_helitron_'s blog View Details
Posted by _helitron_ | Sep 15, 2010 @ 07:43 AM | 11,770 Views
Since years I've been mounting protect rings on my quadro and hexacopters. Here some detailed pics of the simple and inexpensive construction of my protect ring mounts.
Posted by _helitron_ | Sep 06, 2010 @ 05:37 PM | 10,716 Views
Got today new power plants for my T-Rex 450SE (with EC-135 fuselage and scale fenestron shortly) and T-Rex 600CF (both helis flybarless).
Posted by _helitron_ | Sep 06, 2010 @ 05:29 PM | 12,955 Views
Built a new more robust landing gear for my AP/AV Hexacopter. Due to the movable leg holders a wide range of landing gear width is adjustable.
Posted by _helitron_ | Sep 06, 2010 @ 05:12 PM | 11,188 Views
Got the chance to do the first flight with my 500 W Funjet and the FY-21AP autopilot and have tested the modes stabilizer, stabilizer with altitude hold, 120 meter circling and RTH (Return To Home) successfully. Sorry, no on board video or ground video unfortunately.
Posted by _helitron_ | Aug 25, 2010 @ 02:11 PM | 11,398 Views
Funjet will be the first testbed for my new FY-21AP RTH autopilot, first testflights will take place not before weekend unfortunately.
Posted by _helitron_ | Aug 20, 2010 @ 01:45 AM | 12,076 Views
After balancing six new APC 10 x 4.7 Slowfly props I've retired the EPP 1045 props. The APCs are much more sturdy as the EPPs specially important when the TOW of the multikopter is a bit higher.
Posted by _helitron_ | Aug 13, 2010 @ 01:39 PM | 11,520 Views
Not a lot of progress with FPV plane Skywalker today but glued the wings together at least .
Posted by _helitron_ | Aug 13, 2010 @ 11:39 AM | 10,921 Views
Today I managed the inspection of a damaged flue with the Hexacopter.
Posted by _helitron_ | Aug 10, 2010 @ 02:33 PM | 11,603 Views
Just started to build a new FPV plane beside of my good ol' MPX Easystar. It's a Skywalker from


a plane specially designed for FPV with a huge payload room. Below the parts for the power plant, a TLRS UHF Long Range Receiver ( http://www.webx.dk/rc/uhf-link3/uhf-link3.htm ) and the servos. For automatic RTL (Return To Launch) I'll install an autopilot from Feyutech www.feiyudz.cn (see pic below).
Posted by _helitron_ | Aug 10, 2010 @ 02:07 PM | 11,007 Views
Got a new fire and water resistant case for the LiPo batts (weight 8.5 kg without batts )
Posted by _helitron_ | Aug 10, 2010 @ 11:09 AM | 12,654 Views
Just converted also my T-Rex 600CF to FBL (flybarless) with the Align FBL conversion kit, consisting of the FBL head with swash plate and a 3G FBL-stabilizer. First testflights was a success at all. R/C link is Thomas Scherrer's UHF Long Range System TLRS ( http://www.webx.dk/rc/uhf-link3/uhf-link3.htm ).
Posted by _helitron_ | Aug 10, 2010 @ 09:20 AM | 13,702 Views
Converted my T-Rex 450SE to four blades with a CopterX 4-blade rotorhead, a set of Spinblades (www.spinblades.com) and an Align 3G flybarless stabilizer. Testflights was very successful, so I started to integrate the little T-Rex in an Align scale fuselage (Eurocopter EC-135). Last missing part at the moment is the scale fenestron (see pic below) so I've to wait a little bit with this project. Btw. T-Rex 450SE is also equipped with Thomas Scherrer's awesome UHF Long Range System TLRS ( http://www.webx.dk/rc/uhf-link3/uhf-link3.htm ).
Posted by _helitron_ | Aug 10, 2010 @ 07:04 AM | 11,828 Views
Ground station for FPV, AP and AV and additionally to control the Hexacopter via telemetry (transfer waypoints and so on).
Posted by _helitron_ | Aug 10, 2010 @ 06:06 AM | 11,090 Views
Took the first aerial testpic with the Hexacopter, not really sharp but for the first try it's ok
Posted by _helitron_ | Aug 10, 2010 @ 06:00 AM | 11,174 Views
Managed a successfully maiden of my new MPX Funjet (the 3. Funjet already ), this time finally with Thomas Scherrer's awesome UHF Longrange R/C system TLRS ( http://www.webx.dk/rc/uhf-link3/uhf-link3.htm ). Lost before two Funjets already due to interference on the 35 Mhz R/C band. As on each flight with each of my models the awesome Junsi CellLog 8S LiPo logger was also on board.
Posted by _helitron_ | Aug 09, 2010 @ 11:42 AM | 11,722 Views
Just got new batts for the Hexacopter, two 2S 6000 mAh nano-tech LiPos from HK, up to unbelievable 30 A charge current (5C) and 300 A discharge current (50C) ! Will connect both then to a very flat 4S 6000 batt.
Posted by _helitron_ | Jun 08, 2010 @ 09:18 AM | 12,543 Views
Just built a new Hexacopter as a cam carrier for my Samsung HDC-SD10 FullHD camcorder: