Posted by Bill M - RC | Today @ 02:14 PM | 89 Views
Hi fellow rc pilots & rc enthusiasts

Mini TS100 Soldering Iron review, This MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron review includes unboxing, features and workbench demonstration.

You can this MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron here:

Mini TS100 Soldering Iron review - Great for RC Repairs & Builds (8 min 45 sec)

Posted by unboxingexp | Today @ 11:03 AM | 175 Views
Z51 Predator RC Airplane (3 min 17 sec)

Get it here

EPP material, lightweight and durable. Folding wing design, with durable landing gear. DIY assembly, powerful 450mAh lipo can provide 20 minutes long flight. With two motors, and through motors speed difference to achieve steering. Built-in gyroscope and powerful power allows the model to easily take off from the ground. 2.4G 2CH remote control included. Efficient aerodynamic contour design ensures good flight performance and stability for better glide performance.
Posted by Screamin' Eagle | Today @ 11:00 AM | 177 Views
Next month is my 15th Anniversary on RCG and my 15th Anniversary of being back in R/C after 15 years off. While my available time to slope and DS has ebbed and flowed, I'm now self-employed and let's just say the boss is a DS addict too! I've recently pared down the hangar but still have a pretty healthy stable of slope and DS ships, a 3m Ellipse 3cam, a few foamies, and a yet-to-be maidened Explorer 2.5 for flat field thermal use. I also have a single electric plane, an HK EFX Racer.
Posted by Tazkiller85 | Today @ 05:03 AM | 356 Views
Yep Les Amis,
Detected or not detected ? En route pour un 3eme vol avec le FIMI X8 SE ... Aujourd'hui je test sa vitesse de pointe en mode normal et en mode sport, plus deux autres modes de vol, orbit et spirale .
Je m'entête également avec le "precision landing" mais vous allez voir qu'en faisant des heures sup, tout arrive !!! lol . C'est aussi ma première vidéo Uploader en 4K, pour l'instant en 30FPS car le montage est plus lourd et difficile mais j'espère que vous serez satisfaits du rendu final. Je précise que je n'ai fais aucune retouches aux images du drone mais on perd un peu en qualité avec le rendu Youtube. En bref, je suis toujours aussi content de cet appareil qui reste pour moi, un des meilleur rapport qualité prix dans sa catégorie. Bon Film à Tous !

Xiaomi FIMI X8 SE - 3ème Test en vol - Mode Sport, Orbit, Spirale et Landing Pad ! (24 min 0 sec)

Très Stable, Excellente qualité d'image, Nombreux modes de vol ...
Les - : à voir dans les prochains tests ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- FIMI X8 SE 403,08€ ( COUPON BGFIMIX8SE10 ) jusqu'au 30/6/2019 :
- FIMI X8 SE 359.10€ Gearbest ( COUPON 24HFIMIX8 ) :
- Accessoires FIMI X8 SE :
- Mon sac à dos FIMI :
- Landing Pad (Tapis d'atterrissage ) :

- PROMOS ET COUPONS BANGGOOD (Juin 2019...Continue Reading
Posted by rcheli168 | Today @ 04:32 AM | 373 Views
Emax Tinyhawk Indoor FPV Racing Drone RTF F4 4in1 3A 15000KV 37CH 25mW 600TVL VTX 1S

- 75mm Indoor racing drone
- 08025 brushless motor with durable ball bearing for increase flight and low maintenance
- Durable polypropylene plastic frame with propeller guards
- Motor beeper function. Find your tinyhawk after a crash
- Speeds up to 56kph
- Up to 4 minutes flight time on single battery
- Fast F4 Processor for smooth stable flight characteristics
- MPU6000 gyro for vibration free operations
- Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces
- 25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles
- Smart Audio function to change VTX channel via your transmitter
- OSD settings control to customize flight feel
- Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile settings for all types of flying feel
- Plug in type motors for easy maintenance
- 1s High Voltage (HV) 450mah lipo included
- Frsky compatible D8 receiver built in to FC
- Custom carbon fiber themed carrying case

Recommend parts (Not Included):
Frame kit: Click 75mm Polypropylene Frame Kit
Motor: Click Tinyhawk 08025 Brushless Motor 15000KV
Propeller: Click Tinyhawk Avan Propeller
Battery: Click Tinyhawk 1S 80C/160C HV 450mah Lipo Battery
LED LED Strip Light : Click 1M 2.5mm LED Non-Waterproof 60 LED Strip Light

Product Details
Model: Tinyhawk BNFversion
1 diagonal wheelbase (...Continue Reading
Posted by old4570 | Yesterday @ 11:06 PM | 587 Views
Motor Link
Prop Driver Link

I do like small motors , really I do !

Testing was with a 30A ESC - 2200 2s and a few props ...

6x3 = I saw between 2 and 2.3 amp with this prop . With the motor on my scales in a pusher configuration I saw between 85 and 90 grams of thrust .
5x4 = I saw between 2 and 2.3 amp with this prop . With the motor on my scales in a pusher configuration I saw between 85 and 90 grams of thrust .
5x3 = I saw between 2 and 2.3 amp with this prop . With the motor on my scales in a pusher configuration I saw between 85 and 90 grams of thrust .

Yes ! , I did copy and paste ! Because between the 6x3 to 5x3 there was little difference on 2s .

On a plane that comes in around 100 grams flying weight , this motor could be just the ticket !

Bullet prop driver !
I ordered some of these COS I need them ..
The EZIO might need one if I remove the factory prop .
The Firstar might need one ,
And the Racestar motor certainly needed one ..
For those motors with 1.8 to 2mm shafts , it pays to have a few of these handy .
Mine is a little chewed as I have been using pliers to tighten the prop nut .

Posted by UnknownForces RC | Yesterday @ 09:44 PM | 623 Views
1. Fully enclosed receiver box, provide better protection towards water and muddy conditions. With a transparent viewing windows underneath to aid routine maintenance work.

2. Fully enclosed with reinforcement strip batteries box. Improve structural strength and offer additional protection to your valuable batteries.
Posted by DoubleEagle | Yesterday @ 09:42 PM | 619 Views
***Building Blocks Remote Control Excavator and Wheel Loader*** Let the fun start!
CaDA (breaking blocks) Building Blocks + Remote Control Toys Series.

CaDA Building Toys STEM Learning and Educational Kit.
These bruilding blocks Excavator and Wheel Loader consist out of 544 and 491 pcs and are suitable for kids from 6 years old. Item numbers: Excavator C51057 and Wheel Loader C51058. Remote control is included.

Welcome to CaDA (breaking blocks) building blocks+remote control toys series!!!
As they click the parts together, they'll strengthen their hand-eye coordination, fine motor and problem-solving skills, how to follow instructions and spatial awareness. When they play with Doublee_CaDA STEAM series toys, they don't even notice they are learning. When they play, they learn and they learn specificaly a lot about engineering and technology.

CaDA building blocks toys are specifically engineered to develop the cognitive system, promote learning and provide hours of productive play/thinking.

For more building blocks and remote control toys visit:
Business enquires: [email protected]
Building Blocks Remote Control Excavator and Wheel Loader (CaDA Building Blocks) (1 min 38 sec)

Posted by UnknownForces RC | Yesterday @ 09:24 PM | 638 Views
GX1 2WD desert buggy (0 min 58 sec)

Posted by RC Roundtable | Yesterday @ 12:19 PM | 991 Views
Episode 83: "Handcuffs and Alligator Clips" is now live!

Lee is missing this time around, So Fitz and Terry talked about:
-FMS Flash (1:12)
-E-flite Havoc Xe EDF (10:00)
-Old School Model Works Javelin (19:45)
-Not-SMALL report (24:17)
-Fitz on Freefall RC podcast (55:35)
-E-flite F-15 EDF (1:00:12)
-Terry's F-15 crash confession (1:05:39)
-Fitz's workbench (1:13:48)
-Upcoming events (1:22:20)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us a line here, our facebook page, or email: [email protected].
Posted by 2sg1bigc | Yesterday @ 08:25 AM | 1,060 Views
Hi everybody, I have further information regarding the above boat plan, my earlier entry asked for information.
I now need to find a kind person living in Czech Republic who can assist me. I have discovered that the plan is available from :- RC REVUE. BARANOVA 31
130 00 PRAGUE 3 CZECH the plan number appears to be 061s. I even know the price but cannot register and set up an account on their site as it appears not to accept anybody outside CZECH ! I have sent 2 emails to [email protected] with as yet no response.
Is there anybody out there in CZECH who can help me.
Posted by GroundControlRC | Yesterday @ 07:56 AM | 1,071 Views
DustOff #2 - FlyBear SU-35 Micro ParkJet

Here is a link to the Video:

This tiny ParkJet has just been collecting dust for the past several months so it's time to Blow the Dust Off ;-)

This ParkJet is a bit Nose Heavy so watch our Tuning Flights to find the Sweet Spot for Nose Weight ;-)

Here are links to this ParkJet:

Flybear FX-820 2.4G 2CH Remote Control SU-35 Glider 290mm Wingspan EPP Micro Indoor RC Airplane Aircraft RTF

Flybear FX-820 2.4G 2CH Remote Control SU-35 Glider 290mm Wingspan EPP Micro Indoor RC Airplane Aircraft RTF

Here is a link to some batteries that will work as spares:

Eachine E010S Micro FPV RC Quadcopter Spare Parts 3.7V 150MAH 45C Battery

Eachine E010S Upgrade 3.7V 240MAH 45C Battery

Here is a link to our Review of this Plane:
Review - FlyBear FX-820 2.4G 2CH Remote Control SU-35 Jet (16 min 59 sec)

Here is the Flight that finds the Sweet Spot for the Nose Weight:
Flight 7 - FlyBear SU-35 Nose Weight Test, I found the sweet spot ;-) (13 min 16 sec)
...Continue Reading
Posted by Xemulxe | Yesterday @ 04:48 AM | 1,115 Views
This is the first launch of my new fishing and underwater video boat. I hope now there will be enough space for me under the normal “window to the underwater world”, and under the submersible module of underwater video surveillance, and under the fishing gear and everything else

Following the launch. Weight may be slightly less than the estimated 50 instead of 60kg. Everything else is basically ok. Because of the submersible video module, I was especially worried about lateral stability, but even here everything is ok. Stability with a margin.

RiverSpirit - first run of my rc / fpv ship (1 min 11 sec)

Posted by Balsaworkbench | Yesterday @ 02:14 AM | 1,178 Views
This one is sure to be popular. It's the 20 size version of the Bingo! by Doc Mathews. Ace used to sell kits of the Bingo, Bingo 40, and the Big Bingo (120 size) but as far as I know they never produced the 20 size.

It should be perfect for that Saito 30 or OS 26 Surpass that you have sitting around looking for a home.
Posted by rclad | Yesterday @ 12:06 AM | 1,230 Views
Air Masters RC Airfield
North Bend, OH
Friday, June 14, 2019

Hang on for a fun ride! I was flying my best inside/outside loop yet, with a 2 of 4 point roll at top, when things went horribly wrong.

IMAC Practice Flight - Intermediate Sequence - June 14, 2019 (10 min 15 sec)

Posted by marblekit | Jun 17, 2019 @ 09:51 PM | 1,251 Views
Posted by Wingmanrc93 | Jun 17, 2019 @ 09:22 PM | 1,268 Views
This kit started as a HK 500GT, but due to some faulty parts upon building it. But now had Align 500 frame,wish, mixer arms. Had a mishap with the tail belt(?) It broke so I added an EXI500 tail boom(same as the gt500 tail)

Turnigy typhoon 1900kv motor
YEP 80 amo esc
Spektrum H5010 MG on cyclics
Futaba 401/9254
AR610 2.4ghz with satellite
Running 2-3s 2800 30c lipos
Jazz 425 CF blade (GOODNCHEAP)/KDBB tail blades
I got 7+ min of flight time on a nice sport flight.

7 min of flight for 31.99 a set of batteries is a great flight time from the 3-4 min I was getting.

Flybared helis fly so nicely. It's a shame to see them fade away.