coriolan's blog View Details
Posted by coriolan | Sep 17, 2020 @ 07:40 PM | 2,136 Views
Here are some set-up for traditional RTP with only speed control to adjust altitude:
https://www.thertphut.co.uk/
http://yates.ca/sc/merrickville/events/rtp/index.htm
http://www.ctie.monash.edu.au/hargra...arthy_rtp.html
http://controlline.org.uk/phpBB2/vie...asc&highlight=
Some simple RTP planes:
https://outerzone.co.uk/browse_plans...lts.asp?page=1
In that method power to the motor is limited because of the loss in long wire wire. With the light R/C equipment available now it is possible to have the battery on the plane and use an ESC and servo to control altitude (and a single line to reduce drag). The little yellow "Ringmaster" shown weight about 1 1/2 Oz and powered with a 16mm GWS brushed, would have been lighter with brushless and one Lipo! The heavier the plane, the beefier the pylon has to be but larger planes can be flown outside on longer line much like a regular Control line (I was using a photo tripod as pole with a water jug attached to weight it). Haven't flown it for several years but might try again this winter Hope this help!
PS some relevant threads:
https://www.modelflying.co.uk/forums...p?th=34517&p=1
https://www.rcgroups.com/forums/show...9&postcount=11
https://www.rcgroups.com/forums/show...9&postcount=14
https://www.rcgroups.com/forums/show...60&postcount=2
https://www.rcgroups.com/forums/show...l#post36524344
https://www.rcgroups.com/forums/show...2&postcount=39
https://www.rcgroups.com/forums/show...e#post33933247
https://www.rcgroups.com/forums/show...Y#post28449487
And there is plenty more if you do a search for "RTP flying"
Posted by coriolan | Aug 25, 2020 @ 10:16 PM | 5,905 Views
Around the pole RC (3 min 4 sec)

Posted by coriolan | May 17, 2014 @ 08:40 PM | 90,848 Views
The test mule for the HK 1.7 gram servos, 3mm Depron and 40 grams AUW. Was meant to use a DPW brushless with GWS 3X3 prop but finally went with another motor and 5X3 prop. Rx is FlyDream 4 ch. 1 gram with HK 3A single cell ESC and 180mA batt. fly nice and not too fast despite the weight Was a quick build fro a few years ago languishing in the closet Was supposed to use the Spektrum ar-2000 servos but I wasn't too pleased with them!
https://www.hobbyking.com/hobbyking/s...c_0_075kg.html
https://www.hobbyking.com/hobbyking/s...ontroller.html
https://www.hobbyking.com/hobbyking/s...ht_3700Kv.html
http://www.rc-modules.com/page8.php?...=53&category=5
Posted by coriolan | May 21, 2012 @ 08:12 PM | 82,386 Views
This space will become my space for interesting threads I come along on RCG!
Started to do that on "Blast from the past!" but I will require more space
1/2A r/c boats:
https://www.rcgroups.com/forums/show...ight=1+2a+boat
1/2A c/l speed planes from the 60's:
http://good-times.webshots.com/album/561898542mtBypU
Aeromadeler magazine might be back
https://www.rcgroups.com/forums/show...59&postcount=1
RF module adapter:
https://www.rcgroups.com/forums/member.php?u=49900
Electric Cox .049!
https://www.rcgroups.com/forums/showthread.php?t=888673
Nice pictures, thank Kpriddle!
http://www.flickr.com/photos/nomad55...th/4582505333/
How to connect Futaba/Hitec modules into Aurora A-9 via port:
https://www.rcgroups.com/forums/show...&postcount=122
https://www.rcgroups.com/forums/show....php?t=1147689
Clarence Lee contact:
https://www.rcgroups.com/forums/show...01&postcount=3
Adapt Spektrum module to Futaba trainer port:
https://www.rcgroups.com/forums/show....php?t=1556607
HK-GT3B AFHDS 2.4ghz 3 Channel Radio System:
https://www.rcgroups.com/forums/show....php?t=1381904
The famous "Dart":
https://www.rcgroups.com/forums/showthread.php?t=599674
HobbyKing 4 channel HK-T4A Tx - 2.4 GHz: USER MANUAL
https://www.rcgroups.com/forums/show...ghlight=hk+t4a
https://www.rcgroups.com/forums/showthread.php?t=967207
Hk 5 ch brick rcvr controlled from spektrum transmitter
https://www.rcgroups.com/forums/member.php?u=52819
DX4 RF Module harvesting!
https://www.rcgroups.com/forums/show...&postcount=258
Interesting stuff from Panoramix's blog:
https://www.rcgroups.com/forums/show...45&postcount=1
Downunder's(Brian) blog:
https://www.rcgroups.com/forums/member.php?u=20702
https://www.rcgroups.com/forums/show...ostcount=16885
John Shannon's blog:
https://www.rcgroups.com/forums/show...-I-have-a-blog
Depron slicer:
https://www.rcgroups.com/forums/show...or-foam-Micros
https://www.rcgroups.com/forums/show...n#post44323493
Reversing controls on MLP4DSM Transmitter:
https://www.rcgroups.com/forums/show...61&postcount=8
Posted by coriolan | Dec 20, 2011 @ 02:18 PM | 83,076 Views
Very tempting project for my TD .010!
https://www.rcgroups.com/forums/show...postcount=4747
Or even electric
Posted by coriolan | Oct 27, 2011 @ 08:30 PM | 83,521 Views
One of these days I'll have to try on of these
Brushless Micro motor 0,16g 108000 rpm (0 min 55 sec)

Good infos in here:
https://www.rcgroups.com/forums/showthread.php?t=596219
Posted by coriolan | Sep 13, 2011 @ 07:57 PM | 83,827 Views
Totally off topic but the music from the movie "O Cangaciero" has been in the back of my mind for awhile and I've done some research on Virgulino "Lampiao". Here is the old version from his time in the 30's,it was recorded in 1957 and the singer is an ex-cangacieros("Volta seca" the nickname of Antonio Alves de Souza) from Lampiao's group; it was sung during the failled attack on Mossorro in 1927!
Volta Seca - Mulher Rendeira (versão original) (2 min 26 sec)

And the music from the 1953 movie:
O'Cangaceiro - Mulher Rendeira (1953) (2 min 32 sec)
...Continue Reading
Posted by coriolan | Sep 06, 2011 @ 01:13 PM | 84,031 Views
Cleaning up the hobby room while preparing to move I found that old pop-pop experiment from many years ago. Its about 12" long carved out of pink foam and was using standard size servo/Rx+ a 500 mA Nicad pack! Was using Willesco solid fuel and ran for about 5 minute on two tablets, wont be moving to the new place so it will live only as picture
http://en.wikipedia.org/wiki/Pop_pop_boat
Posted by coriolan | Aug 02, 2011 @ 01:27 PM | 84,844 Views
A new bird for the Flydream 1 gram Rx, 16" span and the faithfull AD-C5 on one cell R.E.T with two AS-2000 servos. It fly Ok with a 4.5"X3" GWS and one Zippy 240 mA. 3mm Depron wing and 1/16" balsa tail with 4mm carbon fiber tube in between!
Posted by coriolan | Jun 05, 2011 @ 06:31 PM | 84,523 Views
It has flown finally, here is what it look like in its final configuration
Posted by coriolan | May 21, 2011 @ 06:49 PM | 84,748 Views
Off course, now that I am ready to fly this week-end......it's raining
Fortunately the week-end is still youg and if the world doesn't end today at 6pm as claimed by that Californian's sect I still have sunday...and monday (a holiday in Canada)
Posted by coriolan | May 20, 2011 @ 09:47 PM | 84,704 Views
Added the landing gear today (1/32"music wire) and glued the foam cowl on the firewall. The total weight with motor,prop,esc is now 28.3 grams. That leaves me some elbow room for my choice of servo, I feel that even if I use the FD 2.5 gram servos and 240 mA Zippy I will still be under 45 grams rtf
I have another plane on the assembly line which will use two Toki and I don't really want to use AS-2000 on that plane. I have two more of these Rx so might build another "Guided Mite " by Ralph Bradley
http://www.parmodels.com/ralphs_models.htm
Posted by coriolan | May 18, 2011 @ 12:41 PM | 86,048 Views
The first bird for my Flydream 1 gram Rx, inspired by these Frog FF models:
http://www.houseoffrog.co.uk/
At 14" span its kind of between the junior and senior serie, the wing is 3mm depron with sanded airfoil and the fuse mostly 1/16" balsa with lightening holes and covered with red solite. The top fuse in the front is sanded 9mm depron. So far it weight 24.5 gram with motor(AD-C5 /3700Kv)so I am still wondering about using Toki servos,AS-2000 or the Flydream which weight almost 3 grams. It will be RET and one cell (180<240 mA)and the prop is GWS EP-4530 which give good performances with that motor, the esc is the excellent TGY DP 3A. Since I have several of these Rx I have other builds in the pipeline
Posted by coriolan | May 17, 2011 @ 04:25 PM | 52,669 Views
Got my stuff from RC-Modules after a little custom delayMade my "Plantraco monolith" style module adapter which I can use with appropriate trainer plug to fit various Tx (Hitec/Futaba-DIN,Futaba square and Airtronic 5 pins-DIN).A nice touch from RC-Modules, all my Rx had been tested and bound to my DIY module so it was plug-and-play expect for my "monolith" variation! Here are a few picture of the system, the Rx is really small and does weight only 1 gram. I tried it with a single cell and also with the 5V bec of a CC Pixie-7 and the servos have a good speed with one cell or 5V. The servos weight a bit more than the supposed 2.5 grams but still a bit less than 3 grams likes the infamous BA 2.5. Off course I am in a flurry of building with all these micros flight packs. For the really light stuff I'll use my Toki servos and maybe the AS-2000. Would be swell if FD could come out with an actuator capable Rx including a small 2<3 Amps brushed esc
Posted by coriolan | May 10, 2011 @ 11:08 AM | 50,169 Views
Time to investigate that great idea from EQMOD about converting a small servo board to actuator driver:
https://www.rcgroups.com/forums/show...1&postcount=13
Since I'll soon be getting those nifty 1 gram Rx from Flydream to replace my troublesome and expensive MicroInvent system.
Posted by coriolan | Apr 22, 2011 @ 12:18 PM | 45,983 Views
Did some RTP experiment last year, the weather is turning nicer now so I'll resume. Build a small profile "Ringmaster" for that with r/c assist. Fly nice with the IPS &3X3 DD prop but I have to work on the line length,too short makes it impossible to do stunt since my photo tripod is relatively low over the ground! Its very zippy on 2 cells but the Cox dacron line has too much drag for longer than 20 feets. Will try .008" steel wire next
https://www.rcgroups.com/forums/show...&highlight=rtp
A good source of inspiration for classic c/l planes,some nifty folded paper display models which could be adapted to RTP:
https://www.rcgroups.com/forums/show...51&postcount=5
http://digilander.libero.it/ucontrol...paperindex.htm
Posted by coriolan | Apr 21, 2011 @ 01:41 PM | 45,481 Views
I have some goodies on the way from RC-Modules,namely a few of these 1 gram 4 ch. 2.4Ghz rx and decided to revive my old micro "Todd's Tiny" which I had to put away last year because of troubles with the original MicroInvent minor. It is 12" span with 3 toki servos and Microbatic outrunner. It uses V-tail mix off course and A/R mix and uses the HK 3A esc and one 100mA cell.A bit fast for indoor because of the KFM airfoil When my MicroInvent started to act up I didn't really wanted to spend another $80, and wasn't quite trilled with either Plantraco or Spektrum AR-6400 so when FD cames out with that nifty 1 gram Rx for only $20 I jumped into 2.4 Ghz. The transmiter module+Rx for FD cost the same as the Plantraco brick alone,the AR-6400 would have required a Spektrum module and the Rx brick is a bit heavy at more than 3 grams and not flexible in installation because of its configuration. There is a big thread in the radio forum about the FlyDream system:
https://www.rcgroups.com/forums/show....php?t=1207547
And even a dealer right in the US, which makes support easier!
http://www.rc-modules.com/page1.php
This will revive my indoor interest
Posted by coriolan | Mar 31, 2011 @ 02:34 PM | 44,675 Views
Some more progress on the 2011 build! The outrigger is now complete and did some more work on the semi-scale hydro. The no-trip chin is in place and working on the front end with lot of sanding and carving left! Cox International came out with a nice "Texaco" style head for Cox/Norvel .049 which accept CI,Merlin/Globee plugs so I'll get some to get some extra cooling of the head (don't beleieve in water cooling for small engines). In the mean time I'll experiment with using only one cell Lipo to power the Rx and servo. Many Rx & servos work fine on 3.7V (just a tad slower).