
Monitor x 1
Antenna x 2
Charger x 1
AV Cable x 2
User Manual x 1
Posted by UnknownForces RC | Jun 10, 2019 @ 01:01 AM | 974 Views
Ultimate Forces RC GX1 Version 2 REVEALED! (9 min 51 sec)

this is a testing video about our "GX1 Version 2" made by one of our vendors.
Posted by wattechighland | Jun 09, 2019 @ 11:44 PM | 1,306 Views
メンテやバッテリー交換で上下ハルは頻繁に脱着するので上下舵のズレを吸収修正してくれるよう に考えた。
ニチモ 伊19 上下縦舵の連動 (1 min 21 sec)

Posted by DoubleEagle | Jun 09, 2019 @ 11:20 PM | 1,154 Views
It is coming very soon
1:8 scale, very decent made and of lower price range.
GUYS keep eyes open!
Posted by Cabledawg1 | Jun 09, 2019 @ 10:30 PM | 1,050 Views
4S Lipo's I sold
Posted by RoyAceWings | Jun 09, 2019 @ 08:52 PM | 834 Views
Hi Everyone
Hope everyone is enjoying the Flying Season. It's been great. We have added a few more products to our line of AceWingCarrier product list. We now also have a Propeller bag to put your propellers in. They are lined and keep your extra blades from being chipped and dinged before you get that big bird in the air. Sizes are 20-27" and 27-34" There a nice option if you are looking for something to put your Props in. We also make 3 blade and four blade Prop bags and our Non slip blade covers you can just slide over your props that are on the Plane already. All our products are made in the USA.
Name: RC Propeller Bags.jpg
Views: 0
Size: 123.5 KB
This is the picture of some of the prop bags.
Thank you too all of our customers around the world, We enjoy helping you secure your planes in safe and lasting Wing bags of all kinds and thank you for your support and kindness in working with us through the years.
If there is anything we can help you with please contact us at Ace Wing Carrier
Posted by condor12 | Jun 09, 2019 @ 07:38 PM | 839 Views
10th flight of the Fox. This was a test of the new Bigaole BGP 6G RTH stabiliser. Worked well.

Fox 10th flt (5 min 50 sec)

Posted by condor12 | Jun 09, 2019 @ 07:33 PM | 842 Views
When it works!

Pitts inverted spin (0 min 8 sec)

Posted by condor12 | Jun 09, 2019 @ 07:28 PM | 850 Views
Pitts at Duffield, from nose cam aspect

Pitts nosecam 05Jun19 (4 min 52 sec)