This link will take to the my most active thread,
https://www.rcgroups.com/forums/show...70974&page=482
I wanted to resist the multicopter trend but I couldn't, I flew a DJI Phantom and the bug bit me!
I've made a small tri-copter that flies very well, now I'm building a 450 size Quad-Copter.
30th March 2015 EDIT
Things have moved quite a bit over the two years this blog started, now I'm doing FPV, see last pages.
I'm also going to post here plans of my frames, courtesy of my friend John "Potshot"
...Continue Reading
https://www.rcgroups.com/forums/show...70974&page=482
I wanted to resist the multicopter trend but I couldn't, I flew a DJI Phantom and the bug bit me!
I've made a small tri-copter that flies very well, now I'm building a 450 size Quad-Copter.
30th March 2015 EDIT
Things have moved quite a bit over the two years this blog started, now I'm doing FPV, see last pages.
I'm also going to post here plans of my frames, courtesy of my friend John "Potshot"
...Continue Reading
Comments (7,725)
Add Comment
-
Views: 422
Own Design "Parky" version 2, probably my first build using Depron, folded 3mm on wing and 6mm used on fuselage. -
Views: 355
Own Design Parky ver#1 Lift was not good on that first wing. -
Views: 374
Segu, very fast OD flying wing. video here, http://www.youtube.com/watch?v=_CgzoL4NdB4 -
Views: 402
One of our first OD autogyros experiments, RIP. -
Views: 445
Tera, OD delta, this was the final version, good fun, Made of 6mm depron. Video here, http://www.youtube.com/watch?v=Zjv69CGVydQ -
Views: 669
Tibu OD flying wing, made of folded 3mm Depron, video of build and fying here, http://www.youtube.com/watch?v=_EJOUx4sp6g -
Views: 365
Twirl, excellent first autogiro, plans here on RCG. had so much fun flying it. My son loved it too. Video here, http://www.youtube.com/watch?v=bxO74Wuf2bo -
Views: 437
OD Cierva c30 ish, flew nice..eventually. Thread with photos and videos here, http://www.rcgroups.com/forums/showthread.php?t=1055350
-
Views: 558
My lovely Wayfarer, had so many hours of fun with this scratch built replica of the Svenson Wayfarer, it flew with engines from 40 to 60 odd, what a great plane that was. -
Views: 430
Rebuild job of a EZ pattern model, can't remember the name, nice flier. -
Views: 629
Scratch built sort of Bae Hawk, RIP on maiden, too far forward CG and could not recover from spin dive, shame. Used the surviving wing to do a slope soarer. -
Views: 400
there it is..learned a lot with it on the slopes -
Views: 411
Chuck glider Skeeter, super fun at slopes, thermal..etc I then built others with Speed 400's and folding props, great model. -
Views: 394
My first electric glider, a Great Planes Electra and a Kyosho low winger, some of my first decent electric performers -
Views: 405
OD using the Kyosho wings, very nice flier. -
Views: 362
OD called EMI, used 8cell Nicad 1000's and a FUN400 Kontronik geared motor, plenty of power, lively thing.
-
Views: 453
A sort of Cap 21 built using pieces of a friends write off..kind of recycling you could say..1990's -
Views: 491
Spit mk 14 I think, Started build from plans in 1994..(is now 2010 and still not finished) -
Views: 404
kind of a Norman Islander, OD of mine 1995 or so, 2 geared speed 400's, flew very well, a floater. made of white foam covered with brown paper. -
Views: 386
Great Planes Cub, superb flier on 6-7 cells Nicad -
Views: 404
Chris Foss Middle Phase slope soarer, great performer even with little wind. 1995-6 ish -
Views: 396
Some Kyosho electric trainer I had, it was ok but not brilliat -
Views: 525
That was my Last IC model and engine a TT trainer and a lovely OS 4 stroke. -
Views: 425
One of my first trainers, a Modelhob "Coyote"
