kopterheld's blog View Details
Posted by kopterheld | Today @ 04:05 PM | 2,112 Views
Eachine Novice-IV a complete, ready-to-fly set with everything included


Code: BGEACHINE10 - https://www.banggood.com/custlink/KGDRoSVDVq
Novice-IV is a ready-made flight set with 4 inch GPS Quad, Radiomaster TX12 transmitter, EV800DM FPV goggles and batteries. F4 FC 25a ESC's, 1404 KV2750 motors, Caddx Baby Ratel2, 25-400mW VTX, active buzzer, GPS. Very good range with over 1000 meters.

My video with EN subtitles
Eachine Novice-IV super Long Range RTF Bundle (16 min 39 sec)



With GoPro 8 Lite less 250g

...Continue Reading
Posted by kopterheld | Jun 09, 2021 @ 03:56 PM | 19,482 Views
BetaFPV Beta95X V3 with 1404 4500KV motors upgraded and a flight with GoPro Hero 6 Black Lite.
Video with EN subtitles
Beta95X V3 Super 1404 Motor Upgrade (6 min 19 sec)


Beta95X V3 now with better 1404 4500KV motors and D63 3-blade props, Caddx Nebula Vista module, F4 FC 20A ESC's, bracket for the new SMO 4K camera, weight 116.7g, battery 450mah 4S

BetaFPV 1404 4500KV Motor - http://bit.ly/BF1404
Beta95X V3 - http://bit.ly/Beta95X3analog
Beta95X V3 HD - http://bit.ly/Beta95X3hd
Insta360 SMO 4K - http://bit.ly/BetaFpvSmo4K
F4 FC 20A V4 - http://bit.ly/BetaFPVF4V4
Use the GiftCARD for 5% off with Coupon: GiftCARD - http://bit.ly/BetaFPVgc
Get 5% Coupon from BetaFPV - http://bit.ly/KHBetaFPV

My latest PID, Rates settings from Beta96X V3 HD digital with 1404 Motors , active RPM filtering,
# with Warning in the DJI FPV Goggles OSD using craftname check 
# https://github.com/mbilozub/fpv_cust...taflight/4.2.8
# and BlueJay 0.13 48k ESC's FirmWare
# 1404 Motors
# Betaflight 4.2.8
# Backup from 2021-04-16
# only PID and filter setting without resource, beeper, serial, osd
set gyro_lowpass2_hz = 325
set dyn_notch_width_percent = 0
set dyn_notch_q = 250
set dyn_notch_max_hz = 350
set dyn_lpf_gyro_min_hz = 260
set dyn_lpf_gyro_max_hz = 650
set rc_smoothing_auto_smoothness = 20
set dshot_bidir = ON
set small_angle = 180
set thrust_linear = 25
set gyro_rpm_notch_harmonics = 1
set gyro_rpm_notch_q = 800
profile 0
set dyn_lpf_dterm_min_hz = 91
set dyn_lpf_dterm_max_hz =
...Continue Reading
Posted by kopterheld | Jun 08, 2021 @ 03:38 PM | 10,103 Views
Happymodel Crux3 3 inch 2S
AE - https://s.click.aliexpress.com/e/_A0fl93
BG - Code: BGDAVIS - https://www.banggood.com/custlink/KvGycw7Qj5
3 inch quad with only 42g for 1S or 2S Lipo, Caddx ANT 1200TVL camera, F4 FC, 5A ESC's, 25-200mW VTX. Flies super good and fast, best with 2S battery. Here I show how to set the Crux3 RPM filter under Betaflight 4.2.

BLHeli_M Configurator 1.2.0 - https://github.com/Asizon/blheli-configurator/releases
or better the new BlueJay ESC's Firmware 0.13.3 - Blue Jay Configurator 1.3.6 https://github.com/mathiasvr/bluejay...rator/releases
Crux CLI Diff BF 4.2 - http://www.happymodel.cn/index.php/2...pymodel-crux3/
Betaflight RPM Filter Tuning - https://github.com/betaflight/betafl...and-RPM-Filter
GNB 450MAH 2S - Amazon - https://amzn.to/2Nez3Ig
GNB 300MAH 2S - Amazon - https://amzn.to/2YLad6N
Turnigy 300mAh 2S - HobbyKing - http://bit.ly/nano300mAh2S35C

My video with EN subtitles
Happymodel Crux3 with BetaFlight 4.2.5 RPM Filtering
Happymodel Crux3 mit BetaFlight 4.2 RPM Filterung (11 min 30 sec)


Happymodel Crux3 Spare Part Camera Protection Canopy Cover for RC Drone FPV Racing
20210223
Happymodel Crux3 Camera Canopy
BG - Code: BGHONEY2110 - https://www.banggood.com/custlink/3GGd9bt6lt
Very durable and 1.4g lightweight camera cover for Caddx Ant cameras. Best upgrade for Moblite7 + Caddx Ant Whoop.
https://imgaz.staticbg.com/thumb/vie...c5bb78e68d.jpg

CrazybeeX v2.2 AIO FC layout diagram - http://www....Continue Reading
Posted by kopterheld | Jun 05, 2021 @ 01:36 PM | 35,406 Views
Great 26 grams lightweight GoPro 8 in the new GEPRC case to build yourself or to get ready. I think the case is better than that of iFlight or URUAV which were as 3D TPU.

My video with EN subtitles
GEPRC Naked GoPro Hero 8 nur 27 Gramm Zusammenbau (6 min 58 sec)



This is the microphone connector on the GoPro Hero 8 board


Please remove the microphone from your Gopro metal front case, but be careful. the flat cable is very thin.

...Continue Reading
Posted by kopterheld | May 22, 2021 @ 12:19 PM | 26,639 Views
You can add a GPS to your EMAX BabyHawk II HD with Softserial

First fix is to change the resource for RGB pad because it have a wrong resource A00. Set it to A15.
resource LED_STRIP 1 A15
With this fix you can now use the RGB pad for a LED Strip or for a GPS via SoftSerial (RX)


The simple way is to use for GPS the TX2 and RGB pad's if you use SBUS for your receiver.
I have tested it with the BN-220 GPS.
Here the CLI changes for the Softserial 1

feature GPS
resource SERIAL_TX 2 NONE
resource SERIAL_TX 11 A02
resource SERIAL_RX 11 A15
SAVE


GPS Sample 2 the best way to use Softserial:

If you using Crossfire at TX2 RX2 the you need another pad for Softserial TX pad.
You find a free mini pad at top, left of the STM32F411CEU6. This pad is connected to A14 from F411
Use the pad A14 as soft serial TX and the RGB pas as soft serial RX.
Here the CMD commands:
feature GPS
resource SERIAL_TX 11 A14
resource SERIAL_RX 11 A15
SAVE


...Continue Reading
Posted by kopterheld | Apr 10, 2021 @ 01:53 PM | 8,243 Views
iFlight Protek25 has 1404 motors and is a strong cinewhoop, but it can fly it without the propeller protection, i.e. as a great freestyle quad.
2021-04-10 iFlight Protek25 Freestyle MOD less 250g -
iFlight Protek25 Freestyle MOD unter 250g (4 min 30 sec)


iFlight Protek25 has 1404 motors and is a strong cinewhoop that can even carry a Gopro8. Optimally fits a GoPro8 Lite on it, which can be converted to the Lite version with the iFlight GoPro8 case.
2021-04-10 iFlight Protek25 Cinewhoop with GoPro8 -
iFlight Protek25 Cinewhoop mit GoPro8 (5 min 51 sec)
...Continue Reading
Posted by kopterheld | Mar 10, 2021 @ 08:00 PM | 16,673 Views

Happymodel Moblite7 19.5g Runcam Nano3
74,10€ - 0,85€ off - https://s.click.aliexpress.com/e/_A2bSws
Mobilte7 is 1g heavier than Mobilte6, but significantly faster with the same 19000KV UniBell motors, F4 AIO board with 25-200mW
66,94€ - $80.99 Coupon BGaFf10oFf - https://www.banggood.com/custlink/KvDYHN1uyQ - 20200913

2021-03-09 Moblite7 4 of 9min LOS Flight Time -
Moblite7 - 4 of 9min LOS Flight Time (3 min 48 sec)

2021-03-10 Happymodel Moblite7 - 19 Gramm 75mm Freestyle Whoop -
Happymodel Moblite7 - 19 Gramm 75mm Freestyle Whoop (6 min 6 sec)
...Continue Reading
Posted by kopterheld | Mar 10, 2021 @ 07:57 PM | 16,924 Views

Jumper T-Lite Hall Sensor Transmitter
57,37€ - $68.39 JP4IN1 Coupon BGTL10 - https://www.banggood.com/custlink/mmDyFnCS8Q
The new Jumper T-Lite remote control with full size Hall sensor, OpenTX FrSky or 4in1 module, 18650 battery required. USB-C charging. Slot for Crossfire Nano TX module available. Crossfire with 1W works if you build in an IRL540N N-MOSFET with 10K resistance.
49,20€ - $59.39 with CC2500 Coupon BGjumpeR00 - 20210222
0,89€ - IRL540N N-MOSFET - Amazon - https://amzn.to/2ZE1pBD

Jumper T-Lite - Perfect FPV remote control -
Jumper T-Lite - Perfekte FPV Fernsteuerung (8 min 21 sec)

Jumper T-Lite FrSky D8 BIND -
Jumper T Lite Modell einrichten und binden mit Meteor65 FrSky D8 (7 min 51 sec)
...Continue Reading
Posted by kopterheld | Mar 10, 2021 @ 07:51 PM | 16,653 Views

Insta360 GO 2 FPV camera
226,47€ - $269.99 Coupon BGCupoNation10 - https://www.banggood.com/custlink/D3KyIuviiZ
The new and best stabilized 2K camera with only 27g now delivers a better picture than the GO v1, 30min FPV recordings, waterproof, ND filters are possible, protective lens, better workflow, recording in MP4,

-----


DJI FPV Goggles V2
Pre-order, delivery March 29st
469,04€ - $557.99 Coupon BGCupoNation10 - https://www.banggood.com/custlink/3KDYOKMNBp
The new DJI FPV V2 goggles now with higher resolution with 810p (1440 Χ 810) instead of 720p and frame rate 144Hz instead of 120Hz. In addition, the DJI glasses support 2.4GHz digital image transmission. But there is still no 2.4GHz DJI air unit. A 1800 mAh battery loves to be charged via USB-C. Power supply now from 2S to 6S. Mobile app with live image via USB-C. A 24 month guarantee is accepted by DJI Germany from DJI products purchased from Banggood.

-----

...Continue Reading
Posted by kopterheld | Feb 25, 2021 @ 06:15 PM | 13,784 Views
DJI FPV Drone after 2 months of experience
DJI FPV Drone nach 2 Monaten Erfahrung (13 min 42 sec)
(en subtitle)
The DJI FPV drone comes with the DJI Goggles V2 and the mini DJI FPV remote control. An optional motion controller that enables one-handed freestyle flying is also available. The DJI FPV drone is the best change from DJI Mavic to an FPV drone. With the new DJI FPV drone, everyone can immediately fly really good FPV with the DJI goggles. There is the N-Mode for beginners which, similar to the DJI Mavic, slowly moves the drone. The 4 collision sensors ensure that the drone brakes or stops in front of a danger such as a tree or a person. With the S-Mode you fly almost like a real racing drone. When turning, the drone tilts like an FPV racing drone and reaches up to 97kmh. The M-mode, i.e. manual mode, allows a speed of 140kmh and you can do 360 degree loops, which is only intended for FPV professionals. A GPS module is built into the FPV drone which can fly the drone back at any time. Take-off and landing is fully automatic as you know it from DJI Mavic drones. A panic button is attached to the remote control; when you press it, the DJI drone is braked and remains hovering in place. The optional motion controller is ingenious and you should definitely buy it. With the motion controller you can fly the drone as intuitively as you would with a WII controller.
The video transmission to the DJI FPV Google V2 is 810p with 28ms in low-latency mode or 40ms in high-...Continue Reading
Posted by kopterheld | Jan 20, 2021 @ 11:35 AM | 15,025 Views
iFlight Crystal HD is the most beautiful, Lumenier AXII HD has better Stubby antennas and TrueRC X-AIR DJI is the best, but also the largest DJI FPV antenna.

If you want the best reception for long-range quads, you should get two of the X-Air antennas.
Unfortunately, the antennas are very large and not suitable for everyday use. If you want to carry the goggles in your backpack, You would always have to unscrew the antennas. But the reception is great with the two X-Air antennas. The Lumenier HD and iFlight Crystal HD, on the other hand, are super practical. These antennas always stay on the DJI goggles, are noticeably better than the original DJI antennas and the price for the antennas is not too high.

iFlight Crystal HD
Combo - https://www.banggood.com/custlink/G3GY5JUV45
Single - https://www.banggood.com/custlink/K3GYVWU5sa
Banggood Coupon: pArts8
Banggood Coupon: 935d63

Lumenier AXII HD
Combo - https://www.banggood.com/custlink/GmKythRqzj
Single - https://www.banggood.com/custlink/DGmEVyEfr2

TrueRC X-AIR DJI
https://www.banggood.com/custlink/v3KmzRw0g6
FPV24 DE Coupon: FPV5 - http://bit.ly/FPV24XAirHD

iFlight Crystal vs Axii HD vs TrueRC X-Air - DJI FPV Antennen - Welche ist die beste ? (3 min 9 sec)



...Continue Reading
Posted by kopterheld | Jan 11, 2021 @ 06:44 PM | 13,774 Views

Version 2 of the DJI FPV goggles can now be ordered.

The most important changes to the DJI FPV Goggles V2 are:
  • * higher resolution with 810p (1440 Χ 810) instead of 720p
  • * Screen frame rate 144Hz instead of 120Hz
  • * in addition to 5GHz a 2.4GHz digital image transmission
  • A 1800 mAh battery USB-C charging
  • USB-C output with live image transmission (mobile app)
  • Power can be supplied with a 2S to 6S battery
* only when using a DJI FPV Drone

Where can I order the DJI FPV Goggles V2?
At Banggood you can order the goggles and they are expected to be delivered on January 25, 2021. The price is still quite high. Right now you only get $ 30 off. Temporarily not available for delivery in Europe, the United States and Canada. The European region is expected to return to normal after March, and the US and Canadian regions will return to normal at the end of Januar.

DJI FPV Goggles V2
460,45€ - $557.99 Coupon BGCuponation10 - https://www.banggood.com/custlink/DDmRIkhAdY

Is it worth switching from DJI FPV Goggles V1 to V2?

The differences are not that big, so switching from DJI FPV goggles V1 to V2 is hardly worthwhile. I would wait until the goggles get cheaper. The higher resolution of 810p, the 2.4GHz transmission and the faster screen rate are primarily intended for the new DJI FPV drone. The existing air units like DJI Air Unit, Caddx Vista continue to work with 720p and 120Hz. Perhaps there will also be an air unit in which everything is built in, such as the...Continue Reading
Posted by kopterheld | Nov 24, 2020 @ 03:18 PM | 17,246 Views
iFlight Nazgul5 V2 with XING-E 2207 1800KV 6S motors with SucceX-E F4, 45A ESC’s and improved frame, Caddx Ratel camera with 25-800mW very good video transmitter VTX.

iFlight Nazgul5 V2 6S 5 Inch

Banggood – https://www.banggood.com/custlink/DGKyJaPMya

iFlight Nazgul5 V2 4S 5 Inch
Banggood – https://www.banggood.com/custlink/G3KEJjHzYB

Coupon: BGNYNGV2

My video - iFlight Nazgul5 V2 the perfect 5 inch quad
iFlight Nazgul5 V2 der perfekter 5 Zoll Quad (5 min 32 sec)


https://kopterheld.files.wordpress.c...zgul-v2-03.png
Above the GoPro8 camera, below the good Caddx Ratel camera

https://kopterheld.files.wordpress.c...zgul-v2-07.png
6S F4 FC with 45A Blheli_S ESC’s

https://kopterheld.files.wordpress.c...zgul-v2-10.png
The thick 6S GNB battery with 1350mAh lasts about 4min flight time

https://kopterheld.files.wordpress.c...zgul-v2-09.png
Here the 6S 2207 1800KV motors well protected with the yellow TPU

https://kopterheld.files.wordpress.c...zgul-v2-08.png
This time the iFlight propellers are yellow and good

https://kopterheld.files.wordpress.c...zgul-v2-06.png
Rear iFlight RHCP antenna

https://kopterheld.files.wordpress.c...zgul-v2-02.png
GoPro Mount here with an inclination of 30 degrees, the new iFlight GoPro Mounts are fastened with a screw and can be adjusted in angle.

https://kopterheld.files.wordpress.c...zgul-v2-01.png
Nazgul5 V2 weighs 399 grams and with the GNB battery it is 603 grams. With the GoPro 8 camera it is...Continue Reading
Posted by kopterheld | Oct 24, 2020 @ 06:27 PM | 16,556 Views
Here how to update - install the DFU Bootloader from iRangeX iRX4 lite and install the latest multi protocol module firmware on the irx4 v 1.3.1.69

Video with EN subtitle
TBS Tango 2 mit Multi Protokoll Modul und Mobula6 binden (7 min 36 sec)

After updating the irx4 you can see the RSSI on the display in the radio by using D8 protocol.
With the v 1.3.1.69 FW you can directly update later the iRx4 with the TBS Tango 2 radio


IRangeX IRX4 LITE:
Coupon: BGIRX4LOT - https://www.banggood.com/custlink/mmKvezgA2B

Mobula6 - Coupon: BGhONEY10 - https://www.banggood.com/custlink/KvmGg2tm9g
Mobula6 HD - https://www.banggood.com/custlink/vGKG27V9Jf


My Kopterheld Coupons on Blog, Telegram or FB:
https://kopterheld.tv/
https://t.me/KopterHeld
FB - http://bit.ly/KhFaceBo

My Equipment:
DJI Digital FPV System - https://www.banggood.com/custlink/mGvK0KF1Em
Fatshark Dominator HDO2 - https://www.banggood.com/custlink/KmGKeeY4pN
ImmersionRC RapidFIRE - https://www.banggood.com/custlink/vm3v6vafP1
Taranis X9D Plus SE 2019 - https://www.banggood.com/custlink/v3mKeGLLp6
Jumper 4IN1 Multimodule - https://www.banggood.com/custlink/vGvGNp7s07
FrSky R-XSR - https://www.banggood.com/custlink/DGvDgKOu8B
CADDX Ratel - https://www.banggood.com/custlink/KKKm6mLf9Q

Youtube – https://www.youtube.com/kopterheld
FB - http://bit.ly/KhFaceBo
Blog – https://kopterheld.tv/
RCGroups – https://goo.gl/JYP87D
Telegram - https://t.me/KopterHeld
Instagram - https://instagram.com/kopterheld
Twitter - https://twitter.com/kopterheld
Posted by kopterheld | Oct 24, 2020 @ 06:14 PM | 15,828 Views
Here my video how you install the module bay on the tango 2 Pro and use the Multi protocol Module iRX4

The Video have en subtitles.
TBS Tango 2 mit Multi Protokoll Modul und Mobula6 binden (7 min 36 sec)


My steps:
- Update the Tango II firmware
- Update the Crossfire firmware
- Upload new data to the SD card
- Install the module bay
- Create a model for the Mobula6 on the Tango
- Pair the whoop with Tango 2 and fly.

IRangeX IRX4 LITE:
Coupon: BGIRX4LOT - https://www.banggood.com/custlink/mmKvezgA2B

Mobula6 - Coupon: BGhONEY10 - https://www.banggood.com/custlink/KvmGg2tm9g
Mobula6 HD - https://www.banggood.com/custlink/vGKG27V9Jf


My Kopterheld Coupons on Blog, Telegram or FB:
https://kopterheld.tv/
https://t.me/KopterHeld
FB - http://bit.ly/KhFaceBo

My Equipment:
DJI Digital FPV System - https://www.banggood.com/custlink/mGvK0KF1Em
Fatshark Dominator HDO2 - https://www.banggood.com/custlink/KmGKeeY4pN
ImmersionRC RapidFIRE - https://www.banggood.com/custlink/vm3v6vafP1
Taranis X9D Plus SE 2019 - https://www.banggood.com/custlink/v3mKeGLLp6
Jumper 4IN1 Multimodule - https://www.banggood.com/custlink/vGvGNp7s07
FrSky R-XSR - https://www.banggood.com/custlink/DGvDgKOu8B
CADDX Ratel - https://www.banggood.com/custlink/KKKm6mLf9Q

Youtube – https://www.youtube.com/kopterheld
FB - http://bit.ly/KhFaceBo
Blog – https://kopterheld.tv/
RCGroups – https://goo.gl/JYP87D
Telegram - https://t.me/KopterHeld
Instagram - https://instagram.com/kopterheld
Twitter - https://twitter.com/kopterheld
Posted by kopterheld | Jul 30, 2020 @ 12:53 PM | 17,116 Views

The first 6S BetaFPV 5 inch super light quad. With a 550mAh 6S battery under 250 grams, 144 grams without battery, F4 FC, 35A BL_32 ESC's, Caddx Ratel super FPV camera, 1805 1550KV motors, 25-350mW VTX
Get 5% Coupon for BetaFPV - http://bit.ly/KHBetaFPV
Use the GiftCARD for 5% more with Coupon: GiftCARD - http://bit.ly/BetaFPVgc
- https://betafpv.com/products/x-knigh...863.nSdqBoHFj7


Video - BetaFPV X-Knight 5 inch 6S less 250g (EN subtitle) -
BetaFPV X Knight 5 Zoll 6S unter 250 Gramm (7 min 2 sec)


Supplied with 2 sets of propellers 5125 Gemfan

...Continue Reading
Posted by kopterheld | Jul 19, 2020 @ 05:03 PM | 18,767 Views

Happymodel Mobula6 HD Runcam Split with good FPV and HD footage.
FrSky D8 CoupoN: BGTT10 - https://www.banggood.com/custlink/vGKG27V9Jf
Mobula6 HD with an HD camera with only 27 grams. 1S Whoop with DVR recording 0802 19000KV motors F4 FC.
Even better, it flies longer on a 75mm frame with Gemfan 1635 props.

Video - Happymodel Mobula6 HD 26g with HD recording - EN subtitles
Happymodel Mobula6 HD 26g mit HD Aufnahme (3 min 43 sec)


Best alternative as FPV version:
Happymodel Mobula6 TinyWhoop 1S
Coupon: BGtt10 - https://www.banggood.com/custlink/KvmGg2tm9g
The best 65mm TinyWhoop!
A TinyWhoop with 20g 19000KV motors, Runcam Nano 3 camera, 25mW VTX, 1S LiPo, F4 FC FrSky or Flysky. With 19000KV, the approx 4.5min flies well through the apartment. With 25000KV the Mobula6 is extremely fast, but the 300mAh battery doesn't even manage 2.5 minutes. My favorite with 19000KV. And the Runcam nano 3 is sooooo good!

Scope of delivery with 4 batteries, 1 USB charger, spare propeller.


...Continue Reading
Posted by kopterheld | Jun 15, 2020 @ 05:58 AM | 17,236 Views

Mr.Croc-HD is a Freestyle QUad, has the DJI Air Unit with F7 FC and 50A ESC’s. Powerful motors 2306.5 1750KV. The DJI camera sits at the front so that the propellers are not in the picture. Bluetooth and GPS module are built in. Weight with CrossFire Nano without battery 428g. Recommended battery - Tattu R-Line 1300mAh 6S 120C or 1050mAh

Get the bundle with DJI goggles with coupon: BGTT10 at Banggood
Banggood - https://www.banggood.com/custlink/GmvGAJcJVZ

Video - FLYWOO Mr Croc HD DJI Digital 5 inch Freestle Quad - EN subtitles
FLYWOO Mr Croc HD DJI Digital 5 Zoll Freestle Quad (6 min 49 sec)


Mr.Croc-HD with 1050mah 6S Lipo

...Continue Reading
Posted by kopterheld | Jun 07, 2020 @ 03:38 PM | 18,203 Views
Lightest FPV Freestyle Quad with 2S battery, Runcam Nano 2 25-200mW video transmitter. Flies even better than the old Tinyhawk 1 Freestyle. The FrSky D8 receiver is permanently installed and can be flown with almost any transmitter such as jumpers, Radiomaster, Taranis.
Get the TinyHawk II Freestyle at Banggood
Banggood - https://www.banggood.com/custlink/3GmD1dNAdB
Coupon: BGTT10
or new User Coupon: BGNEWTHSTYLE

Video - EMAX TinyHawk II Freestyle - EN subtitles
EMAX TinyHawk II Freestyle - bester FPV Einstieg (6 min 9 sec)



Scope of delivery


Propeller arrangement

...Continue Reading
Posted by kopterheld | May 24, 2020 @ 06:02 PM | 19,243 Views
A 5 inch toothpick Quad ET5 with Caddx Vista module, weighs 160 grams and with 650mAh 4S Lipo 237g. The quad is quiet, fast enough, agile and the lightest 5 inch quad you can fly with DJI goggles. Everything built from BetaFPV components.

Video 1 - BetaFPV ET5 DJI Vista 5 inch 237g first flight (EN - subtitles)
BetaFPV ET5 DJI Vista 5 inch 237g (4 min 42 sec)



159 grams with Caddx Vista module and CrossFire Nano receiver


Or with the 3S 850mAh Tattu R-Line battery you can fly over 6 minutes.

...Continue Reading