https://www.horizonhobby.com/on/dema...-Manual_EN.pdf
am starting this with the purpose of being able to use this radio for my goals, and thinking that are others in the same situation.
but wait....after much struggling, this is way too complicated for my goals, too many things too complicated and couldnt find explanations, so am closing it out. sorry.
on the other hand... i found this explaining exactly what i need:
"Developed from the pioneering DX6, the DX6i bridges a gap between basic 4-channel rc transmitters and overly-complicated 8+ channel ones. At around the $200 mark, it's an affordable Tx that offers more than enough functions and features for the average club pilot, and especially for the beginner."
Comments (0) Add Comment
there are some things that are not clear to me so am making comments about it.
am getting directly into the System Setup, page 14:
the 1st thing we need to know is how to turn it ON:
1-to enter, press /hold the roller
2-turn the switch ON
3-release the roller.
now you are in. you see the screen illuminated.
it shows the 1st of 2 pages. if you want to search for more functions just keep pressing and the rest will appear.
for this, in system setup, you dont need the receiver to be connected.
next is:
Model Select
(Model Select allows access to the 250 model memories)
1-roll to the desired model memory in the list
2-press roller. you are back to the system setup list.
here the manual talks about
...Continue Reading