Posted by greykat |
Aug 31, 2013 @ 11:09 PM | 5,653 Views
I ran this on nitro until it needed a new motor then installed the Associated conversion kit. Tekin RX8 ESC, Tekin T8 2650kv motor. This system will handle 6S, it is geared for 4S and has all original Tekin paperwork. I use 2X 2s packs or insert the jumper and run 1X 4S pack. It has new tires and a Hitec HS-7965MG steering servo.
Posted by greykat |
Aug 31, 2013 @ 09:32 PM | 5,518 Views
Stock VXL-3S power system, geared for 2S. All 3 diffs are aluminum, aluminum rear uprights, king headz motor mount, RPM bumpers, aluminum 17mm hexes. Buggy body and buggy tires. SCT body and SCT tires. Proline shocks and tuning spring kit. I can include a Turnigy 3 channel radio system if you need it.
Posted by greykat |
Feb 10, 2013 @ 01:35 PM | 3,828 Views
Stretched with SAB 470 FBL blades. Scorpion 3026-880 with CC ICE lite100 esc. CC 10amp bec. Hitec 5245MG cyclics and Futaba BLS251 tail. FBL unit NOT included
Posted by greykat |
Feb 05, 2013 @ 07:02 PM | 3,723 Views
notice it also has the KDE head and the Logo 600SE belt
