Avanti S - March 2, 2024 (2 min 54 sec)

Hello everyone,

The length of days is shortening and temperatures are dropping. It smells like the end of the season on our flying field in Vicques. It is therefore time to highlight my most beautiful captures from this emotional 2023 flight year. I hope that you will like her.

Highlight AMJD 2023 (5 min 20 sec)

Eclipson Model S - RC Motorglider 3D printed. Flight of may 21, 2023 (5 min 18 sec)

My best moments 2022 on the field (5 min 28 sec)

RC Jet flight patrol. Avanti XS SebArt. Flight of october 9th 2022 (7 min 7 sec)

De Havilland Vampire T55 3D printed RC model with EDF. Flight 2022-04-18 (4 min 41 sec)

Tiltrotor RC Aircraft Nemo V5. Flight of april 18th 2022 (5 min 15 sec)

...Continue Reading

Hello,

Indoor 4D flight training with my personal Extra 330 SC... The reflexes are not yet acquired but it's rather encouraging. A few more efforts...
Many thanks to my friend Nico who filmed my flights.

Flight training with my Extra330SC 4D (2 min 47 sec)

New design for my Tiltrotor RC Aircraft Nemo V5 (3 min 45 sec)

Hello everyone,

Next video from September 2021. Helicopters are in the spotlight

1) Alouette II - September 12, 2021 / Pilot : Lionel H. / Cameraman / Steve G.
2) Lama - September 12, 2021 / Pilot : Alain K. / Cameraman / Steve G.
3) Soxos 600 - September 12, 2021 / Pilot : Yann M. / Cameraman / Steve G.
4) LOGO700 - September 12, 2021 / Pilot : Joël F. / Cameraman / Steve G.

Heli RC Alouette II (3 min 35 sec)

Heli RC SA315B Lama 1:3 Scale (4 min 26 sec)

...Continue Reading

2021-09-06 Nemo 4S VTOL Aircraft - Tiltrotor RC model (1 min 32 sec)

Heli RC EC-635 Swiss Air Force (4 min 25 sec)

...Continue Reading

Hello everyone,

Next video from August 2021.

FMS Super Scorpion EDF 90mm - 3# Flight - August 28, 2021 / Pilot : Didier G

FMS Super Scorpion EDF 90mm - 3# Flight - August 28, 2021 (3 min 56 sec)

Hello everyone,

Next videos from August 2021.

1) Flight formation BAE Hawk FMS & L-39 Albatros Freewing / Pilot : Bastien Z. & Steve G.
2) FunRacer Multiplex / Pilot : Bastien Z.
3) Airwolf 800 ROban / Pilot : Philippe L.

Flight training in formation with RC jets. August 18, 2021 (1 min 21 sec)

RC Model Multiplex Funracer. Flight of August 18 2021 (3 min 45 sec)

...Continue Reading

Hello everyone,

Here is a preview of my videos from August 2021.

1) Mikado LOGO 550 / Pilot : Cedric C.
2) De Havilland Vampire T55 / Pilot : Steve G.
3) Lama Vario 1:6 / Pilot : Carryl M.

RC Heli Mikado LOGO 550 Flight of august 12, 2021 (4 min 5 sec)

RC De Havilland Vampire T55, Flight of august 14, 2021 (3 min 44 sec)

...Continue Reading

Hello everyone,

Here is a preview of my videos from July 2021.

2021-07-21 Nemo aircraft - Tiltrotor RC model. (5 min 28 sec)

BAE Hawk EDF 80mm FMS RC model (2 min 58 sec)

...Continue Reading

Good morning all,

Some excerpts from the beautiful flying moments of the year 2020 in the video below. The images were taken in Vicques in Switzerland.

Extrait de la saison de vol AMJD 2020 (3 min 40 sec)

Hello everyone,

After successfully building and then flying my Nemo 4S convertible model, I decided to start studying and building a new model: The XTI Trifan 600.
XTI Aircraft Company, based in Denver Colorado, is developing this revolutionary design aircraft. https://www.xtiaircraft.com/
Based on the images and videos that I could find on the internet, I tried to draw inspiration from the lines of the Trifan 600. I do not claim to obtain the exact shapes. I miss my knowledge in my software as well as the technical documentation. I'm just trying to get as close as I can to it.
After the long hours spent on the CAD software, the first screenshots are here.
There is still a lot of work to do but it is already very motivating. I will now have to start the test bench which will allow me to validate the technological components.

Here are some photos taken the weekend of September 5 and 6 in Vicques as part of the Vic'Funfly meeting.
I took part in it with my Nemo 4S model and the Freewing L-39 ALbatros. I thank my friend PAG for the photos.

Satisfied with the flights of my first VTOL Nemo model, I chose to build a larger model. Here is the 6th flight of my new model with tilting rotor.

Caracteristics :
Wingspan : 1500mm (with motors)
Airfoil : N10 modified 15% relative thickness
Weight : 1300gr
Accu : Lipo 14.8V 4S 2200mAh
ESC : 2x 35A Talon Castle Creation
Motors : 2x Aerodrive Turnigy D2830-11 1000KV
Propeller : slowfly 2x 8x4" (3 blades) (CW and CCW)
Card : KK2.1 with OpenAero VTOL 1.6 firmware

NEMO 4s RC Tiltrotor aircraft (2 min 43 sec)

Thread PAUL's Nemo : https://www.rcgroups.com/forums/show...opter-Test-Bed

Caracteristics :

Wingspan : 800mm (without motors)
Airfoil : N10 modified 15% relative thickness
Weight : 440gr
Accu : Lipo 7.4V 2S 1000mAh
Servos :
2x ailerons Hitec HS-55
2x Tilts Hitec HS-56 HB
1x elevator Hitec HS-55
ESC : 2x 12A Afrojack opto
Motors : 2x Epower 2204 2300KV
Propeller : slowfly 2x 7x6" (CW et CCW)
Card : KK2.1 with OpenAero VTOL 1.5 firmware
Receiver : frsky

Video of my Nemo version

NEMO VTOL (3 min 15 sec)

This is some pictures of my Edge 540 epp model project.

Caracteristic :

Wing span : 880mm
Length : 870mm
Weight : 160gr