TinkleWid's blog View Details
Archive for December, 2018
Posted by TinkleWid | Dec 28, 2018 @ 11:09 AM | 4,461 Views
TopSky Prime 1S FPV Goggles [Working] 😮 Caddx Turtle V2 Water Damage Tip 😅 [4:3 Progression]

0:00 Crash Turtle V2 Crash and Camera Water Damage while attempting to fly in 4:3 with the TopSky Prime 1S
00:46 Flying in 4:3 with the TopSky Prime 1S and Caddx S1 Camera (waiting for the Turtle to dry)
02:14 Caddx Turtle V2 Water Damage fixed
02:20 Testing the Caddx Turtle v2 with TopSky Prime in 4:3
03:10 Smooth flying with the TopSky Prime in 4:3
04:39 Super smooth flying

TopSky Prime 1S FPV Goggles [Working] 😮 Caddx Turtle V2 Water Damage Tip 😅 [4:3 Progression] (6 min 40 sec)

I had a scare when my Caddx Turtle V2 stopped working after a slight crash into some wet grass. It froze on the splash screen but after drying for an hour it worked again. Unfortunately, it has happened since but worked again when drying out. I hope this doesn't shorten the life of my camera 😮

After a terrible start I am finally getting some use out of my TopSky Prime! They are not perfect but for me they are a slight upgrade (only in the sun) from my Eachine VRD2 Pro Box Goggles. Most importantly I love the feel of two screens rather than one and flying in 4:3 rather than 16:9.

For some reason I can see detail much better with the TopSky Prime s1 than the box goggles but they are still definitely beginner fpv goggles (less pixels). I have no problem with focus as I have flipped the lenses (link rcg) but do think I will upgrade to a...Continue Reading
Posted by TinkleWid | Dec 14, 2018 @ 10:40 AM | 6,199 Views
Probably best not to buy at all and wait for Version 2

TopSky Prime v2 @ GearBest (unbelievable, what a joke!)

TopSky Prime 1S FPV Goggles WARNING 🐢 Caddx Turtle V2 🕶️ VTX Issue 🕶️ Box Goggles Comparison (4 min 39 sec)

Initial Review from flying with the TopSky Prime S1 Goggles for a couple of hours after using a set of Eachine Goggles for 10 months.

Overall, a frustrating day but there is hope in sight once TopSky release a production version ! This is not that version !

I have written to TopSky and am awaiting a response!!
Has anyone else had the VTX issue?

TOP TIPS (focus):

Topsky Prime 1s diopter mod : focus issue solved for me
I taped the battery to the outside of the goggles so the diopters would slide the screen all the way back

Lens Flip: If removing the battery is not enough then you can flip the lenses with a flat head screwdriver

Caddx Turtle Firmware Update Video
Runcam KILLER 🐢 UPDATED Caddx Turtle v2 Latest Firmware AMAZING 🐢 RunCam Split Mini 2 FPV is DEAD (3 min 37 sec)
...Continue Reading
Posted by TinkleWid | Dec 08, 2018 @ 11:25 PM | 5,075 Views
A bit of luck is always needed when racing through those first 'GHOST' Branches 👻👻👻👻👻

Caddx Turtle v2 🐢 SLOWMO Settings 🦕 3" HGLRC F440 👻 Lucky Day !! (2 min 15 sec)

Equipment Used:
Flying the Kwad Karl (Bando Racer 3) BR3 Frame
XJB 145 build and motors https://www.banggood.com/HGLRC-Flame...18277502201801
Caddx Turtle v2 with v2 firmware https://www.banggood.com/Caddx-Turtl...18277502201801
XM+ https://www.banggood.com/Frsky-XM-Mi...18277502201801
VRD2 Pro Goggle
Jumper T8SG
Gemfan 3052 https://www.banggood.com/2-Pairs-Gem...18277502201801

🐢 🐢 🐢 December 2018 Edit 🐢 🐢 🐢
I have been sent a COUPON CODE for the following products: (508fd3 @ 10% off)

Caddx MB05 Main Board PCB Mini Camera Module for Turtle V2 (508fd3)

Caddx CM07 Camera Protective Case Set OSD Board Bracket AV Cable for Caddx Turtle V2 Black/Red - Red https://www.banggood.com/Caddx-CM07-...stlinkid=72555

Caddx MB05-2 1/2.7 CMOS 800TVL Sensor Board Camera Module 1080P 60fps WDR for Turtle V2

Caddx MB05-1 1080P Mini Recorder Board DVR Camera Module https://www.banggood.com/Caddx-MB05-...stlinkid=72559

RUNCAM COUPON CODES ( 508fd3 @ 10%)

RunCam Split Mini 2 FOV 130 Degree 1080P/60fps HD Recording & WDR
https://www.banggood.com/RunCam-Spli......Continue Reading