Posted by DutchRC | Today @ 12:05 PM | 158 Views
Halloa RC people

a while back I did a review of the (then new) ISDT Q6 Nano charger which has since then been my "field charger"..
That does NOT mean however that it's at all perfect :P

So I wanted to try it's slightly bigger brother.. the Q8 to see how much more you get for the extra $$

And I think it was wurth a video in case you are looking for a handy charger to stick into your backpack...

ISDT Q6 Nano vs Q8 ? What is the Charger for You ?? (13 min 31 sec)

Posted by herreraa | Today @ 08:29 AM | 578 Views
Finally compleated the mini Frog. The receiver (Mx-RX62H)brick detached after first day of maiden , when i was regluing it , glue got into the gear and the servos do not work anymore. I had a replacement ( a receiver from a Blade heli mxc2) , i did not i neded to disable the gyro, so after looking for help (thread)in the forum i was able to do it. I have not done any flight with the new brick yet.

Mini Frog Maiden Flight Front yard RC plane scratch built (2 min 15 sec)

Posted by Tazkiller85 | Today @ 06:38 AM | 761 Views
Yep Les Amis,
Wednesday live fever ! Ne ratez pas l'outro, lol .
Comme promis, je teste aujourd'hui les deux produits phares de chez TRONSMART, les oreillettes APOLLO BOLD et l'enceinte T6 Plus Upgraded. Pour résumer simplement, il n'y a pas grand chose à reprocher à ces deux produits. Les oreillettes Apollo Bold, "haut de gamme" de la marque, proposent de nombreuses options et sont largement à la hauteur de certaines marques prestigieuses pour un prix bien moindre ! LaT6 Plus Upgraded, elle, propose une très bonne qualité sonore et également pas mal d'options d'ergonomie qui en font une excellente enceinte nomade. En bref, il faudra compter sur la marque TRONSMART à l'avenir en matière de son ! ... Bon Film et merci à tous pour votre soutien .

Tronsmart Apollo Bold & T6 Plus Upgraded - Review Test Démo - Les meilleurs de la marque ! (24 min 50 sec)

NOTATAZ : 18/20 Une marque sérieuse !

- Site Tronsmart :
- Oreillettes Tronsmart Apollo Bold :
- Enceinte Tronsmart T6 Plus Upgraded :
- T6 Plus Upgrade :

- Ma page BANGGOOD ( gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) :

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 RC et ACCESSOIRES (remis à jour régulièrement, en utilisant ces liens, vous aidez la chaîne, ) :

- Si Vous voulez aider la chaîne...Continue Reading
Posted by Deerslayer | Today @ 06:13 AM | 803 Views
I am new to having a blog, although I have been in RCGROUPS since 2006.

For many years, I have administrated a Forum for my local RC Club. That Forum is now being wound down.

There are a number of articles which I, and (a very few) others, have placed in there over the years. I would like to preserve and make these available to others, both in my Club and perhaps elsewhere. We also have a number of pictures and links to YouTube and Vimeo videos to be preserved.

I hope that this is not only appropriate but also of interest and value to some others. This hobby is addictive, sometimes frustrating but always enjoyable. I like helping and sharing ideas with like-minded individuals.

I am a retired Systems Engineer (B.A.Sc., Mechanical Engineering, 1970 - i.e., an old guy) who spends a great deal of his time creating, building and flying RC models of various kinds and sizes. I have been doing this for over 40 years, as well as having about 20 years (800 hours) of flying and instructing in full scale gliders. My interests transferred to my son, who is a production test pilot for a major aerospace firm as well as an RC modeller of some 35 years, having soloed at age 7, instructing a couple of years later.

I live on a large island, at a location called Preston Cove, ours being the only dwelling on that large bay. I can walk out my door, down to the water (or ice) and fly or walk out into the front yard to fly small things and dodge trees. No nearby neighbours to annoy! However, I get the most out of travelling to our Club of 80 to 100 Members of all shapes and sizes and ages for good flying and comaraderie, any day of the week and throughout the year.

I refer to the mess wherein I build and repair models as my Cave. (My patient wife has alternate names for it.)

Hence the Cave on the Cove.
Posted by DumbthumbsFPV | Today @ 03:53 AM | 1,047 Views
Preview is up. BTW my channel is NOT monetized! If you see ads then get ublock plus and adblock plus and never see ads on YT,FB again!
This is my hobby and the channel is for fun not profits.. no affiliate links anymore either.. done with it.. I have a job that pays well..

Posted by silentsurfer | Yesterday @ 11:44 PM | 1,704 Views
...the mags had rotted on this blue wonder,
i posted it in Electric Motor Design and Construction awhile back but got little interest or comment,,
and i didnt recognize anyone over in that neighborhood anymore,,
it was LOCKED-up pretty tight...

ive a fondness for em, great little 3D foamie motors, even rewound a cpl yrs ago...
thought i'd take a stab at it...

Motor Template from GoBrushless Rotor Calculator...Continue Reading
Posted by Band1 | Yesterday @ 11:43 PM | 1,692 Views
Go to the large scale cars forum to see
the entire truck painted....Continue Reading
Posted by old4570 | Yesterday @ 05:02 PM | 2,791 Views
XK A160 J3 Low and Slow (5 min 16 sec)

Flying the J3 as slow as I dare ..
After the flight the battery still had 75% , so you know it was a low throttle flight .

I trimmed the LE Slats at the wing tips .. I am not sure , but they may have been affecting the Ailerons ( Making it harder to bank / turn )
J3 feels much better after the Slats being trimmed .

It flies slow .. Where was the death spiral ? I even stalled it , and you can hardly tell the J3 stalled .
I put the blame on the flight control board , because without it . ( There is no death spiral and stalls are so gentle they are hard to notice )
Posted by LuckyManThe2nd | Yesterday @ 02:50 PM | 2,712 Views
Whats up guys! My name is Dirk Romanio, current age - 25 years old. I am working as a Director of digital gaming company.
We started in 2019 year and we are going further! Here is our website -
My lovely life hobbies are sports,social books,self-development,Techno music and gaming. Also I like to go for hiking and travelling!
Not a long time ago I have finished my 2nd academic year in University, I am studying for a designer. But that is my second higher education! First one is connected with lawyers.
Also I am thinking to go for streaming career, but seems like all e-sports gaming is not feeling well. But anyway I need to look for a nice platform to work with, my lovely genres are shooters,arcades and football simulatos.
I am fond of old movies, especially where Robert De Niro or Al Pacino are featured!
Good luck and thanks for the opportunity to be the part of that big community!
Posted by Number_6 | Yesterday @ 12:50 PM | 3,120 Views
After my first video... knew there was a problem
because the plane was at the far top of the video,
and disappearing sometimes because the camera
was not aimed high enough. Shown is my 20 degree
riser block solution for keeping the model centered
in the video frame.

Mobius shows a hat rig on their website
without an angled visor mount.

So, after a few tries, I found a 20 degree
wood block, through bolted to the Mobius
mounting plate worked best for me.

Hundreds of videos later and this is my current
preferred setup.

The Mini was added using velcro. I can fly
the Mini on the plane or shoot a backup video
from the hat. The settings can be changed in each.
You could have the mini doing time lapse,
wide angle, zoom, or other settings.

All hats/visors fit differently so best to
calculate each one separately.
Posted by rickp | Yesterday @ 08:14 AM | 3,392 Views
I've always wanted a small scale Spitfire, and finally had the bright idea to build one using the guts of my trashed UMX Yak-54 180.

Wouldn't seem to take too much work to create a profile Spitfire of the right scale and transfer the guts of the Yak-54.
Biggest complexity, I think, might be turning off the AS3X, or perhaps if I orient things correctly in the Spitfire it wouldn't make a difference.
Time will tell.

Time to dig out the Yak, take some measurements, and draw up a profile Spitfire.
Unless, of course, my EZ power plant shows up tomorrow, then all bets are off.

The EZ power plant did show up, so this project was shelved for a few weeks while I built the EZ F7F.
But I'm back on it now, and have created Phoenix models of both the Yak and the profile Spitfire to compare the flying characteristics.
Based on that, the Spitfire seems to fly fine at the same wingspan and weight as the Yak.
Considering making it a bit bigger, though, to give it more presence in the air. Need to give this more thought.
Next step is to generate plans for the Spitfire and then carefully transmogrify the Yak.

UMX YAK 54 vs PROFILE SPITFIRE (1 min 27 sec)

Posted by GroundControlRC | Yesterday @ 07:52 AM | 3,402 Views

XK A160-J3 Skylark 3D/6G System 650mm Wingspan EPP RC Airplane RC Plane RTF - Review Part 2 - Info, Tips, Test Flights, & Conclusion

XK A160-J3 Skylark Cub RTF

Banggood GCRC

Here is a link to the Video:

A little Plane with a lot of details and cool features ;-)

Trainer Planes - My Top Picks for Trainer Planes for New Pilot's ;-)

Spare Parts (I believe the Parts for the XK A430 Edge will work with this Plane as per discussions on Banggood)

XK A430 2.4G 5CH RC Airplane Spare Part 7090 7x9 Propeller

Tip on Balancing Props when you can't use a standard Prop Balancer:

You Can Help Support Us By Using Our Affiliate Links To The Products Above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #XKA160 #XKJ3 #XKSkylark #J3Skylark #banggood

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

See Us On Youtube | Patreon | RCGroups
Posted by Quartermaster | Oct 26, 2020 @ 11:10 PM | 4,134 Views
When I returned from my hiatus from the hobby in 2015, I discovered former major vendors were gone, new ones had arisen, and not surprisingly, one giant fossil was still here (Merriman….grrrrrrr!)

To make a long story short, my trusty D&E Miniatures WTC-3.5 suffered from spider cracks from storage in less than pristine conditions, and was subsequently leaking like a sieve (20-30cc in 10 minutes). This cylinder operated 3 of my boats with it’s adjustable ballast tank.

I freakin’ loved that thing. (and I do love Dave lol, rat bastard). He actually told me he thought I was the only one using that crank adjusted ballast tank sharing it on 3 models

But the electronics were outdated, and Dave wasn’t looking to rehash a 20 yo design, especially since he now worked for “the man”. Hey I dig it, I’m surprised any vendor can survive alone for long in such a niche market.

But I decided I was going to need to do more on my own. Focus on what works for me. After all, I had seen all sorts of approaches, done a few myself. Plus after stepping back for a while and entering the world of 1:1 scale Sailboat ownership, I returned with a new set of skills that can easily transfer over, most of which is surprising myself at what I’m capable of, second is that consistency and standardization is the name of the game.

I want to rely more on off the shelf products, one that’s not going to disappear when a vendor does.. I am going to standardize my approach. Pick what I like, and...Continue Reading
Posted by alex_nikiforov | Oct 26, 2020 @ 11:02 PM | 4,074 Views
Foxeer Cat 2 Micro 1/3 CMOS 1200TVL StarLight FPV Camera Low Latency 4:3/16:9 NTSC/PAL Switchable Support OSD

Foxeer Micro Cat 2. Почти как зрение кошки. (10 min 9 sec)

Link: Foxeer Micro Cat 2
Posted by jmxp69 | Oct 26, 2020 @ 07:50 PM | 4,336 Views
Used to pushing sticks in and down to arm your model? This video shows how to do it for models without a flight computer.
Edit: Using the sticks as the source on the logical switches avoids the rates caveat I mentioned in the video.

OpenTx Tutorial • Quad Style Arming (Throttle Lock) • [Intermediate] (16 min 0 sec)

Posted by lawrence4 | Oct 26, 2020 @ 04:21 PM | 4,704 Views
Update OpenTX Firmware to 2.3.10
Update 4in1 Firmware to V1.3.1.69

OpenTX Firmware update:
Copy new firmware to TX SDCard then flash update.
Update SDCard content for 2.3.10

4in1 Firmware update:
If you don't need/want to customize the multi module firmware then you can use pre-compiled binaries available here:

To just use the firmware file selector here: .

Flashing from the Transmitter
For radios running OpenTX, there is an option to flash a precompiled firmware file to the multiprotocol module:

OpenTX: using the SD card browser

What you need:

A precompiled multiprotocol firmware file (.hex for Atmega328p or .bin for STM32)
A Flash from TX bootloader installed on an Atmega328p or STM32 multiprotocol module
A means to get the firmware file onto the transmitter's SD card
OpenTX 2.3.3 or newer
Copy the firmware file to the radio's SD card - it doesn't matter where you put it
Switch the radio on normally and use the radio SYS menu to locate the file on the SD card
Highlight the file and press the ENTER button
Choose Flash internal module or Flash external module as...Continue Reading
Posted by Jack Crossfire | Oct 26, 2020 @ 03:26 PM | 4,796 Views
The 1st prototype had no showstoppers, just a few tweeks. The speed control buttons would be easier to reach if they were side by side. This would allow the power button to go in back. The height transition was messier than hoped. Throttle needs to rotate 30deg north. Pinky hook should extend the full height. Speaker hole could be smaller. It's heading to a dogbone.
Posted by Theshemdogg | Oct 26, 2020 @ 02:23 PM | 4,836 Views
Macross style
The stickers were peeling on the bottom. Im always looking at it from the bottom so... pain chop.
The jj is next