Posted by Tazkiller85 | Jun 06, 2020 @ 05:01 AM | 5,010 Views
Yep Les Amis,
Du Bon Gros Matos ! Pas donné mais EXCELLENT ! Je n'ai plus de place dans la description pour vous faire un résumé mais tout est dit dans la vidéo ... Bon Film à Tous et Merci de votre soutien .

TITAN XL5 iFlight - Review Test Démo and Crash - RIP la Gopro Héro 7 !!! (40 min 28 sec)

NOTATAZ : 18.5/20 Du Bon Gros Matos !!!

Niveau : Confirmés
Les + : Bien réglé sortie de boite, Bonne conception, très résistant, Très bonne caméra (Ratel), VTX performant, Un TOP dans cette gamme de prix !
Les - : Pour chipoter un peu, ils auraient pu mettre une XT60 noire et des tubes d'antenne plus longs et offrir le support Gopro, pour le prix ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
- Chez Banggood :
- iFlight TITAN XL5 6S ( coupon bGhOnEy10 ) :
- iFlight TITAN XL5 4S ( coupon bGhOnEy10 ) :
- iFlight TITAN XL5 HD 6S :
- iFlight TITAN XL5 HD 4S :
- Support Gopro réglable :
- Accessoires et pièces TITAN XL5 :
- Hélices Nazgul 5140 :
- LIPO iFlight FULLSEND 6S 1300mAh 120C :
- LIPO CNHL G+PLUS 5S 1500mAh 100C :
- LIPO GAONENG 4S 1500mAh 110C :
- Chez iFlight :
- iFlight TITAN XL5 4S et 6S :
- iFlight...Continue Reading
Posted by Tazkiller85 | Jun 06, 2020 @ 05:00 AM | 4,893 Views
Yep Les Amis,
Un Excellent Tiny ! Il s'est fait attendre mais il est enfin là ! J'ai en test aujourd'hui le UZ65 de chez Eachine. Une très bonne surprise au déballage et à la mise en route. Bien équipé et plutôt bien conçu, ce petit 65mm possède des hélices tripales de 35mm qui lui donne une bonne puissance, ainsi qu'un VTX séparé de la carte de vol switchable en 25 ou 100mw et tout ça, monté sur un petit châssis résistant au chocs. Les pré-réglages sorti de boite sont bons et le pilotage très agréable ! Mis à part un FOV un peu restreint, je n'ai pas grand chose à reproché à ce nouveau Tiny de la marque pour une somme de 74€ avec un coupon. Bon film à tous, prenez soin de vous et à très vite ...

Eachine UZ65 - Review Test Démo - Et une livraison surprise ! (24 min 14 sec)

NOTATAZ : 18/20 Enfin là !!!
Niveau : Débutants et Confirmés
Les + : Résistant, Qualité d'image, Portée vidéo, Bons réglages d'origine, Facile à piloter, Autonomie VTX séparé, Caméra orientable ...
Les - : Chargeur USB pas top, FOV de la cam un peu court.

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Eachine UZ65 ( coupon BGEAUZ65 74€ ) :
- Pièces détachées et accessoires UZ65 :
- Lipos 300mAh lot de 5 :
- Chargeur multi 1S Lipo/Lihv :
- Alimentation 4-24V :
- Colle jaune Antennes Ipex...Continue Reading
Posted by returntohome | Jun 06, 2020 @ 01:59 AM | 4,427 Views
My first model would have been a hovercraft I made for a school project it was quite small made from lolly sticks covered in tissue, I made the fan from tin, and it had aa cells. It worked and I got top marks.
This prompted a bigger hovercraft with a spitfire diesel engine,it worked well when I could get the engine started.
I went through the model car stage with tamiya beach buggy,. My brother had one and we raced each other.
I bought a second hand racing boat with a glow engine just after I got married,. Had some fun with it but it could be hard work starting and conked out in the middle of the lake many times.
I built a hydrofoil from a kit powered by NiMH battery. It worked well.
Eventually I decided I would learn to fly so joined a model club , made some new life long friends. I built a small scale Piper cub from the sig kit it was lovely covered in nylon and painted with the sunburst scheme, even had opening doors and a pilot.
Got interested in petrol engines so I put one in a second hand T240. It had never flown so was like new. I joined the LMA (large model ass) and went to a meeting where Ian Turney-White took it up for me. He is famous for massive bi planes at the shows. I did the landing and bust the prop, but was pleased I got down in one piece.
I joined a lovely club ,very friendly we flew at a field near Thorner in North Leeds, but moved to acaster malbis near York on some old runways, great place.
Joined North Leeds...Continue Reading
Posted by KristofferR | Jun 06, 2020 @ 12:47 AM | 5,122 Views
FunCub evening flight:

Multiplex FunCub evening flight (2 min 51 sec)

Posted by jmxp69 | Jun 06, 2020 @ 12:28 AM | 4,150 Views
This is the first look at the 63" Dynam Smoove Balsa ARF
Massive 63" F3A Pattern Ship RC Plane - First Look (20 min 58 sec)

Posted by Blaze0021 | Jun 05, 2020 @ 04:32 PM | 5,911 Views
I'm pleased to show my next custom RC work - Project Chimera. Callie Graphics pulled through with my custom decals last week and I was finally able to apply them on my project, which is a highly modified 3-year old BlitzRCWorks Deltawing 50mm EDF Jet.

BlitzRCWorks Deltawing 4S 50mm EDF Jet - Project Chimera (3 min 26 sec)

This was a little EDF jet that I picked up from Banana Hobby 3 years ago for $65, and was a surprisingly excellent jet on the stock 3S system. But the stock color scheme was absolutely awful. My friend Brad offered to change the scheme with his airbrush skills, and I accepted his offer.

The overall appearance and high agility represented the Dassault Mirage 2000, so I chose that main scheme. Interesting enough, the side profile also has hints of the F-16 (with its bottom intake scoop and vertical fin), and the turtle deck reminds me of an A-4 - Hence, I nicknamed it the Chimera (the Greek mythical creature which composed of parts from different animals).

The stock 3S system has also been replaced with a 4S setup. A dynamically-balanced XRP 4S 50mm 11-Blade 4200KV Unit has been drop-in fitted, and a ZTW Beatles 40a ESC with 3a SBEC has been installed.

Durability was also a factor. A custom bass wood block has been mounted in the underbelly of the nose section with a curved music wire strake. This acts as a shock-absorbing nose skid that prevents the nose from digging into the grass or turf on landing touchdown. The front intake and intake...Continue Reading
Posted by Alphonso | Jun 05, 2020 @ 11:11 AM | 4,747 Views
Clear canopy from Parkflyer Plastics
4/1 mix of Tamiya X24 Clear Yellow and X26 Clear Orange, then one VERY thin coat of Tamiya PS Translucent Silver. On the inside obviousl.
Build the yellow up very slowly until its deep and even. It's difficult to spray evenly on a concave surface and hence avoid runs. One run and you'll want to start again The translucent silver needs to be as thin as possible to maintain the most transparency. After masking the outside, use some tape to hold and spred the canopy apart on a surface then from a good distance, spray one, and only one steady and wide spray of silver. Don't be tempted to spray again if you think you missed a bit. Some overspray will have rested and if you remove the masking and place it on the model in sunlight, you'll see the quite scale and suble effect.
Posted by GroundControlRC | Jun 05, 2020 @ 07:01 AM | 5,582 Views

DustOff #6 - Volantex V765-2 Super Cub 750mm PNF - Flying it like a ParkJet ;-)

Volantex Super Cub V765-2 750mm RTF with Gyro

Banggood GCRC

Here is a link to the Video:

This was one of my first Traditional Planes and is still one of my Favorites ;-)
It has plenty of power with the 2S Power System, it's very durable, and very fun to fly.

Here is the Playlist for this Volantex Super Cub:

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #SuperCub #VolantexSuperCub #V765 #DustOff

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

***The New Version is RTF and comes with a Gyro.
Volantex Super Cub V765-2 750mm RTF with Gyro

***Spare Stock Prop
Volantex V765-2 Super Cub 750mm FPV Aircraft RC Airplane Spare Part 7040 Propeller

***Spare Prop (I MOD'd the Prop Shaft and use a different Prop with a Collet - See Video Below for MODs)
2pcs KMP 7040 7X4E 7*4E High Efficiency Propeller Blade for RC Airplane

MODs & Testing - Super Cub - 4 MODs that make a Difference ;-

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups
Posted by Bella Liu | Jun 05, 2020 @ 03:50 AM | 5,338 Views
For stopping and containing any fire caused by incorrectly charging or poorly functioning lipo packs.
Buy it with factory price with ONLY $2.69/pcs if you buy 100pcs. You can also customize it with your company logo!!

- The safest way to charge and store your lipos.
- Protect your workshop, family and home from the hazard of lipo
-The LIPO SAFE is intended to reduce the chances of damage o charging.
- This is a fireproof bag, designed to stop and contain any fire caused by incorrectly charging or poorly functioning lipo packs.

-Never leave charging battery unattended.
-Always ensure the battery is on a non-flammable surface.
-Ensure flap is sealed while charging.

Pacakge Include:
1 x safe guard charge bag (235*65*180mm)

Get connected with US here!

Email: [email protected]
Skype: Bella---DTN Whatsapp:+86 15818289223
Datton Electronic Tech. Co.,Ltd
Posted by turbinefancy | Jun 05, 2020 @ 03:39 AM | 6,553 Views
I just setup a new DJI Digital FPV system on my old Taft Cobra Jet. Also improved looks of the instrument panel using pictures from a real F-5E cockpit. Here’s A training flight showcasing how well the DJI FPV camera handle low light situations.

Cobra RC Jet FPV Training (4 min 5 sec)

Posted by old4570 | Jun 05, 2020 @ 03:35 AM | 5,746 Views
V911 HLG (0 min 37 sec)

My 3D printed HLG ..

It be a one off 3D print experiment , but there should be a F949 flight board in the mail .

So there might be a more refined version of the V911 HLG in the near future .
Posted by Bella Liu | Jun 05, 2020 @ 03:13 AM | 5,149 Views
Quality Tools are essential to all hobby players. Here! you can find the complete types of what you want for repare and DIY. Logo Customization is available!


1.5mm Hex Driver
2.0mm Hex Driver
2.5mm Hex Driver
5.5mm Box Driver

4.0mm Box Driver
5.5mm Box Driver
7.0mm Box Driver
8.0mm Box Driver

Colours available: black, red, purple
Materials: Nano-titanium high-speed steel, SKH-51 imported from Germany
Logo customize: available

The best quality you can find.
Posted by Amanda BH | Jun 04, 2020 @ 10:41 PM | 5,911 Views
anybody could share your Brotherhobby Avenger 2806.5 building ?
Posted by GEMFAN ts | Jun 04, 2020 @ 09:26 PM | 6,409 Views
Hey Hey Hey! Gemfan New Gates coming😻😻
How many new types you find?
Posted by HGLRC Company | Jun 04, 2020 @ 08:57 PM | 6,009 Views
Pre-order now and get a free 2306.5 motor, free HGLRC cap. For first 30 orders only!
Name: Sector5v3_1920_1000.jpg
Views: 0
Size: 1.43 MB
Posted by old4570 | Jun 04, 2020 @ 08:48 PM | 5,756 Views
Micro F16 Video 5 (5 min 40 sec)

Yes it flies !
Still hunts up and down a little ( rearward CG ) , but it flies .
Motor did not cook the prop off the output shaft ! = Thats nice .
Maybe one more bit of lead shot in the nose ?

But it flies
Posted by lawrence4 | Jun 04, 2020 @ 08:03 PM | 5,999 Views
Space Shuttle Test SUNNYSKY X2212-9 1500KV (6 min 27 sec)

Motor: SUNNYSKY X2212-9 1400KV
Weight: 530g
3S 2200mAh
Posted by Mad_angler1 | Jun 04, 2020 @ 05:28 PM | 6,924 Views
Ardupilot Copter Build Series

I have started a new Ardupilot copter build series where I will be walking though the steps to setup a Copter based hex from start to finish.

In this series I will also be deep diving into some of the more complex hardware setup with multiple GPS, Mag sensors as well as other external sensors.

The series consists of

Video 1 - Basic Hardware - Frame,Motors & Power System

Video 2 - GPS - Serial and CAN as well as multiple GPS blending options

Video 3 - Compass - Mag setup and overview of the new Compass configuration in Ardupilot

Video 4 - RC Types and Setup - Looking at Herelink, Sbus and other RC options.

More Videos to follow.

Video 1 Basic Hardware

Ardupilot Drone Build How-To Series Part 1- Basic Hardware (30 min 40 sec)

Video 2 GPS Setup

Ardupilot Drone Build How-To Series Part 2- GPS Setup (17 min 57 sec)
...Continue Reading
Posted by RanGee75 | Jun 04, 2020 @ 12:14 PM | 4,478 Views
Hello all,
Check the new Lightbutner afterburner for the Arrows Mig-29:

Here's a build and afterburner installation video:
Arrows Mig-29 unboxing build and Lightburner installation video (49 min 24 sec)

Posted by unboxingexp | Jun 04, 2020 @ 11:47 AM | 5,505 Views
Tinywhoop with micro HD camera (1 min 31 sec)

This is probably the cheapest way to get hd footage from your tiny whoop. I installed a 5$ sq11 camera on top. In order to save weight I decased it. Quality of the footage is still mediocre.