Comments (0)
Add Comment
-
Views: 816
PLD-POWERBUS-A4: 4 Isolated 1A supply channels for servos. -
Views: 465
PLD-POWERBUS-MINI: Isolates 6 channels from the receiver power, servo power supplied externally. -
Views: 393
PLD-PGMS8: Programmable strobe system, 4 independent light channels up to 1A per channel, can use RX or external power for the LEDs.
-
Views: 446
PLD-BACALL, boosts 1S lipo to 5V/1A with lost model alarm, low voltage alarm, magnetic on/off and built in charger -
Views: 328
-
Views: 362
Just freshly built 3A 5V linear regulator board with electronic on/off, low volts alarm and plenty of decoupling -
Views: 399
Bottom side of the new 3A 5V regulator, love that heatsink! -
Views: 384
The servo volts/amps/pulse logger, this prototype shows an ugly blue resistor on it but the real version will have a nice flat surface mount one -
Views: 380
The popular SCC1 mAh counter, these tiny LCD screens are great for such projects. -
Views: 340
Christmas is nearly upon us - so get in to the spirit and get a regulator board for your big glider or glow plane that doubles as a set of Christmas lights :D
-
Views: 473
Board assembly, soldering, fixing zone. Parts are kept in the boxes in the shelves, bulk lots are in boxes under the bench -
Views: 466
Closer look at the bench - grey device on the left is a hot-air rework station, obscured black box is the soldering station (GOOT RX711), all the tetris-like containers have the surface-mount parts in them. Hanging on the wall is my vacuum-pen -
Views: 452
On the other side of the room, the programming bench and paste-stencil cutter as well as some rudimentary testing gear. -
Views: 452
The better dev bench, power supplies, good multimeter,more programming facilities for the microcontrollers. Showing my Low-ohms-meter and the SCC-Odometer on the bench -
Views: 439
The "Design" (lazy) bench, this is where I do most of my work, dual screens are utterly invaluable for design. Most notable thing missing here is my beloved IBM-M Keyboard, which sadly I've not yet been able to repair.