edge5foamy's blog View Details
Posted by edge5foamy | May 04, 2011 @ 11:38 AM | 11,083 Views
OK, I wanted to do a little blog about SEFF, and post all of my pictures and videos in it. Just now(2 weeks later) got the time to do so...

This was my 5th year going to SEFF, and it was by far the best SEFF yet! It seemed like there were less people then last year, but I really liked having it in the spring. It was much cooler, and the bugs were not out "out in force" yet.

Ross and I arrived about 8:30PM Tuesday night with the P-Stream in tow(remind me to do a blog about the P-Stream sometime). We ran into town, grabbed supper and a few last minute "SEFF necessities", and got back to Hodges. We didn't leave the field again until heading home Sunday. Wednesday and Thursday the weather was amazing! Very little wind. However, Friday and Saturday were not. The wind was crazy! We had a threat of rain on Friday night, but the storms ended up going just north of us. I think it sprinkled for about 5min and that was it. I live an hour north of Hodges and they were under a tornado warning!

What I believe will be a new SEFF tradition was created Saturday night. SEFF Night Bowling! I don't really remember who started it, but some of the guys decided to stack some of the orage plastic cones on a table, and simply see who could knock the most cones down with their airplane. This turned out to be huge. At one point there were around 150 spectators watching. My camera was dead, but there were several other taking pictures and video. You can see the SEFF Night...Continue Reading
Posted by edge5foamy | Apr 18, 2011 @ 12:12 PM | 11,785 Views
WOW! It has been over 2 years sine my last blog entry. I guess that's the spot in my life timeline where I left RC. Well I never really left RC, but I have had so many other things going on I would only fly once every couple of months. It has not been all bad though, I have learned, and gained a lot in the time I spent away from RC. I set a goal to run a 5K race in under 25min, and 4 months later ran my first 5K race in 21:13! I am excited to be starting a new chapter in my life though. I FINALLY decided I want to make a career out of videography and photography. It's something I have always enjoyed doing and lately as I have started putting more time into it, my passion for it has grown. I have slowly been building up my camera gear, and know-how for the past year or so and finally decided I have everything I need to get me started and it's time to make the jump. So about a month ago I switched from working full time to working 24 hours a week in an effort to start "Duct Tape Productions". It's nothing official, copyrighted, or licensed yet, just a dream that will hopefully start to fade into reality over the next few years. Which will hopefully also lead to flying more. RC is not however the focus for DT Productions, my aim is more towards commercials, music videos, etc.

I just got back from SEFF yesterday(which I will post about in another a later blog), and it really reminded me how much fun it is not just to fly, but to be around the rest of the guys in the RC community.

Well that's it in a nutshell. I'm sure there will be plenty more to come as this all pans out.

Until next time...
Posted by edge5foamy | Mar 26, 2009 @ 11:53 PM | 13,544 Views
WOW! Has it really been a month since PERRY?? Time is flying by!

Anyway, Perry was awsome! Did not buy much, but I was trying to save as much as possible so I could put it towards the trailer.

I finally have my first ever demo flight over with! Here is the video...

Yak54 Demo at SE Model Show (Perry Swap Meet) (2 min 11 sec)

I did however pick up an SSX! While at the 2DogRC booth I noticed a SSX box leaning up against the wall that said "Shipping Damage - $35 OBO". The guy showed me where there were a few crushed spots in the wing. I offered $25, and he took it. I cut the covering away around the crushed spots, repaired the balsa the best I could, and just got the new covering in today, so I got the covering patched where I had cut it away. Hoping for a maiden this weekend. Will post more on that later.

As for other builds I am working on, I dont have too much left on the Gambler DLG kit. Just waiting on the ESC to get here for the UFX, and I have some combat planes on the way.

Will post more about all that once I get them flying.

As for the trailer I have now completely replaced the ply around the outside of the trailer. Now if I could just get a weekend without rain so I could get the sheet metal on it

SEFF 09 promises to be the best SEFF ever for me. The longest I have ever been able to be at SEFF is for 2 days. This Year I am going to get there the Saturday before! I will also have my own trailer to stay in!

OK, it is almost 1AM so I need to get in bed. Thats it for this months update, but I will try to post more as I get done with all these projects I am working on.

Posted by edge5foamy | Jan 04, 2009 @ 02:52 AM | 14,096 Views
I figured I would do another update since I have not posted a blog in a couple months.

My current fleet consists of...

Charger RC CR-260
Charger RC Flat Stick
Model Aero StarCat
Scratch built 3D foamy(designed by Chris Scoggins)
Tumble Buddy
Combat Plane
PA Katana(needs a little repair work)
QQ 69'' Yak(needs batteries)
6ft Telemaster Electro(needs some repair work)
Blade CP

Still in the box...
E-flite Ultimate FX

On the way to me right now...
Fancy Foam Yak 55
Parts for a foamy I will be scratch building

On the to buy list...
PA Ultimate
PA Addiction
A couple foamies
A glider
And hopefully sometime later this year... A wild Hare Edge 540 50cc!

Thats right I hope to get my first gas plane this year.
Posted by edge5foamy | Oct 19, 2008 @ 01:16 PM | 15,466 Views
Here are a few pics of the 3 foamies I have airbrushed so far.

The blue flames plane is a Charger RC CR-1
The rivets/American flag plane is the Charger RC CR-260
The silver/blue plane is the Charger RC FlatStick
Posted by edge5foamy | Sep 20, 2008 @ 10:51 PM | 14,801 Views
Well with the Hodges Hobbies All Electric Fly-In V3 less than a week away now, I am rushing to get planes ready!

Weather is looking superb for next weekend! I have had Friday the 26th marked on the calender at work for me to be off for 2 months now! I have been REALLY looking forward to this event! I have not even been to any flying field since SEFF(May 1st-4th).

I will be sure to take as many pics/videos as possible!

I will be taking...

6ft Telemaster(NIGHT FLYING!!!)
PA Katana MD
Charger RC CR-1
Charger RC CR-260
Charger RC FlatStick

I will also be picking up my combat plane I bought from Richard(HodgeHound) while I am down there. Now whether or not it comes back with me, or atleast comes back in one piece is a different story.

I am also probably going to pick up a PZ Corsair if they have any in-stock at Hodges.

One of my parents will take me down there Friday morning, and pick me up Sunday afternoon. I will finally be able to go to a fly-in by my self!

The next fly-in I will be going to will be the Hodges Hobbies Fall Fly-In/Dan Stevens Memorial Fly-In

OK, back to getting planes ready....
Posted by edge5foamy | Aug 23, 2008 @ 08:17 PM | 16,433 Views
OK, I got my first airbrush kit last week!

Just airbrushed the CR-1! Its not much, but I think it looks cool.

Still needs a little touching up though!
Posted by edge5foamy | Jul 21, 2008 @ 03:30 PM | 15,488 Views
Here is my most recent video of the Precision Aerobatics Extra 260!

Precision Aerobatics Extra 260 - Edge5foamy (3 min 20 sec)

Posted by edge5foamy | May 20, 2008 @ 10:47 PM | 16,033 Views
Well, I just thought I would post a quick update!

The SuperFly is A LOT of fun! I tested the durability last weekend I had it on its side in a turn at full speed(which is pretty fast on 3s!) about 20ft off the ground, and I just lost control. I am not sure exactly how it happened, but I had the antenna taped down, and I think the the tape came off, and allowed the antenna to dangle into the prop, and get pulled out of the Rx! It went in on its side at full throttle, did more cartwheels then I can count, and the only the that happened was it broke part of the canopy, and all it took was about 30sec with the hot glue gun, and it was in the air again!

I maidened my scratch built foamy biplane today! It flys very well! Only problem I have found so far is that it will only fly KE if I dont hold much rudder in it, if I do it rolls out. I think this is because of how ,much side area it has from the struts, I will trim the down some, and see if that helps.

I have been wanting the Oxalys F3A from Hobby-Lobby for a while, and just got an e-mail saying it will be in the Crash Sale tomorrow, and will be discontinued after that, so I will probably be ordering one.

I also plan on setting up my Hobby-Lobby FA-18 with vectored thrust this weekend!

Sometime soon I hope to get a Lynx, take the fan off, and put a MicroDan 2505 "SPEED" in it!

There are a few planes I hope to get when they come out...

E-flite Ultimate(if its anything like the Ultimate Fx it will be awsome!)
QQ Turbine Toucan
SebArt Angel 30e
HL F5-E Tiger Swiss
Multiplex Blizzard
Posted by edge5foamy | May 15, 2008 @ 10:24 PM | 16,418 Views
OK, here is the newest addition to the fleet!

It is a SuperFlyRC SuperFly!
Posted by edge5foamy | Mar 11, 2008 @ 01:03 AM | 20,332 Views
My Extra 260 came in today!

I am doing a build log on it, which you can find at www.rcgroups.com/forums/showthread.php?t=831829


Posted by edge5foamy | Mar 01, 2008 @ 02:11 AM | 17,703 Views
Posted by edge5foamy | Feb 22, 2008 @ 08:59 PM | 17,982 Views
Here is the build log/review of the Charger RC Axilon P-3D Pro!
Posted by edge5foamy | Feb 21, 2008 @ 11:21 PM | 17,817 Views
OK last Thursday I went out to fly my MSComposit Pitts S2, and had my little brother video.

The next day I posted it on YouTube, and TeamFlyingCirkus.com

A few hours later I get a message from Showtime(owner of TFC) reading...

"Dear Edge:
I would like to offer you a great opportunity here at TFC. On behalf of Charger RC and Team Flying Cirkus we would like to sponsor you as one of our pilots!

Thanks =Jason (Showtime)"

So now I have two Charger RC kits on the way to my house. I will for sure post some videos of them once they get here. Might even do a build log!

So, go check out www.ChargerRC.com!
Posted by edge5foamy | Feb 16, 2008 @ 10:05 PM | 16,588 Views
Well, me and Bryan D went up to Hodges today. PERFECT flying weather!
Very little wind early after noon, ZERO wind from about 4:00 to dark. I got about 20 flights in. I took the Telemaster, F/A-18, and Pitts S2. I took the SlowStick incase we stayed late enough to night fly, but we didnt. I did di about 8 air drops with the Telemaster. Parachute men came out perfect every time!

I got to see Bill Fly his BVM Electra Jet! Only the nose, and right retracts would come down, so he had to retract em, and belly land it.

Joey was doing an auto with the T-Rex 600, when the Rx pack came unplugged, it fell strait to the ground from about 50ft! Did I ever mention I HATE JST connectors!?!?! It did a number on it too.

Ryan Evans brought out the BIG Cessna! He kept having trouble with the left engine. 3 times he took it up, and the left engine failed! The dude is one heck of a pilot. Landed it perfect all 3 times. It is Hard to land a twin engine plane when only one motor is running! He finally got it going, and was up flying for about 3-4min when the servo arm came off the right aileron servo. Aileron, and wing started fluttering like crazy! He landed it perfect too!

All in all it was a great day! first time I ever went to a hobby shop, and only spent $4!

Bryan bought a World Models UniJet! Stocked up on Foam safe CA too!

I did get some aerial video from the Telemaster! I will post it as soon as I am done editing.
Posted by edge5foamy | Feb 15, 2008 @ 10:24 AM | 17,259 Views
Short video of me flying the Pitts S2...

Flying the MSComposit Pitts S2 BullDog! (2 min 34 sec)


Axi 2212/20
Jeti Advanced 18A
Vampowerpro 3s 1300mah
4x HS-55
Berg 7P
Posted by edge5foamy | Feb 03, 2008 @ 10:46 PM | 19,011 Views
My Aunt got a recipe book, and it has a spoof recipe for fruit cake!

Click on the pic below, and read it! It is freaking funny!
Posted by edge5foamy | Jan 28, 2008 @ 11:55 PM | 13,158 Views
Hey guys, I spent most of yesterday, scratch building this foamy! I dont have a name for it yet though.

BTW, those LEDs are the ones I got from Advanced Auto!
Posted by edge5foamy | Jan 24, 2008 @ 12:29 PM | 12,703 Views
Hey, my review of the YardBird RC YB-22 was just posted here.
Posted by edge5foamy | Jan 23, 2008 @ 11:31 AM | 11,426 Views
Well, my SlowStick has been beat to death, so I ordered the barebones kit from Radical RC. I was going to get it from Tower, but then I noticed that Radical RC will ship for $3!

I also just ordered the 30A Power Supply from Hobby-Lobby during their Crash Sale today. Just $65 for a 30A power supply! Along with the power supply, I order a new prop for my Slow Stick, and some carbon rods for a "secret" foamy project I am working on(will post more on it as I get further along with it)

The I order the servos for my QQ Yak, and my MScomposit Pitts.

Also finally got around to renewing my AMA membership. I feel accomplished!